Reviews
Intermediate Mount Crime Prevention
Here are some pictures from unpacking to assembly. It was Large odd because the cat was in the way.
There are two types of intermediate mounts:hand-tightened and Wrench security, but KaEdiaBody has a conversion circuit.
I chose security because I had it and it would be a painful expense if it was pulled out.
As explained in the photo, the outside of the wrench and the groove of the wrench are turned with a special Wrench.
The part was of a structure that rotated idly and could not be turned when it was turned to steal it.
I didn't really understand the structure until I opened it.
Our Motorcycle was unified with SP CONNECTO, but the new ContiGT650 is a newcomer.
I could not install it with Separate handle and chose this one via 1 inchBall.
The ball also comes in 15mm, 17mm, and 25.4mm (1 inch), so I was a bit confused at first.
Body side 1 inchBall is a type that is attached to the Top Bridge, Hachioji Re-ARAI's.
The Option was lightly over $20,000 for this alone with the Original product.
View detail
With Smartphone Holder
I bought it because I heard that the iPhone Camera is prone to breakage due to vibrations from the Motorcycle. I am not sure how well it works since I have only driven about 100 km after installing it. View detail
The quality is good, but a bit expensive.
I have been using a SYGN HOUSE mounting system for over 10 years now. I am thinking of replacing it when it breaks, but it does not break easily. It is not a part that is always in operation, does not interfere with other parts, and does not rust or get scratches. It is quite sturdy. Currently, I have installed this on both VINO and XJR1300, and am replacing the top part from B Parts. (Smartphone Holder is already installed on the Others separately.)
However, you can get a Smartphone Holder at a reasonable price at each SiteShop, so there may be no need to choose this product, but just to give you an idea of the advantages of this product, we recommend the following
・Luxury texture
High durability
Scalable with a combination of Base, Arm, and Holder
I think that is what this means.
By the way, for my own use, I use Panasonic's GORILLA. A-14 PNDWaterproof I put it in a transparent Case called "Transparent Case" and installed it in the Handlebar. Unfortunately, this transparent Case seems to have been dropped from SYGN HOUSE's LineUp. I have been using this method since the days of the mobile phone, but now I check the running Route exclusively with the phone attached to the Holder, so this one is mainly for checking the overall map and listening to music. (The surface of the Vinyl case can be operated through the leather gloves & through the case)
I think it is a recommendation for those who want to get satisfaction from the quality of the product. However, it is rather expensive if you have all the ABC parts.
View detail
convenient stand
My motorcycle is YAMAHA XMAX300. There is no place to install the extended recorder and mobile phone holder on this car, and the bundled installation is not very stable, so I bought this ATOP extension holder on webike. This holder is installed on the windshield. It will not block the dashboard, nor will it take up the handlebars. There are many installation positions on it to easily install mobile phone holders and recorders, which is very convenient. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. This bike is not installed with the position of the expansion recorder and mobile phone bracket. The bundle installation is not stable, so I buy this ATOP expansion bracket on Webike. This stand is installed in the windshield position. It will not block the dashboard, nor does it take up the handbars. There are many installation locations that can be convenient to install the mobile phone bracket and recorder, which is very convenient. Powered by Google Translator View detail
Screws to attach to Navigation are required separately
I bought this to install on my Nankai Navigation for Motorcycle. With the cheapo base that came with it.
It's different and far more durable! It didn't fall over from wind pressure and I'm Large satisfied!!!!
One thing to note is that the size is not exactly the same as the included pedestal, so you will need to purchase a separate stainless steel pedestal.
I bought more screws from Home center and installed them.
View detail
I used it to install a voltmeter!
It was used to install a Ditona voltmeter on a Multi Bar.
Just fit! I think it's a Level that can be called an exclusive product!
A little expensive for a small?" I thought at the time of purchase that the quality was high, but no problem!
Very Recommendation!!!!
View detail
I use it on my iPad Air5.
Purchased for use on a tabletop or in a car, not for mounting on a Motorcycle. I use it with other Suction Cup type, Clamp, Arm and other Ram Mounting systems.
