Reviews
rigid
I was worried about whether there would be any deflection since it is fairly meatless, but no problem.
More stable and easier to hang than Bobbin type.
It is also good to not have to worry about pushing and damaging the Swing Arm in the event of a fall.
View detail
PetitCustom
I considered AELLA products, but I didn't like the protruding ones, so I decided to go with this one. The operation was good without damaging the boots. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI SV650, SUZUKI V-Strom250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-8S, SUZUKI GSX-S1000GT
It is a 22 HAYABUSA, but it is narrow.
The quality of the product itself is good, and unlike other Hooks, the black part inside turns, so it is hard to scratch when raising it with the V-shaped Hook. However, the distance between the Swing Arm and the Rear Stand is so close that the tip of the V-shaped Hook on the Rear Stand might hit the Swing Arm if it were left as is, so I put a collar between the Swing Arm and the Rear Stand (2nd photo). The attached Stainless Color Bolt is thinner than the Universal Product Bolt, so if I use the Universal Product Bolt, the head will stick out. Therefore, I will give it 3 stars because it is not possible to combine a long bolt with a thicker color. View detail
Simple and good.
I was looking for something simple, but I found one with a large manufacturer's logo, which did not fit my taste.
I purchased the Titaniumium color and I like it because it is simple.
View detail
A-TECH Earplugs
At a quick glance, the texture is no different from TRI*ST*R and this Slider.
The packaging is insanely kind, protecting the Screw part with Tape to prevent Garbage, etc. from sticking to it.
StickerQuantity as a bonus:1 Set of 2pc.
Just in time for earplugs, man! (This product is HookSlider. Good kids don't copy it!)
View detail
Purchased for ApriliaRS660
I bought this for ApriliaRS660, but when I ordered it in M6Size, the boss was very Small and I stopped installing it. Now I am installing the one I bought separately. The quality and color of the product was very good, but I was disappointed. View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, SUZUKI GSX250R, KAWASAKI Z650RS, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSX250R, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-Strom250
great accessory
The original factory of the motorcycle is not equipped with a parking device. If you need to use the rear wheel parking rack, you need this YOSHIMURA rear rocker column ball set. The workmanship is very delicate. It combines cutting aluminum alloy and resin bushing , The part of the resin bush can be rotated, it can be parked smoothly, and at the same time, it can prevent scratches on the contact surface. The original lightweight design reduces the weight and also has a handsome appearance. -------------------------------------------------- -------- The original motorcycle is not equipped with a parking device. If the rear wheel parking frame needs to be used, this Yoshimura rear rocker column car group is needed. The workmanship is very delicate. tree can be rotated, which can be placed steadily, and at the same time to prevent scratches from the contact surface. The original lightweight design is reduced, which reduces the weight and has a very handsome appearance. Powered by Google Translator View detail
J-TripOEM Product
It hangs well, and the compatibility with J Trip's STAND is as OEM as you would expect. The extension collar reduces the risk of scratching the swing arm. It may not be good for those who wear it all the time because it looks longer, but we chose this one because we remove it every time we use it. The color will fall off if you are not careful when removing it, which is a slight minus point. View detail
Stand hook slider
The gold and plastic parts are not crimped on one side, so it turns round and round, but it is still usable. View detail
Buy for Maintenance
I replaced the Swing Arm with a Swing Arm that allows for the attachment of a Stand Hook, so I installed it.:I was considering DURACON, but it was too expensive.:I purchased Aluminum.
The installation itself does not seem to be difficult, but the Bolt included in the kit was 1.25 pitch and did not fit, so we had to purchase a separate Bolt.
We recommend this product because of its low price, despite being a product of a well-known manufacturer.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
no problem
I used it on my Z900RS.
I had previously used an anodized swing arm hook on another motorcycle, but it originally interfered with the Jack, so it was scraped off and the substrate showed.
The swing arm hooks here are made of a plastic-like material, so the color did not peel off even after hanging jacks.
I was also satisfied that it was long enough to not interfere with the Swing Arm.
View detail
It's good looking, but …
Anodized treated, colors are great, design is cool! …However
Is it not suitable for a racing stand…? Compared to other Hooks
It is hard to STAND. I am also worried because I don't think it is very hard.
Recommendation for those who prioritize looking good!
View detail
Too much sticking out, unreliable and uncool.
I am sure we are mistaken, but the distance from the outside of the bottom edge of the rear suspension to the mounting collar of the rear stand is wide, and although I cannot explain it well in words, the diameter is thin and unreliable. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I am satisfied with the solid construction and Large change.
It is well made and I am satisfied with the Large change. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000F, SUZUKI GSX1300R HAYABUSA, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650X, SUZUKI GSX-8S, KAWASAKI ZX-10R, DUCATI 999, DUCATI 999S, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-R1000R, SUZUKI SV650, SUZUKI GSX-S1000GT
Outstanding functionality and design.
Various manufacturers have released STANDBrackets with good appearance and parenthesis, but I think this one is outstanding. Of course, the functionality is also sufficient. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Used for Z650RS
It is for Z900RS, but it was attached to Z650RS normally. View detail
Pricey, but the stuff is good.
[How is it used?
Fits ZX-6R 2023
Used for chain adjustment and wheel removal/attachment.
Was the one you received as per Image?
It arrived in beautiful condition with no scratches.
Was the installation difficult?
It is easy to install with Bolt1 pc.
It is necessary to have a certain sense of the material, since the stipulated Torque is not explained in particular, but Material:Since it is a DURACON Slider, even if it becomes Overtorque, the resin part will be crushed, so you may not have to be so nervous.
How was your experience with it?
The common Anodized Treatment Stand Hooks are noticeably scratched and scraped when used, so even if it is not a problem in practical use, it is bothersome.:I chose DURACON, and even with DURACON, scratches will appear, but they will not be like peeling paint, so they are somewhat less noticeable.
The fact that it also doubles as a Swing Arm Slider was another point that led us to purchase it.
Material on all SS such as ZX-6R.:AluminumSwing Arm is vulnerable to strong impacts and is expensive, so we chose Stand Hook, which offers the best protection possible.
[Was there anything that disappointed you?
It's a little pricey, and I wish it were cheaper since it's UniversalParts, but the thing is well made.
[Good to have].
BoltMarker, Screw lock agent
It depends on how often you use the Stand Hook and how often you ride your motorcycle, but I think it would be safer to have a stand hook because it is also a place where loads are applied.
View detail
For those who have problems with Rear stand
Purchased for YZF-R6 Rear stand, can be installed with Bolt On.
It is super lightweight with a considerable amount of meat removal. The back of the Level is particularly artistic.
Compared to the conventional Spool type, the distance between the Swing Arm and the Rear Stand is greater, making it extremely effective in preventing scratches.
Bolt holes can be prevented from being damaged when tipping over. In addition, the force required for jack-up is reduced.
The quality is quite high and the Cost performance is the best. I can recommend this product.
View detail
899 Panigale is M6
I bought M8 by mistake for 899 Panigale use, but bought M6MODEL because of its good texture.
Simple and robust design was highly satisfactory.
View detail
Bolt size was wrong, but the quality was high.
I tried to use it on my Panigale, but gave up installing it because it was an M6 instead of an M8.
However, we switched to M6Spec. because of its higher quality compared to the price.
The product was designed with no problems in installation and the texture of Aluminum, and was recommended.
View detail