Reviews
Unobtrusive Parts but does a good job
This one was selected because it had a Crack along the Mounting Bolt on the License Plate due to vibration.
There are various shapes of number brackets, but this one is shaped to perfectly enclose the license plate and has claws to stop it from slipping, so even a somewhat deformed number will be held firmly in place.
It is also nice to be able to choose a color that matches the car body.
View detail
self-satisfaction
Good Items to casually assert YOSHIMURA View detail
Even with the lights on, the car will still hit you regardless.
I installed a DriveRecorder.
I was looking for something to put on a staker and found this product.
Stickers, once applied and removed, leave tanning marks or glue, or they naturally flip off.
Plate can be removed without leaving any scratches or stains.
[Thoughts
Cars that are going to hit you will hit you regardless of whether you have the lights on or not.
Probably a driver of such intellectual Level that he can't even read the Alpha bet.
So, translation (it might be better if you type it here!)
The License Plate Light is visible at night thanks to the License Plate Light (the Camera on the DVR is not visible).
It's just for decoration.
The car that runs into the Motorcycle is probably not even aware that the Motorcycle is in front of it in the first place, so it's not a good idea to be on the lookout for it. (Lol)
I don't blame Minus stars for saying this, but I feel the price is too expensive for the product.
Well, it's not a product that can be sold in large numbers, so it's no wonder it's so expensive.
View detail
slightly overcosted
Anodized finish is only on the cap part. The bolt included is a normal bolt.
Given this, it seems somewhat high.
View detail
Fits: Others Universal
License Plate Holder
The unrefined License Plate becomes stylish,
I am satisfied.
View detail
Fits: DUCATI , DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, BMW , KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
Light CarbonLicense Plate
AELLA is very polite, and you can download a PDF file of the full-size drawing to check if it can be attached to the License Plate Base.
Thanks to this, it was possible to install the license plate without drilling a hole for the license plate base, etc.
However, it was necessary to note that the Bolt length to the License Plate Base is not Penetrating Bolt hole. 。
Bolt length 10-12mm was ?? and 15mm was ?.
View detail
The Bolt on the License Plate was about to rust.
The bolt that attaches the number seemed to rust, so we changed it to this TorqueTaperBolt & Nut Set.
I chose the color Silver so that it wouldn't stand out too much, and I'm glad I did, because it looks OEM-like, just as I wanted.
And, since our vehicle has a driver's recorder bracket that is co-tightened, the bolt length was a little longer than other products, but the thickness of the bracket was just barely sufficient to allow installation.
I have no problem with normal installation, but would have appreciated another 2mm or so longer.
The bolt installed on the car at the time of delivery is prone to rust, and it has a large area to prevent tampering? The Bolt installed on the car at the time of delivery is susceptible to rust and tampering, and has a large area to suppress the Number, so depending on the type of car, such as a single cylinder, the Number may be less likely to crack due to vibration? It may be.
View detail
For additional Helmet mounting location
Purchased Helmet to attach it to places other than Mirror.
Installation is very easy.
Simply remove the Bolt from the Number and attach the PlateHolder together with the Bolt.
There is no need to add any other Bolt or Screw.
Anyone can install it in 5 minutes.
This time, I installed it on YOSHIMURA's Fender Eliminator Kit instead of OEM Fender,
No glitches or problems at all.
Also, I installed it with the supplied bolt, but other License Plate Bolt should be no problem.
I think
The construction was quite solid, thicker than I expected and Firmly.
The surface finish is also Beauty.
Helmet holder is Quantity:Pair (for Left and Right) Either can be attached.
Easy to remove and install.
The key part is a bit weak due to pushing, but that's about it.
It's not so much to prevent theft as it is to keep the Helmet on when you leave the Motorcycle for a while.
I personally don't care about it because it is the thing of the
I also installed a Holder on the SIDE of the car, but when the Exhaust System hits the car and it is immediately after running, the Holder is not installed.
It was a little difficult to use, so it is nice to be able to put it on without hitting the Exhaust System.
However, it does hit the Tire a bit, so those who are concerned about sogginess may need to take some measures.
Also, if you are in a windy place, the Exhaust System will sway quite a bit and hit the Exhaust System, so be careful there as well.
The supplies do not stand out as a Custom in appearance.
But the installation is easy and useful.
On the other hand, because it is inconspicuous in appearance, it is not so conspicuous in Styling and Silhouette.
It's good for people who don't want to change.
If the price were a little lower, the cosmetics would be perfect.
View detail
Appearance Carbon
Quantity over FRP:Carbon board with 1pc.
Still, it serves well as a License Plate Holder, so there is no problem.
Glimpses of Material:Carbon Style is Fashion?
View detail
Used instead of Fender
Fender is cut and used in Fender city because it splashes a lot.
There is a big difference between having it and not having it.
View detail
A Little Fashion
Since OEM Bolt is lame (lol),,,, it is a bit Fashion. View detail
Fits: Others Universal
I'm glad I bought it
I purchased this product because someone hit my Number and bent it. It was a good purchase, thinner and more solid than I had imagined.
It was easy to install.
View detail
NumberKit
Purchased to install Japan Standard Number on an imported Fender Eliminator. It is thick and seems to be resistant to vibration. View detail
For Customization around License Plate
I have been using it for a long time for customization and to prevent cracks from entering the License Plate hole since it holds a wide range of License Plate holes.
(The models in the photo are 2022 RIEJU MR250 Racing and Tango250 because they were the only choices available in the system.)
View detail
ExactlySize
License Plate and ExactSize Plate
Unobtrusive, but that's what I like.
View detail
Solidly built
I haven't installed it yet, but I think the texture and look are great.
It seems to be sturdy and does not seem to have any flapping.
View detail
Fits: Others Universal
For reinforcing License Plate
Purchased before License Plate was bent.
Silver is refringing, but the overhang of the Plate is one turn (upper and lower Quantities).:Pair (for Left and Right) (about 2mm each) Large size looks like a large.
The anti-vibration sponge is too thick and the plate warps when the bolt is tightened. I shaved it thin and used it. The attached nut is a loosening stop, so I don't think it is necessary to use it.
The supplied Bolt was not long enough and was purchased at Home center.
View detail
FeedSportsLicense Plate Base
I bought it to see if it could be installed on my R1250GS, but it was possible to install it with only a little interference from the reflector.
The Rear area is Fashion and Refreshing compared to OEMPlateBase.
View detail
Fits: Others Universal
To prevent the License plate from bending
I bought it to prevent it from getting caught on the License Plate when applying the Cover.
It's a small thing, but it's also a dress-up.
View detail
Compliance with new regulations provides peace of mind
Due to changes in the law, the installation method used to be [Color] Since I could not clear it, I purchased a POSH License Plate Holder and a Number Fixing Bolt. This will help me to comply with the stricter labeling rules. [Color] The number fits nicely without any fluttering, and the dress-up effect is outstanding despite being a simple part. View detail