Reviews
It will be a nice revival.
Aluminum part will be scratched, so a new replacement will bring it back to good shape.
When installing, it is recommended to apply a small amount of silicon grease before installation.
Shield's movement is Smooth.
View detail
As expected of an OEM Product, it fits perfectly!
I bought this with spare parts for the Helmet I purchased.
I haven't replaced it yet, but from what I've seen, it's an OEM Product.
It is the perfect Size.
View detail
Could be used on forest roads in the summer.
I have not used them on a motocross course or in any other high speed environment, so I don't know how durable they are. I have not used them on a motocross course or other high speed courses, so I don't know how durable they are, but they are sufficient for playing on forest roads, and the price is not too expensive, so I could easily buy them. View detail
Easy to use even after model change
It is easy to take off and put on, and I used it for the previous MODEL. View detail
cheap and quick
It arrived about 4 days after ordering. The price was also the lowest I could find. The installation was done by a contractor who filled in the uneven areas with Pate and then Allpen. View detail
![Ventilation Liner for Helmet [Skull and Bones]](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-02-01_TS.jpg)
I think that it is quite good.
This is the second time I have purchased this product.
The last one I bought was also used for 5 years, but I had no problem with it, and I changed my mind with a new Helmet.
I think the durability of the product is fine, and the stinging at the beginning of wearing is a good thing if you think of it as a blood circulation booster (laugh).
View detail
Since it is a resin
Resin Screw, damaged by falling helmet. It is to be replaced. View detail
Difficult to detach and obtain
The base is held in place by a magic tape, but it is so far back that it is difficult to remove and must be pulled to the point of tearing.
As is the case with all HelmetParts these days, it was hard to get them in stock and I had to wait more than 6 months for them;
View detail
I'd say it takes about a half hour of use to cause distress (pain).
Pain occurs after about 30 minutes of use.
My hair is disheveled, but I can't bear the pain.
I've tried to wear it in my own way, but I'm limited to wearing it for 30 minutes.
I think it is good if it is a loose Helmet, but a Helmet that fits
30 minutes seems to be the limit.
Please consider your purchase carefully.
View detail
One-touch with this
I replaced the chinstrap on my helmet with a one-touch. The other day I went on a long touring trip and noticed that I was not wearing a chinstrap and managed to tie it through the ring with my left hand, but I was reminded that it was dangerous to use a large clip while riding and I remembered that KIJIMA has a one-touch clip and ordered one. I thought about it, and this was the third time I had ordered one. When I looked at the delivered product, I saw that it was exactly the same as before. The installation is easy for anyone. As for the quality, I think it would be easier to install if the claw that locks the clip by pushing it in was longer and could be adjusted in about three steps. View detail
Unfortunately, it works, but it's not painless.
At first, it was good, but after about 30 minutes, my head began to hurt and I realized that I could not use it for a very long time, which was disappointing.
I shifted the position of the device to see if it would improve somewhat, but after some time, it became very painful.
View detail
Higher grade feeling
It is a privilege for Large people.
Make a difference from the others.
View detail
The string is easy to pull out.
I am afraid to attach the strings later by Sliding them without sewing them, but they can fall out.
A soft type of string may slip through the gap and lead to an unexpected accident.
I ended up sewing it up and using it so that there was no Gap.
View detail
![Ventilation Liner for Helmet [Checkered]](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-05-01_TS.jpg)
Select Helmet
The haircut is not flattened, but the protrusions feel painful after prolonged use with Two-Ling. View detail
![Ventilation Liner for Helmet [Frames]](https://img.webike-cdn.net/catalogue/images/2697/ho-air_hd-no-04-01_TS.jpg)
Inner Cap and Quantity:Set!
Used on SHOEI JO L Size. As others have said, the warts sting my shaved head and it hurts! But it makes it cooler.
In Touring, Inner Cap and Quantity:When used in the Set, it is cool, absorbs sweat, and does not hurt over long distances.
It is easy to install and remove, so I remove the Inner Cap for CHOINORI on my commute to work or in the neighborhood because it is a hassle to put it on.
View detail
Recommended for street riding OffHelp GlassesRider
[How is it used?
I bought it because I am a GlassesRider and I have to take my helmet on and off a lot for short distances.
Was the one you received as per Image?
No problem at all
How was your experience with it?
Quite useful for GlassesOff Hell Rider.
For those who have not put on Glasses.
Recommended if you do not like the Belt of the Goggles covering the Design of the HelmetRear.
[Points to note]
Some manufacturers of Goggles use an integrated type of Goggles with no interchangeable Belt.
I have a lot of problems with Belt widths, etc.
You can be sure to do an actual Goggles match after purchasing this item.
I was a little concerned that the explanation on the back of the package was in English version and the illustration was difficult to understand.
View detail
A necessity for eyeglass users
Goggles to Quantity:I used to have trouble adjusting the position of the glasses when setting, but after using this, I can easily adjust the position, so I recommend Large Change. View detail
![Ventilation Liner For Helmet [Orange].](https://global.webike-cdn.net/photo/impression/0e/0ec3e6a68a9de2cf468ae40e564a8b03L.jpg)
For city driving and a little bit of riding, Recommendation!
Helmet is always necessary when riding a motorcycle.
The hair can be crushed when wearing it for a long time.
Then there's a product that claims it won't crush or steam your hair!
A summary of many of the impres↓ sions goes something like this.
Merit:No hair crush, no steaming, It is easy to install.
Demerit, unevenness hurts (leaves marks), poor cosmetics.
The price of the regular product is 3,500 to 4,000 yen per piece, which makes me hesitate to buy it.
I searched around and found a product that seemed to be OME, so I gave it a try.
In case you are wondering, two for 2,500 yen.
In conclusion, all your impressions are correct.
My impression of the product is that it is just right for city driving and commuting.
Installation:Easy (position is your choice)
Feel:Less steamy (better than not wearing it), hair gets crushed after wearing it for a long time (about 6 hours).
Pain:It doesn't bother me for about 30 minutes to an hour. After that, the weight of the helmet starts to bite into it. 6 hours of wearing it, I had to lift the helmet every time I got a signal.
COSPA:I would buy hats if they cost 3,500 yen each.
View detail
subtle
[How is it used?
Used in Touring.
Was the one you received as per Image?
I had seen it in a supply store and it was on Image.
Was the installation difficult?
No problems
How was your experience with it?
The ventilation feels better and my hair is no longer flat.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The Helmet's Size feel has changed because the top of the head is now tighter.
I wish they would make it a little thinner.
I've heard that it doesn't make my hair flat, so I'm happy about that, but I think the price is high.
View detail
Hair is not flattened.
I don't see any improvement in air permeability, but my hair is not flattened. View detail