Reviews
Fits: YAMAHA TW200, YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
If you replace the Handlebar, the Quantity:Set
I bought this because I need to extend the length of the Clutch Wire when I convert to Trucker handle.
I chose HURRICANE's one to match my Handlebar.
good point
Exclusive design makes it easy to install.
The Handlebar and Brake Wire are made by the same manufacturer, so there is no need for fine tuning.
The texture and durability are high. It is indeed a HURRICANE product.
Clutch operation is also not particularly affected.
A bad point
It's a little expensive.
I used the same manufacturer for the Handlebar, Clutch Wire, and Brake Wire so it was easy to install.
This would have caused a slight tweak to the RoseRose, and I think it would have gone up higher the other way.
This is a long-established company that has been manufacturing Handlebar and its surrounding Parts for a long time. This Manufacturer is a RECOMMENDATION!
View detail
I think it's smoother.
I used to use the OEM Product, but after replacing it, the pull seems a little smoother and easier.
I was suffering from continuous clutching during traffic jams, but it may be my imagination that I don't care anymore...
View detail
With the Handlebar replacement
I bought it because I changed the Handlebar to a tapered one, and the height of the clamp increased and the width widened, so the cable became flat.
I am very happy with this product because I can extend the cable as much as the height is increased.
View detail
Fits: HARLEY-DAVIDSON Big twin, HARLEY-DAVIDSON XL SPORTSTER
It's a rare commodity.
Oil leak through Clutch Wire.
I wasn't sure what to do with it, but there it is!
View detail
Ideal for carrying
There was a person who was touring before and the wire broke, and there was a person who returned on the way with no clutch.
I was on my way home from work when my clutch wire broke and I had to go home with no clutch.
So, I decided to carry Inner wireKit for emergency use.
Recently, there are a lot of kinds in the shop, and I decided to carry it in the direction that I protect myself with Spare because it seems to be the direction to reduce the stock.
View detail
To YamahaRENAISSA
I bought it because I cut the Clutch Wire because the Wire cable was hitting the CamTensioner due to my poor maintenance. It is an external wire but I use it safely. I have not had any problems with it. View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Quality is not good
I had the replacement done at a specialty Shop and the Lever side Ring shattered upon adjustment! I'm glad I didn't start running it. I guess they didn't inspect it or anything. The return and exchange was also no good. It is better not to use the original without knowing the identity. View detail
Used with SP Mukawa's Special clutch
Body is CHALY and Engine is MONKEY.
Special clutch by Mukawa Clutch (henceforth Specula) The Clutch Cable Holder attached to the Clutch cover of Speckla buffered the Body of CHALY, so I had to cut the Holder of the Clutch cover.
Then, how to hold the Clutch Cable? But it is this product that solves the trouble.
I used CHALY OEMBody holes to install it.
I don't think there is much demand for it, but it was very helpful that it was there.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW225
Used during BRONCO's VMX-style Custom
[Usage]
Used to replace the Handlebar on the BRONCO with a higher and wider one than the NORMAL
【Motivation or reason for choosing or purchasing
I wanted to customise my BRONCO to look like a VMX, so I replaced it with a wider Apu Handlebar with Bridge.
The Axel side had enough Limit length, but the Clutch Side was not enough length about 10cm more. Then, when I looked for something good Clutch Cable, I found the one for BRONCO which is released from the company.
However, because this was too long in the case of my custom, I bought this one because there was a setting of 150mm long for SEROW225 which had the same engine and the same length of cable.
For installation
The installation was not particularly difficult and the replacement was easy because the shape of the Thailandco is the same.
However, because it became a little extra long than the necessary length, the tube part hit the exhaust pipe and melted a little if I did not devise the handling.
I had to use a Tie Band or something to thread the side closest to the Frame.
[Fit & Feel]
Even if it becomes longer, the operation feeling is good as same as NORMAL.
View detail
He was very active in waking up the vehicles.
[How is it used?
When I disassembled the VTR250 and reassembled it again, I found that the cable that was attached to it was broken, so I decided to change the whole set.