I usually carry around my iPad Air 5 with a Case that can also be used as a STAND, but I don't like to remove this Case and attach it to the Holder every time, so I was looking for a Holder that can be used with the Case still attached. RAM MOUNTS RamMount TabTight for iPad (1st-4th Gen) I decided to try the As a result, it can be used normally with the Case installed. Charging in this state is also “somehow”possible.
The product is not used in Motorcycle, but in daily life Level, and there has been no drop in this state so far.
View detail
For use with the Camera for Drama Recording
It was purchased to divert the Band portion of the product, not for its original use.
When replacing the rear blinker, I needed to stick out the Camera of the DVR to avoid interference, which was not possible with the bracket that came with the DVR. I figured that if I removed the rubber sheet that came with this product, I could get it to work, and it worked.
The product was useful in unexpected ways.
View detail
Looks like it's new.
I purchased and used it several years ago. I purchased a new one this time because I purchased SecondMotorcycle.
There were Long, Semi-long, and Short, but I bought the Semi-long.
The difference from the previous version is that the head of the bolt is now triangular instead of polygonal. The triangular head is easier to turn, and can be turned with gloves on.
It is well made
The price is high, but considering the possibility of losing the phone while driving and replacing it due to deterioration, etc., I think it is worth buying.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI 1400GTR
Installed in 2023 MODEL zx6r
Used with gopro to shoot Circuit running video.
Since the mount is a RAM Mount, the size of the ball section is
I was worried because it was a little different.
I was able to use it without any problems.
View detail
Best Features
It is very Universal and can be positioned freely.
Circuit also holds the Time measurement device well.
View detail
Easy to install.
I am using it as a bracket for the Timea Tucker on the top of the RightFront fork of my ZX-6R (2012), which is used only for circuit driving. The ring is easy to install because it splits into two parts. There is no loosening after installation, and it feels good to use.
It is also good that tools (Inch size) are included in the package.
View detail
I bought it to install a Radar detector.
The installation was done exactly as desired. The texture is perfect. View detail
Bought to use Radar detector
It is well made and the Radar detector is secured as desired. View detail
Used to fix voltmeters
It is inexpensive compared to other products. It can be installed anywhere.
It is a good item
View detail
There was one for a Large-ish phone!
It has been about 18 months since I purchased Ram MountBody in September 2020. During that time, I used it about 1-3 times per month when Touring, and before I knew it, theRubber was shredded.
I had a feeling that it would break off at some point, since I had been stretching the Rubber as hard as I could to fit it into the largest one I could mount (iPhoneXS Max).
I had no choice but to replace only Rubber, so I pulled up the Ram Mount product list...?
Fa Brett." ? What does that mean? → I heard this is what they call the middle Size between a smart phone and a Ta Brett (I've never heard of it before). If my sma... Fa Brett." ??
So I bought this Size to try it out.
As it turned out, it fit perfectly!
I wonder if this Size has been around for a while? I'm glad I found it.
View detail
For Large-eyed Smartphones
Purchased for spare parts.
I'm currently using one for a phone up to about 5-inches, but I've switched to a larger phone, so I'll replace it when it runs out.
I've applied a MAJOR amount to the image so you can see how large it is, if you want to check it out.
View detail
A little evolution
I thought it was out of stock for a while, but it came back with a model change.
According to Manufacturer's announcement, the Knob shape and the angle adjustment range are the two large changes, and the latter can be seen in the wider opening of the actual product.
It's not hard to turn the knobs with ArmSingle Body, so what's the point of this change? The question arises. However, when I put it on the body and try to adjust it by reaching out with my hand while riding, it is certainly easy to turn.
I replaced the Arm with a RAM Mount, but the quality is still exceptional, and I think it is a product that gives off a sense of existence even now that the mounting system is no longer a special thing.
View detail
On the REMOTE CONTROLLERBracket of the Drrorecorder
I use it as a Bracket for my Mistuba Sankoit EDR-21 REMOTE CONTROLLER. The size of the bracket is very small and the handlebar is not too tight. View detail
To prevent theft.
Using Ram Mount, I have attached Charger of LIVE BUE REMOTE CONTROLLER of SONY, I purchased this product for its theft prevention.
Easy to install on Ram Mount Arm.
I've been using it for touring for about 2 years and it's very reliable, no problems using it in the rain.
It's a little tough!
View detail