Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
The tip is Perfect
The appearance is very nice! The sound is Japanese Vehicle Inspection Correspondence, so it's not large, but it's better than I expected.
Note, however, that those who have a NITRON or OHLINS Preload Adjuster installed on the Rear Suspension cannot install it unless they purchase a separate Over Transfer Plate.
I couldn't ride on the day I installed the Exhaust System because it wasn't written in the Webig….
Over's Site had it right.
Other than that, it's great!
View detail
I am Large satisfied with the power that exceeds my imagination before the replacement!
First of all, the sound quality is beyond my imagination!
The heavy bass exhaust sound is irresistible!
Acceleration seems to increase quickly from the middle.
The light weight of full titanium is also nice!
The price is not cheap, but I am very satisfied.
View detail
Highest quality material exhaust on offer
About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View detail
It is easy to install.
[How is it used?
I'm playing around in the prefecture.
Was the one you received as per Image?
Silencer and Pipe are beautiful as per Image
Was the installation difficult?
Other Exhaust System seems to be necessary to turn off Cowl.
I was able to remove Cowl and pimp it.
If I had to guess, I'd say it's a good idea to put a Silencer band on it.
It's like I'm out of touch.
How was your experience with it?
AfterFire when embracing? It becomes like a pan.
I am satisfied
[Included Parts:were they on?
There was no tool to hook Gasket and Spring.
Spring can get by with Radio pliers
Only Gasket was purchased separately.
[Was there anything that disappointed you?
Exhaust pipe Limit to Drain hose
Also, you have to think about the routing of the Oil tempSensor wire, or the wire will
It could melt.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
สวิงอามสวยงาม แข็งแรงสวยงาม View detail
It's a product that I'm satisfied with the riding position.
It's a satisfactory product among the rear sets. Exchange from genuine product to corresponding product and improve nigrip to maintain stable posture for riding. It also has a dress-up effect, so it's good to look at. If you are thinking about the rear set, I highly recommend it. View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 Pro
Light! Parenthesis is good!
The WheelSingle Body is extremely lightweight! That's all I can say.
The design is very good, and the custom feel is much improved and parenthesis becomes better.
I dared to choose TitaniumSilver anodized as it is also available in OEMStandard Spec. in Black and Gold, and it was the right choice.
View detail
ใส่ได้อย่างพอดีสวยงามมาก View detail
สินค้าตรงปก จัดส่งรวดเร็ว View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
สินค้าคุณภาพ จัดส่งและการแพคสินค้าดีมาก View detail
Rear Sets
I was worried about the high price, but I chose JAPAN to eliminate the anxiety about my feet.
Quantity for installation:Pair (for Left and Right) I thought about using a screw lock, but decided not to for now.
Photo shows Quantity with OEM:Pair (for Left and Right) Here's a comparison. 40mmBack.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
Overlaying sliders are the best
I bought it at a good price during the overlaying sale period.
Since the subframe was installed first, there is no major problem with installation.
Remove the existing spacer and install the slider and enclosed spacer in its place. Since the frame and sliders vary depending on the model year, check the model year before purchasing.
The beautiful color of silver and the sturdy structure and details are also overlaying. -------------------------------------------------- -------- I bought it at a good price for the overlacing sale period. Since the subframe was installed first, there is no problem with the installation. You can remove the spacer and install the spacer with a slider on the spot. The frame and slider vary depending on the year, so check the year when you buy and buy. The beautiful color of silver and the strong structure and details are also over-racing. Powered by Google Translator
View detail
As expected, Over!
Best
It would be better if the Gold amount was lower!
