Reviews
Fits: KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2
I knew it Marshall.
Marshall and Cat Mark are the best.
Mounting ponting.
View detail
Fits: KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX400II, KAWASAKI ZEPHYR750
Replacement was easy.
OEM has been cracking due to deterioration.
Purchased for replacement.
I am satisfied with the quality and texture.
Also, all necessary connectors are included in the package.
Replacement is easy
View detail
Pimping to 12V square eye CHALY.
Fit is perfect.
Small is not wired.
The fact that it is made of glass is also an added bonus.
Chinese LEDs are installed on these to ensure brightness.
We had a good shopping experience.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB400SF SPECIII
Good product as long as the connector fits
There are several similar LED Tail Lamps sold by HONDA, AP something, Posh, DOREMI, and others.
I looked at many installation articles and youtube, and Posh was the best choice for me, but it was also the most expensive. Of course, I don't know if they are made in Japan or not, but I was thinking of going with DOREMI because Posh and DOREMI at the top seemed somewhat trustworthy, but then I saw them on Yahoo Auctions at a price that looked like they were made in China, so I bought them. (It was DOREMI no matter how you look at it from the picture and the color of the cord)
It said something like "Connector needs to be replaced depending on the year …" but I thought I could probably pimp it out, but unfortunately, my 2011 CB400SB (NC42-130) had the wrong Connector and I immediately went to AMAZON and I ordered DAYTONAHMWaterproof Connector. (Webike is cheaper, but I needed a Large connector as soon as possible.)
I thought I had done a lot of research to make sure I connected the right way, but when I finally finished and tried it out, I found that the connection was not correct. Stop-lamp won't work!!!!"
Honda Motorcycle is Yellow/Green, Green, White/Green, DOREMI is Red, Yellow, Black... I went back to the Net and checked Q&A. The more I looked, the more exceptional answers came up, and I was at my wit's end. So I called the DOREMI head office and asked them to look into it. (They were very polite!). In the end, the answer was Red is for when you step on the Brake, Yellow is for the Tail lamp that is always on, and Black is for Earth. It is certainly the most imaginative shade. It is certainly the easiest shade to imagine. Then the complication is Honda, but I was able to work that out through research.
I took it apart again and looked at it carefully, and found that the black color of Earth was correct, but the red and yellow colors were reversed.
Thanks to the person who answered the phone at DOREMI headquarters, the Stop-lamp now lights up properly. （Thank you very much for your help on the phone at the DOREMI head office.:(I think it would be great if it was a Set)
I know it's a bit presumptuous of me to post my impressions of the DOREMILED Tail Lamp without having bought it from Webike, but I thought it might be troublesome if someone new to MotorcycleMachine, like me, decides to replace it with this product on his/her own. I thought I'd post my impressions.
The product itself is very nice, with the Cushion Tape attached from the beginning and the same size as the original OEM product. So, I have no complaints about the product itself, but the Connector that can convert from 3Pin connector to HMWaterproof Connector is not available in quantity.:I think it would be perfect if it were a Set.
Blinker about a month ago. [Color] I replaced it with Clear and now the Tail lamp. [Color] Since I decided on Clear, I think the color unifies the WhiteSilver CB400SB and makes it look awesome and fearless. I am very satisfied with the result.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
After all, Light is Marshall.
This is Marshall from Mark the Cat.
Replacement was fairly easy.
It is Psycho for the appearance Custom.
View detail
Fits: SUZUKI GSX400, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI GSX1400
It is still this Blinker.
I put it on my CB1000SF and it fits perfectly. View detail
PCX125JK05
Front suspension of PCX125JK05 is Quantity:Pair (for Left and Right) The size or rather the shape is different in
So Quantity:Pair (for Left and Right) I don't remember which one, but it doesn't go on straight away, so a lot of ingenuity is required.
It was scratched or the paint peeled off.
Rubber sheets for protection, such as double-sided tape, should also be prepared.
I have no problem with the sturdiness of the product or anything like that.
It would be nice if there was a dedicated Bracket, but there is not.
I wonder if it will be attached if Type is made into 44 pie.
View detail
It started blinking at 4 months.
I like the brightness and color of the Position itself.
I am sorry to say that it was not too durable.
View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Repair lens
Motorcycle was knocked over by the earthquake shaking, and the items that had been attached to it were damaged.
I am very thankful to have only Lens because I can use bulbs, Socket, Wiringetc.!
View detail
A good value at this price.
I bought it for the xs650 bobber project. I liked the retro style. The bobber style makes my bike look great. It works fine, no problems. I used a different bracket that I thought fit better. Be sure to look closely at the image to determine if the included support will work for you. The shell is chrome plated metal.The chrome plating is really high quality, easy installation,I know what all of the wires do because I have a wiring schematic and the plugs are identical in configuration to accept the H4 bulb. I thought about replacing it with an LED bulb, but it doesn't quite fit the bobber philosophy. It's not like cheap Chinese goods, it's really high quality, I definitely recommend it. View detail
Replaced due to bulb failure.
Replaced due to bulb failure, Quantity:1 Set of 2pcs.:Pair (for Left and Right) We replaced them at the same time, and the one that has not been cut is kept in the body as a spare. Since they are consumable parts, well, they are not particularly good or bad. View detail
Replaced due to deterioration
I replaced the Blinker I bought about 30 years ago when the bulb went out, and I also replaced this one while I was replacing the Valve. I will be over 80 years old when I replace them next time. View detail
Quite a back view Refreshing
I installed this on my Ninja 400 2018. I really didn't like the back view and wanted to make it Refreshing.
It was made to look quite Refreshing and the visibility of the Blinker was fine. The Installation Instruction Manual was easy to understand.
I had a fair amount of trouble installing it. However, there is quite a lot of information about it on blogs, so I don't think I made a mistake.
First, the screws on the Blinker Bracket were too tight when removing the OEM.
I know it's a Kawasaki thing, but before you start lambasting Screw, here's the Shop. (Note that it was equally hard on ZrX1200DAEG, so be careful if you have common or similar Parts)
If you want to use Bullet Terminal for the connection after installation, you don't have to do any modification. In my case, the OEM was the connector, so I cut off the Bullet Terminal and installed a separately sold connector with Electric Works Pliers.
View detail
I think it's bright.
I can't compare with OEM headlight because I don't drive at night and I changed to this LED immediately after I got the car. I don't know if it will pass the inspection or not now. As for the installation, I could not install the Waterproof Cover on my motorcycle because the overall length is longer than the OEMValve. View detail
MONKEYTachometer out-of-lighting measures
The lighting bulb of Takex Tachometer, which was installed in MONKEY, went out, so we installed KIJIMA's lighting bulb as a Universal Product, and it worked fine.
We will fit the product with confidence, so please use it as a reference!
View detail
![Universal Blinker Relay [MISUBA]](https://img.webike-cdn.net/catalogue/images/31959/12032220_529dda8e89377_TS.jpg)
Fits: その他 , HONDA LEAD, HONDA DIO system, HONDA TACT, HONDA Giorno
Compact
It is about 1/3 the size of the OEM Product and is perfect for fitting in a light case. View detail
Fits: Others
Installed on a MONKEY125!
Installed on a MONKEY125!
Refreshing night visibility improvement and Rear area! ^_^
Since we had a hard time with our own Bracket and Wiring for installation, we recommend that you ask someone who is familiar with Custom to help you.
View detail