Reviews
It is convenience to an easy custom-made & mischievous measure! It is simply made to a fashionable at a low price. And it is effective also with the mischief which can bend a number. However, since it overflows into the surroundings of a number, p
It is convenience to an easy custom-made & mischievous measure! It is simply made to a fashionable at a low price.
And it is effective also with the mischief which can bend a number.
However, since it overflows into the surroundings of a number, please become brave about the check of an attachment place.
Incidentally, GSR400 interfered in the reflector and was not attached.
View detail
Although fender-less-ized, since the silencer had worn to the half number, it attached for number protection. Since the flue gas of the silencer itself is uncanny, the number is somewhat black, but there is no damage to a number.
Although fender-less-ized, since the silencer had worn to the half number, it attached for number protection.
Since the flue gas of the silencer itself is uncanny, the number is somewhat black, but there is no damage to a number.
View detail
The appearance of RIA can be dressed up easily. A price is also cheap and the custom parts bought for the very first are this. However, as a point to worry, saying [ that the washer (fellow with a color) of a thread part will damage a number plate
The appearance of RIA can be dressed up easily.
A price is also cheap and the custom parts bought for the very first are this.
However, as a point to worry, saying [ that the washer (fellow with a color) of a thread part will damage a number plate ] and the thing which I purchased had the narrow difference width of the lower clip, and since a number plate did not enter, it extended and equipped only with a few by the slotted screwdriver.
View detail
An aluminum license plate holder. (Red) Matching with the (^O^) /fender less attached to CB1300SF is also well pleased with the aluminum spacer of a holder and the same color (--笙ェ stainless bolt is attached, and since anodized processing is carried o
An aluminum license plate holder.
(Red) Matching with the (^O^) /fender less attached to CB1300SF is also well pleased with the aluminum spacer of a holder and the same color (--笙ェ stainless bolt is attached, and since anodized processing is carried out, a holder).
There is also no fear of being rusted and I think that it can use for a long time.
They are items of a recommend at a dress-up group up (^-^)
View detail
The one cylinder heard that vibration is large and a number may crack, and purchased. Texture also holds a number firmly well. Although a bolt, a nut, and a washer also follow together, washers are a holder and the same color. And the pattern
The one cylinder heard that vibration is large and a number may crack, and purchased.
Texture also holds a number firmly well.
Although a bolt, a nut, and a washer also follow together, washers are a holder and the same color.
And the pattern is carved and touch is made very good.
Although it is good also for a vibration isolation, appearance also becomes suddenly better and is satisfactory.
View detail
Attachment is an easy number frame. it became brave very well -- it is likely to make and come out and seems to be strong also to a twist. The washer of the same color by which coloring was carried out is also attached.
Attachment is an easy number frame.
it became brave very well -- it is likely to make and come out and seems to be strong also to a twist.
The washer of the same color by which coloring was carried out is also attached.
View detail
DRC:aluminum license plate holder 126cc - business -- on a number, the POSH:aluminum tooling bar for load credit is fixed. Although tone is delicately different, compared with the picture of HP, it is [ that it is easy positively ] blue.
DRC:aluminum license plate holder 126cc - business -- on a number, the POSH:aluminum tooling bar for load credit is fixed.
Although tone is delicately different, compared with the picture of HP, it is [ that it is easy positively ] blue.
View detail
Since the end of the number plate was sharp and was likely to damage when a cover was attached, it equipped. The color was the same as the body color, and it made it into blue. Since it is thick, it is also likely to become protection of a number
Since the end of the number plate was sharp and was likely to damage when a cover was attached, it equipped.
The color was the same as the body color, and it made it into blue.
Since it is thick, it is also likely to become protection of a number plate.
View detail
For number protection on a path through a wood etc. He bought it. When it arrived at first, I thought that it was dissatisfied in the blue which is not more skillful than the photograph of an article introduction. However, this blue will be correc
For number protection on a path through a wood etc. He bought it.
When it arrived at first, I thought that it was dissatisfied in the blue which is not more skillful than the photograph of an article introduction.
However, this blue will be correct and satisfied if it attaches to a motorcycle.
The photograph was somewhat regrettable although it was satisfied with the goods themselves.
View detail
Since it fender-less-ized, it purchased. Although the attachment itself was easy, unless it interfered in the fender less kit and it cut the part, it was not attached. Appearance is quite good.
Since it fender-less-ized, it purchased.
Although the attachment itself was easy, unless it interfered in the fender less kit and it cut the part, it was not attached.
Appearance is quite good.
View detail
Since the flesh side of a number plate is uneven and became dirty easily, it was purchased. The portion of the nail which can scratch a plate did not open enough, but it required correction. I think such rubbed wax with in price.
Since the flesh side of a number plate is uneven and became dirty easily, it was purchased.
The portion of the nail which can scratch a plate did not open enough, but it required correction.
I think such rubbed wax with in price.