View detail
Highest Quality Material Exhaust for the Monkey 125
About quality and texture: I am happy with the quality of the titanium up exhaust from Over Racing. The muffler is quite compact with a non removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium up exhaust is an aggressive looking exhaust on the Monkey 125 but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium up exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove and then the positioning of the exhaust to ensure it did not contact the aftermarket clutch cover was problematic but you will not encounter this with the OEM Honda clutch cover. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you are intending on using this titanium up exhaust with the SP Takegawa clutch cover you should be aware that it will fit but with only very little clearance and you cannot using the breather cap from the SP Takegawa catch can kit on the oil fill hole without difficultly. View detail
Z125 Pro, for Rear Sets PENSKE BR125H
Rear Sets PENSKE BR125H are installed on a Kawasaki Z125 Pro.
Because the body color is black, the white color of the cap originally attached to Penske's Footpeg Bar End stands out. (My preference.) I was looking for something in Black that I could use and found this OVER cap and bought it.
exchange procedure
Remove the footpeg, insert the driver through the hole at the base of the footpeg, and tap it with a mallet to remove the cap. (It is quite hard.) 。
Place the footpeg on a flat surface, hammer in the Cap to be replaced, and you are done. We recommend tapping weakly until vertical positioning.
I replaced it and the Size was perfect (insert diameter:Diameter 16mm, Outer diameter of Cap.:25mm).
It took me quite a while to find this Cap, but it was worth the search.
I have used it for a year after replacing it with this Cap and have had no problems such as disconnection.
I am satisfied because I found out that it can be used as Repair Parts !!!!
View detail
I knew it!
I am posting this because it was good six months after the exchange.
The replacement took a long time, as others have said. Half day work
The parts that arrived at my place were all replaced with high precision without any modification.
Again, the Point was helpful, but still expensive, so I gave it an overall of 4.
The hardest part was inserting the Pivot.
The quality was fine.
However, since it is Black, fading of the footpeg is inevitable, but this is also a taste.
Before the replacement, the outside of my foot would rub against the ground on rare occasions, but I don't have to worry about that anymore.
The position has become just right, but now I want to make the handlebar a little lower.
I also feel like I naturally have a knee gripAnd ankle grip.
However, as the previous poster said, vibration is easily transmitted.
I thought it was acceptable for me.
One disappointment is that the LINK on the chedge is slanted, so I feel it would have been better if it were straight.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
Color faded.
We wanted parts that could support the change shaft and increase precision, and we also wanted to improve the slightly awkward sprocket cover's parenthesis.
Design preferences are subjective, but I think this is the coolest Sprocket cover.
The assembly is a bit puzzle-based, and if you are not confident in your dexterity, it would be less frustrating if you prepare someone's third hand to work on it.
The Change Shaft Holder has a BearingMETAL, but the accuracy is not that great, so it is safer to think of it as a bonus.
The hidden wiring will be exposed, but as it is, it will look sloppy, so wrapping 6Φ Spiral Tube around it will actually protect the wiring and give it a bit of a Spartan look.
I have actually been using this product for 3 years now. I wiped it with Dustcloth sprayed with Parts cleaner to remove dirt and the color came off. (The color has been removed. (That is why the area around the landmark looks silverish.)
I had no choice but to Masking the bu Landmark's place and painted it with dyed Q.
You may want to wipe the dirt with neutral detergent etc. instead of Parts cleaner.
I personally gave it 4 stars for quality cosmetics because of the color fade and the accuracy of the Change Accent, but basically it is a good product with an overall rating of 5.
View detail
That's what I'm talking about. Over??
For some reason, the Instruction Manual was included for ZEPHYR, but ….
The quintessential Over production is impressive. ??
View detail
insurance against fire from standing fire
Bracket is Material:It is made of aluminum and is lightweight. The bolt on the engine hanger is difficult to remove, but once removed, it is easy. 22mm Spanner and a MONKEY Wrench are required. View detail
Fits: KAWASAKI D-TRACKER125, KAWASAKI KLX125
Even the Fender Eliminator was Large sturdy.
I was worried about interference with the Fender Eliminator Kit, but I was able to attach it safely.
There is no sense of limit, so it can be installed with any Fender Eliminator Kit.
High Quality and Satisfaction.
View detail