Reviews
Fits: YAMAHA YZF-R125, YAMAHA YZF-R125, YAMAHA YZF-R125, YAMAHA YZF-R125
Simple and SMART Fender Eliminator Kit
I liked the Simple shape and purchased it.
Although it is a 125, it is a member of SUPER SPORTS750, and when replaced, it will tighten up with Race ish.
[How is it used?
I use it on Touring Main, but I don't ride in the rain, so mud splatter is not a consideration.
Was the one you received as per Image?
Yes, it was approximately as per Image.
I love the perfect positioning of the RearSide cowl and the Fender.
The license plate mounting area, number light, reflector, and blinker are positioned in good balance (as expected from Exclusive Design).
Both License Plate and OEMBlinker were installed without any modification.
The mounting points (three screws) of OEM parts are used as they are, so the stability is outstanding.
○ Quantity:Simple and lightweight (approx. 150g) as it is molded from 1pc. aluminum plate
I think the LED number light is cool (about 6,000K?).
Almost everything needed for installation (except for the wiring of the number light and the bracket of the reflector).
BlackEtchingSeal was not included in the Instruction Manual (not because we forgot to include it, but because the Manufacturer decided it was unnecessary?)
The Instruction Manual has 30 pictures of the car body, which helped me understand how to remove and install the car.
Instruction Manual in 3 languages was included, but there was no translation (please type here (as described in Webig)).
In the case of 125cc, the license plate is small, so it is inconspicuous and SMART. (Leave the color aside.)
How was your experience with it?
It has been less than 2 years and about 3,000 km since I installed it.
No damage.
No peeling of paint.
○ No malfunctioning number lights
Quantity:Made from 1pc. aluminum plate, no screws or Rivet will come loose or come off.
So, you can use it for a long time with peace of mind.
[Points to note]
The following is a description of what I noticed about installation and removal.
○ The number light shade and number light are not glued together, so one day they will suddenly split (be careful not to lose them).
Wiring for the number light needs to be modified to Bullet Type Terminaletc. in order to connect the wiring.
○○An ingenuity is needed to attach a Reflector (Bracket and others were added) …2
When removing the Seat Cowl, it is necessary to loosen the screws that hold the Fender Eliminator Kit in place in order to remove the lower push rivet.
How did it compare to other products?
It will be much lighter than the OEM Fender.
And above all, WeBig's conscientious prices are excellent.
I compared it to eBay's Shop before purchasing, but WeBig's price was unbeatable.
I like the Fender Eliminator Kit very much, because it makes the Rear area, including the wiring, look cleaner.
If you don't ride in the rain, I recommend it.
View detail
Fits: SUZUKI GSF1250 Bandit, SUZUKI GSX1250FA, SUZUKI GSF650 Bandit, SUZUKI GSX650F
It is an overseas brand, but it fits like an OEM product
When I used NORMAL, I felt like the area around my rear was a little blurry, so I decided to use Fender I was looking for a Eliminator and I found this product and installed it I'm very happy with the way it looks View detail
Fits: SUZUKI GSF1250 Bandit, SUZUKI GSX1250FA, SUZUKI GSF650 Bandit, SUZUKI GSX650F
Made overseas - - - So hey ~
Fender Eliminator for BANDIT
There is only one in FOR JAPAN MODEL Manufacturer
Examining, Manufacturer here is Hit.
Because I am not around, I will try to attach it to the test
I decided to purchase.
Reached the other day, noticing a strange thing just after starting installation
Instruction Manual for 1199 panning - - It was in.
Because it is made from overseas, collectively, take the meaning of watching it
Start work.
Box, making Fender itself perfect.
Removal of OEM and no problem at all.
Position of the hole drunk.
However.
Apart from Fender and License Plate Bracket
Everything for panignale was included.
Of course, Bolt classes required for installation.
I managed to install it with Bolt and Bracket on hand
If it was not, it was supposed to be strange.
It was already after Fender was installed
I could not return it, but I gave it up
I regret to say that things are good.
If possible we can make sure that we will check Big before shipping
Thank you.
View detail
Fits: YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZ6, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER, YAMAHA FZS600FAZER
R&G Fender Eliminator Kit/License plate holder
【What made you decide the purchase?】
Because it felt that the installation was an easy product
【How was it actually used?】
I was able to install it without problems for work.
[Is there anything I was disappointed about?]
Is it a price if you dare say.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I wanted a low price.
【Have you compared items?】
I did not have much LineUp in terms of vehicle, so I bought it immediately.
View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R
Appearance clear!
Buy to Fender Eliminator
The appearance is refreshing
The making of details is sweet
I asked for installation at Red Baron, but it seems that Screw was short and a bit painful
View detail
Since the crevice between a number LGT and a muffler was worrisome, the fender less kit was stuck. I think that attachment can be simply done if attachment follows the procedure which removed normal. However, since the mounting hole of the bolt of
Since the crevice between a number LGT and a muffler was worrisome, the fender less kit was stuck.
I think that attachment can be simply done if attachment follows the procedure which removed normal.
However, since the mounting hole of the bolt of a number LGT was small, it extended with the file.
Moreover, the thing of R&G is only a hole although it is attachment of a blinker, and normal has welded the nut.
The nut of M6 was independently required.
In addition, although it was with number LGT attachment, the number of reflectors with round having actually attached was one.
Although normal is quite heavy in whether it is made of iron, since the thing of R&G is aluminum, it is markedly light.
Although there was also an insufficient portion, since the crevice which was able to stick satisfactorily and was worried had also been improved, it was good.
View detail