Reviews
Necessities
Purchased for front axle shaft removal and attachment for tire replacement on GSX-R1000. It is very accurate, perfect fit, and safe to use. View detail
It is intended as an alternative to in-vehicle tools and for emergency use on the road.
The ZX-6R has an on-board tool storage compartment in the back of both the Tandem seat and the optional Single seat cover, but to use it, the storage bracket must be removed with a Hexagonal Wrench. It is very inconvenient though it is appreciated.
Since the servo motor of the exhaust device was removed to replace the external Slip-on Silencer, we decided to use the space to enhance our on-board tools and purchased this Compact with a minimum of tools.
For suspension setting, the Rear rebound damping force cannot be adjusted here, but I don't think this is a place that needs to be changed frequently in terms of usage. I have made a judgment on this.
Front can be used for each adjustment point.
I think it is better to prepare proper tools for daily maintenance, but I think it is better to separate it from emergency use on the road.
View detail
Easy Plug replacement
I've been using the OEM plug wrench for a while now and it has definitely made my work easier. View detail
Used for gsx-r1000
Purchased this product because OEM dedicated tools are expensive. The hex angles are highly accurate and do not rattle. View detail
To the last (Urgent) tool
It is not easy to use and is not good for emergency use. View detail
I changed my on-board tools to these.
Purchased because on-board tools are difficult to use and tacky.
Size, weight, etc. are omitted as they are described on the product introduction page of the manufacturer, etc.
Compact has all the tools necessary for in-vehicle use, thanks to Yamashiro, which handles a wide variety of Motorcycle products.
When I used it, I felt that it was nice and stiff when I stretched it out to use Driver and other products. Moreover, since this hardness can be adjusted, it can be retightened even if it loosens after long-term use. (Wrench and others are fastened with Snap using plastic, so they cannot be retightened.)
It is also nice that if it is placed in the included Case, even if it is removed from the in-vehicle tool mounting position, Driver and others will not be able to catch it and tamper with the inside.
View detail
It works pretty well
I used it because it was cheaper at Motorcycle supply stores.
It is comfortable to the touch and has excellent elasticity. It is warmer than a thick trainer and will be useful this time of year.
The list price is quite high, so we do not recommend purchasing it, but if you see it on Sale, it is worth getting.
View detail
Fit feeling is good.
Installed on a PCX125.
We have used NeopreneType before and were very comfortable with it, so we decided to use the same Material this time as well.
However, the thickness of the part that operates the Blinker switch (left hand thumb) has been increased to improve durability.
I preferred the previous thinner one for ease of operation.
View detail
A must-have!
I bought it as a side purchase. Material without permission:I thought it was Rubber but it was made of plastic. It is thick and solidly built.
The cord, which I thought was a bonus, is quite solid and would be an Advantage for similar products not included.
The bicycle parking lot is full of STAND marks and will be used as soon as possible.
View detail
For everyday use
I bought this for everyday city use, in addition to the Helmet for Touring. This time it is Repeat. The inner cushion is washable, which is good for the price, and the chin strap is easy to put on and off with one-touch. The inner cushion is washable, which is good for the price. View detail
For Plug Replacement
I bought this to replace a plug in my Naked motorcycle, with Magnet so it doesn't fall off after it comes off. View detail
Fits: YAMAHA SR, HONDA CUB, HONDA CT110 HUNTER CUB, HONDA REBEL, HONDA CB750F, KAWASAKI Z900RS, Others
I want it to be equipped with a chitinous Buckle.
The FakeBuckle is easily detached while running. Side flap opens outward. View detail
Easy Touring
Installed on CYGNUS X.
After all, long distance (It's 125cc, so it's about 300Km.) It was really easier to run than I had imagined.
I was afraid of damaging the Accelerator grip because it was very hard when I installed it on the Accelerator grip.
View detail
Safe to have
Having one in each car is a great way to use it on the go. View detail
price-worthy
It cracked within two months of being put on.
Too bad
View detail
We have all the Size you need.
I was worried about E-Value Tap dice set EV-20TD 20PCS, which is often sold at Home center in the same price range.
I bought this one because there are 2 Pitch size Tap and Dice each in M10 and M12.
The fact that it is also sold by Yamashiro is another reason for its selection.
I am a little hesitant about this type of tool unless it is a product sold in stores.
I immediately expanded the screw holes in the Fog Lamp from M5 to M6 and used it to clean the screw holes in the Large and Under Guard. Of course, Dice was also used to clean the screws.
View detail
Good Humidity Control Product
Very usefull product as well. Take control a smell over your gear after take a long riding. Good quality and meterial. Easy to use in any condition Design are perfect for any helmet Fitting not to perfect, but worth it View detail
To avoid damaging the floor with the Transporter
I purchased this as a Side Stand receptacle when transporting a vehicle by Transporter.
This is not a problem if the vehicle has a well-machined floor, but when Tie Down is applied with Side Stand on a carpet floor, if the Tie Down is applied too tightly, the STAND will again dig into the vehicle floor, damaging the floor.
To prevent this, the floor is less likely to be damaged because the pressure is dispersed when such a board is laid down. Also, it is possible to apply a firm "Tie Down" even on soft floors such as carpet.
Basically, I leave it loaded in my car and use it when I use Transporter.
View detail
Eliminate that nasty feeling in the Helmet!
[How is it used?
I bought this product because I wear it for long hours touring and I often wear Helmet in summer, but I didn't want to wear it next time because of the gloomy weather. I was happy with the cosmetics.
Was the one you received as per Image?
The Type used for assembly was different from the Image, but it was generally as shown in the Image. I think it is good because it can be made to take up less width when not in use.
How was your experience with it?
The size can be adjusted with Velcro, so you can choose the size that is exactly right for your helmet.
I find it a little tedious to put it in Helmet every time, so I use it on a daily basis.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Convenient
Purchased for Mold prevention, deodorization, and moisture control
The prices are reasonable, especially for the Jet Helmet, the
If you have more than one full face
It is very recommendation when storing
There was one for Wear.
It looks like that one is no longer on sale.
View detail