Was the one you received as per Image?
It's an OEM look with no Custom feel, for better or worse.
Now I think that I should buy OEM, but there is no problem with the length. Well, I can write Impression and get Point.
Was the installation difficult?
No problem with installation. The length is also no problem.
Grease up around Thailandco and finish.
I know it's better to lubricate the inside with wire injector or something, but doesn't it leak when you put it in?
How was your experience with it?
There's no special Touch feeling.
It's normal-of-normal.
Now I just have to see how many years I can keep it … I'm sure I'll get tired of it before then.
[Included Parts:were they on?
Nothing special.
[Was there anything that disappointed you?
Nothing special.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I bought Throttle, Brake hose, and Speedometer Cable together to change a set of Cable. When I change it in one change, the appearance changes at a dash, and it is good.
View detail
Long clutch cable
As for the GSX750s, it seems to be a little lighter than the STD Shape because it has a wider range of handling changes.
However, STD Shape's product has a tube that suppresses the movement of Wire near Lever, but this product doesn't have it, so you may feel the movement of Wire when you move Handlebar, and it may not be bothered by the pull of Lever. The difference of the feeling was heard.
View detail
Fits: SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT), SUZUKI Bandit250 (BANDIT)
it's the best
I had no choice but to buy it on Yahoo because of an emergency, and replaced it because the Made in TaiwanClutch Wire that I was using was broken.
The first thing that surprised me was that it was twice as thick.
And yet FeeRing is the best.
Since I use my motorcycle for commuting, it is urgent that the Clutch Wire breaks.
I would like to have this product always in stock by Webig.
View detail
Great
It's not an OEM Product, but it works fine. View detail
Fits: HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY)
A little short?
I used it to service a 30 year old GORILLA. 。 It can be installed itself, but the overall length of the wire is about 20mm shorter than the NORMAL wire, which makes it a little difficult to handle. (Functionally, it's not a problem, but I think it would have been even better if it was made the same size as the NORMAL wire. View detail
Honda's parts are being discontinued too soon.
Used for XELVIS.
It's long because I have a Handlebar up about 3cm and there was not enough room in the Clutch.
It is possible to use VT-based engines, but please note that the wire length is different for each.
That said, Honda has a very unreliable supply of parts, and given that the 90's vehicles are nearly wiped out now, I'm very happy with these Aftermarket parts.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R, KAWASAKI Z250 (2013-)
It's actually compatible with the D Tracker 125
"I bought this when I upgraded my Handlebar because the Handlebar on the D Tracker 125 was low. I did some research and it seems that I can divert the NINJA2 Helmet 50R's. So I bought it. I measured the length of the wire with scissors.
Other products used include https://www.webike.net/sd/9694917/です. "
View detail
It is a good item
The price was low, but the quality & amp; durability is fine. It's been over a year since I installed it and I'm happy with a good product with no problems. View detail
I will write well.
Best of all, if you buy the right length. It's cost-effective and great.. But it's a big trap for me to do it wrong. According to the handle height or size, measure the length carefully and check the color carefully before purchasing. I am very satisfied. Thank you.~~ Best of all, if you buy just the right length. The cost performance is good and it's awesome... But I made it wrong is a big trap. Measure the length according to the handle height or size and check the color carefully before purchasing. I am very satisfied. Thank you. translated by Google Translator View detail
I'll use it well.
I don't really leave any reviews about the cable, but it's a good value for money cable. If you buy it according to the length, it will be better than any expensive cable. It's also good for reviving the old-fashioned poster feel. I want to get it replaced soon. Well done thank you Haha The cable is not particularly late, but it is a cost-effective cable. If you buy well, it will be better than any expensive cables. It's also good for reviving the old-fashioned sposter feel. I want to change it and get on. Thank you. hehe translated by Google Translator View detail
Quality!
I installed the ZETAHand guard and changed the Clutch Wire from Limit to a 5cm longer one, and I'm happy with the result that I can afford it! View detail