View detail
According to the color of a car body, he bought it. It is comparatively [ light ] solid and is very good touch. Due to the fender less kit merely attached together, a few has been covered to muffler opening.
According to the color of a car body, he bought it.
It is comparatively [ light ] solid and is very good touch.
Due to the fender less kit merely attached together, a few has been covered to muffler opening.
View detail
Since the motard bike and the off-road motorcycle heard that a number plate breaks in vibration. It opted for introduction of the aluminum license plate holder. The color was also on the car body and there was worth put in since it led also to sag
Since the motard bike and the off-road motorcycle heard that a number plate breaks in vibration.
It opted for introduction of the aluminum license plate holder.
The color was also on the car body and there was worth put in since it led also to sag prevention of the number.
View detail
It attached at the D tiger X acquisition date. The blue plate holder was attached to the blue car body, and the image when seen from back also became good. I think whether for it to be sharp and to be sometimes dangerous, if a number plate continu
It attached at the D tiger X acquisition date.
The blue plate holder was attached to the blue car body, and the image when seen from back also became good.
I think whether for it to be sharp and to be sometimes dangerous, if a number plate continues being nakedness, and to play a role also in the durability of a plate, and the theft to tear off.
They are goods which attach and do not have loss absolutely (^^)
View detail
It equipped with formation of a its original work fender less. A number plate was not able to fit in the lower projection portion easily on the occasion of attachment, but it was able to extend with the driver reluctantly, and was able to attach at la
It equipped with formation of a its original work fender less.
A number plate was not able to fit in the lower projection portion easily on the occasion of attachment, but it was able to extend with the driver reluctantly, and was able to attach at last.
I think that it is suitable for the little accent of the circumference of rear one.
View detail
It attached to 08' D-TRACKER X. Since the body color was yellow, gold was used. A motorcycle cover also becomes difficult to be caught, and appearance also became better than imagination and it has satisfied it. This is a recommend.
It attached to 08' D-TRACKER X.
Since the body color was yellow, gold was used.
A motorcycle cover also becomes difficult to be caught, and appearance also became better than imagination and it has satisfied it.
This is a recommend.
View detail
It attached to XR250 motard. An edge aluminum holder kit and pure blinker stay were also purchased simultaneously, and were attached. Since the wheel was gold, my XR was taken as the gold of the same color. There is also a duty which prevents
It attached to XR250 motard.
An edge aluminum holder kit and pure blinker stay were also purchased simultaneously, and were attached.
Since the wheel was gold, my XR was taken as the gold of the same color.
There is also a duty which prevents a number from becoming dirty from exhaust steam of a muffler at the same time the parenthesis became good conjointly with the color of the wheel.
Since structure also seems to begin to be strong and the omission of a number are not likely to have things at vibration, either, I will consider it as a five stars.
View detail
It has the experience at which the motorcycle cover was caught in the number plate and turned, and purchased. I think that attachment is also easy and it is good also as a sushi color accent.
It has the experience at which the motorcycle cover was caught in the number plate and turned, and purchased.
I think that attachment is also easy and it is good also as a sushi color accent.
View detail
[Buying motive] ZRX1200 (06') is owned. Since the motorcycle cover was torn with the edge of the plate although it thought that the dress-up of a number plate up was unnecessary, the plate was covered with this product, and the angle was smoothed.
[Buying motive] ZRX1200 (06') is owned.
Since the motorcycle cover was torn with the edge of the plate although it thought that the dress-up of a number plate up was unnecessary, the plate was covered with this product, and the angle was smoothed.
(since the motorcycle cover of a fire prevention type is also expensive) Since the reflector and the number plate are fixed to - fender less kit [to demount (existing product)] by the hook of gold, a bolt is removed from the number plate back side.
- [to attach (this product)] -- after fixing a number plate to this product first (nail), it fixes to the existing bolt through this product and an attached aluminum washer.
(the stainless bolt nut of this product attachment was not used) Are they only [existing product removal time] and 10 minutes?
[This product attachment time] Is it only - 20 minutes?
[Result] It was finished with the image which spoils special fender less-ization as - and as for which things are not.
(Although the license holder of carbon was examined at the beginning)
I hear that it was cheap and has achieved the purpose. Is it a place as four * as it is [grading of goods] above understood that it is comparatively [ expensive ] large-patterned and there are many goods whose meaning of special fender-less-izing is lost as a result of investigating in the shop etc.?
View detail
It attached to D tiger. By a number plate entering, since it was hot, the lower connection portion was extended somewhat forcibly. Moreover, by the pure muffler, by the vehicles of the fender less, since exhaust steam hit the plate for a while, st
It attached to D tiger.
By a number plate entering, since it was hot, the lower connection portion was extended somewhat forcibly.
Moreover, by the pure muffler, by the vehicles of the fender less, since exhaust steam hit the plate for a while, stay was used independently, and the number was brought near and attached to the battery side (car-body left).
View detail