Reviews
When in doubt, Emon
If you're not sure about buying this kind of thing, choose Emon Industries.
Mostly everything you need is here.
There is also a certain amount of Quantity:It's a set, so it's hard to buy additional items after you've purchased it.
If you're a PRO, it might not be as cosy, but if you're an amateur, it's fine.
It's also easy to stock as is, since it's mostly in Case.
If you need help with connectors, you can find all the parts you need at Emon Industries.
View detail
It is easy to change clutch switch.
I used it when I installed NisshinClutch master on my NINJA.
Kawasaki has a 3-pole clutch switch, while most common clutch switches such as Nisshin have a 2-pole design.
Using these Parts, I was able to easily install Nisshin's Clutch master on my NINJA.
The only complaint I have is the price.
But if you make your own, you'll need hundreds of dollars for parts and labor costs and so on.
Doesn't sound so expensive...
If you use this product, you need to turn off the Clutch when you start the Engine.
Cell does not turn. If you get used to it, there is no problem.
View detail
Fits: その他 For 4-5 inch Bates type headlights
it's simple
It was used to make Number Plate for WR250X.
It's easy to plug in, but if you can make your own, it's cheaper.
The mounting part was wobbly and there were gaps in it, so I made a GRUGRU with Vinyte, including waterproofing.
Earth (?) The branch of Emon was also female, so I made a Male-Male.
It was my mistake that I didn't check it, but it became MEND Habit… when I installed it.
View detail
Handy!
I think Bullet Terminal is often used for wiring work.
However, when you want to put them together, Bullet Terminal can be quite uneven.
When you want to put together wiring such as Blinker, this kind of coupler can be used to put together nicely, and it can be removed with one-touch, so I think it is the high road parts of wiring processing.
There are many different types available, so you can buy the one that best suits your needs.
View detail
It is convenient without any processing.
I bought the Clutch master of ZrX1200 DAEGFile to attach the radial piston of Nisshin. You don't need to hold the clutch lever to start the engine. View detail
It can be used in the Z900 20-year MODEL.
Because the license lamp has been changed to LED from the 2020 MODEL, the Connector of the license lamp attached to the Fender Eliminator Kit that is compatible up to the 19 year model cannot be installed.
I got information that it is the same as the Connector of the license lamp of Z900RS from the wisdom of the predecessors and bought this one.
It is possible to install an external license lamp without modifying the body side Harness.
It's just a Connector, but it's a bit expensive.
View detail
It was bigger than I thought it would be.
Not as Blinker's Connector, but as Quantity:I bought it as a coupler that can hold 2pc of wire in place at once.
Size is larger than the size you see in the picture, and it was not good for the application I was imagining.
The quality itself is perfectly fine, so if you want to use it to replace Blinker, etc., you can use it safely.
View detail
Frustration is relieved.
Very handy for pulling the Wiring out of the Coupler. If it's not thin and strong enough, it bends and breaks quickly and is frustratingly difficult to pull out, but this is an easy to use and convenient tool. View detail
Mount it on MONKEY!
Replaced with WSocket from Single socket. BlinkerBodyManufacturerUnknown, but this is a little bit around the perimeter of the Socket. It was cut and installed. Since the attached Grounding Wire was unnecessary, it was cut. View detail
Fits: その他 For 4-5 inch Bates type headlights
It's a simple connection and a Recommendation!
Used when WR250X is Number PlateSpec. and made into 2 PIAA fog lights. I didn't want to process the 6V MONKEY/GORILLA Main Harness side. I chose this product because it's a great product.
There are other manufacturer's products, but DAYTONA has a sense of trust and security, so I chose.
It's easy to use. If there's a product like this itchy product available, it's cleaner and faster to use than to make your own. So it is Recommendation.
View detail
Fits: その他 For 4-5 inch Bates type headlights
Easily installed with external headlight kit without cumbersome wiring process
The LED Headlight Kit is the OEM H4 Easy power delivery from the Coupler means that the OEM's Harness can be powered easily without modification and without It is possible to install the electrical components without having to do that stingy, abominable wiring process
If you're sloppy but want to put it on nicely, Money is the solution
The coupler of H11 is the same shape as the H4Coupler, I think, and there is only one Plus line I think it was so different that it wasn't, so I think it can be diverted
View detail
I didn't want to disconnect NORMALWiring, so I bought it
I bought it along with the Clutch master Radialization of ZrX1200R
I bought it because I didn't want to cut off the NORMALWiring, the Kawasaki 3p's Connector to 2P, and in the others' Impressions I was told that the Cell Motor would not turn unless I held the Clutch lever, but my You don't have to hold the Clutch lever to start the engine on a Motorcycle Why is that? I'm not familiar with electricity, so I don't know why, but it's convenient, so that's good
I think it's an expensive purchase for simple Parts
View detail
Fits: HONDA MONKEY
Refreshed
The home-made Indicator Lamp was wiring with Bullet Terminal But when removing and removing the meter surround when you lose it, it is troublesome and Wiring is It's a mess, so I introduced it when I was organizing Wiring around Front Thanks to your help, it was Refreshing View detail
Available from 1pc
I'm satisfied with Large because I can buy only the parts I need for the parts I rarely use
The terminal and the coupler were not softer than OEM parts because they were new It's also securely installed
It was more than enough
View detail
Wiring interrupt
OEM Harness doesn't want to hurt, but due to a rather niche demand for interruptions Purchased in
There are no problems with the shape and the OEMConnector connections are solid
The terminals are well made
It is very helpful to have these terminals readily available
View detail
Good tool
This is made in Taiwan. Although the color is not gold, I think the quality is better than the Thailand one since I bough the Thailand one before. It is useful to repair / change the wire. I like it. View detail
Different from the image
I purchased the product based on the product image, but it comes with a different item than the image I checked my email and found out it is a 2-pole coupler The picture is 3-pole but there is a description "2-pole" at the bottom of the page 。 incomprehensible 。 image fraud 。 You shouldn't put another picture on it If you don't have a picture, you should sell it without one If you know the part number, you can look up the product 。 If you're going to put a description, you should put the product name and part number on the top page But not a picture 。 regrettable 。 View detail
Fits: HONDA MONKEY
no problem
It is the same shape as the Connector of the Regulated Rectifier for moped of Honda cars So it is useful when you play with the electrical system
Used to replace the Regulator in pure AC vehicles with a Regulated Rectifier I did
The lock is stiff and difficult to pull out, but on the other hand, it's secure and secure
View detail
For OEM Switch processing
Headlight, Horn, Blinker's Switch was this I want to use Passing, so I'm going to rebuild Wiring for Switch here View detail
Clutch switch as Can Sera
I was wondering if the 3PCoupler can be used with the Clutch switch for other models if it is a 110-inch model I think The only drawback is that I wish there was Black It looks like it's going to stand out unless I wrap it around with BlackVinyl Tape. 1 you can buy it from pc. so I bought it on an errand while I was at it for free shipping View detail