Reviews
Necessary and sufficient+.
I am satisfied with the price, the quality, and the feel of the product. I would like to have more parts that can be attached because I like the Manufacturer. View detail
I bought it for its appearance, but it is also well made.
I purchased this for customizing the look of my OEM Swing Arm after Polish processing! The picture of the product looked large, but when I installed it, it was a nice large size. Installation was easy and since I did not intend to use the CrabHook, I installed the original Hook for the Racing Stand with it. View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
Good stuff
[How is it used? Used during maintenance.
Was the one you received as per Image? Yes.
Was the installation difficult? Bolt On.
How was your experience with it? It's convenient
[Included Parts:were they on? Mounting Bolt
[Was there anything that disappointed you? None in particular
Other items that would be helpful
Points and hang of installation/Availability and comprehensibility of Instruction Manual/Points to note/Items to be purchased together/Opinions and requests to the Manufacturer Could the price be a little lower?
View detail
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
It is also a good product
After considering several products, I chose Baby Face. Again the quality is very good
It fits the 2023 katana well, so don't worry and order it. It seems to be convenient for chain management
It is a good item and not too expensive. WeBike is also reliable in shipping ------------------------------------------- --------------- I was worried about various products and selected baby face. After all, the quality is very good It's a good fit for Katana in 2023, so don't worry. I think it can be convenient when managing chain The price is not burdensome and it is a good item. Webike is also reliable Powered by Google Translator
View detail
Spacer is required!
I installed Spool on Z900RS, but there are many parts that overlap with Swing Arm, so I think it is better to install Spacer and Spool.
The texture was 0.
View detail
Fits: SUZUKI GSX-S150, SUZUKI GSX-R150, SUZUKI GSX-S1000, SUZUKI SV650 ABS, SUZUKI GSX-8S, DUCATI 999, DUCATI 999S, KAWASAKI ZX-10R, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R HAYABUSA, SUZUKI SV650X, SUZUKI GSR750
The maintenance stand bracket is recommended by Yoshimura.
The quality is good, and especially the size is large, so there is less anxiety when raising a maintenance stand.
And I like it more because the point color is not too bright red.
In terms of size, it seems to be compatible with Katana, Haabusa, S1000, S1000GT, R1000R, etc.
(Probably, if the size is similar, everything will be compatible.)
-------------------------------------------------- -------- The quality is also good, and especially the size is large, so if you raise the maintenance stand, you have less anxiety. And I like the red color that the point color is not too much. In terms of size, it seems to be compatible with Katana, Ha-a-ads, S1000, S1000GT, and R1000R. (Probably if the size is similar, it will be compatible.) Powered by Google Translator
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 DAEG, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
for safety lift
The surface is very clean, and the installation is very easy. Fasten the enclosed bolt to the swing arm. The surface is smooth and beautifully finished It looks strong enough. The lift requires a spool-shaped hook receiver. Please refer to the picture Also, if you apply rock tight when you do bolting I think we can prevent loss in advance. View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
usually
Very normal, just as I imagined. I don't have STAND, so it's just for decoration. View detail
Not too obvious, but good.
I purchased it at the same time as the Maintenance Stand.
There are gold and titaniumium color, but I chose titaniumium color because I didn't want to stand out in a strange way.
Installation is very easy.
I actually used it as a Stand Hook, no wobbleetc. and no problems. Of course it gets scratches, but that's normal, so I don't mind.
The price is cheap and recommendation.
View detail
Fits: KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Work
I installed it on a 2021 RC390, but the bolt that came with it did not have the correct pitch, so I used a bolt sold at a local home center.
We purchased this item because we just had the Orange color in stock.
After using it for a while, the color faded due to ultraviolet rays? After using it for a while, the color faded due to UV rays.
I didn't have any problems using it on Jack-up, but if you are concerned about how it looks or when it is left mounted on the car body, you may need to take some measures to prevent it from looking bad.
View detail
Kawasaki Stand Hook
It was supposed to be for a ZX-10R, but I was able to install it without any problems. View detail
Used for JC92Front
I installed this on a Grom JC92Front. The Right Side Axle Nut of the JC92 is a UNut, so it is very tight. I couldn't turn it with a normal ratchet handlebar, so I extended the Spinner Handlebar + handle with a Pipe.
The Right SideAxle Nut has a 19mm socket, but I was a little worried.
View detail
Stand Hook
I installed this on my 23 cbr250rr. It is well secured and solid and I am not worried about it falling over. View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Purchased with Maintenance Stand
I purchased the V-receiver for the Maintenance Stand and bought it together.
Since the bar end was Posh's, I chose the same Manufacturer.
I thought the color was the same, but is it slightly different? Is it the light or my imagination? It may be hard to tell from the photo, but I'll put it up just in case.
View detail
Fits: APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4
Genuine R&G Swingarm Cotton Reels for RSV4 2016
These were purchased to add a little protection and also to utilise a paddock stand for maintenance on the Aprilia RSV4 2017 model. The part was pretty easy to find with using the R&G website. Webike price was really good and with a few other parts in my order, all was shipped and delivered by EMS in 5 days. All was packaged really well and no damage. These are super nice spools for the bike, they are fairly chunky but this means you will not have an issue with slippage like you get with some of the small spools. I have had previous experience with these in the even tof a crash, they relly do protect the spindle to the rear wheel. They are made from a plastic mix but I am unsure of exactly what. The spools themselves look great when fited and the R&G logo printed on the sides is a nice touch. Really clean and machined good. You even get a set of new bolts that are stainless steel I believe. Very pleased withe the purchase. Thanks Webike. View detail
I like it because it looks like Mr. Battle.
Short Type.
I am a wait-and-see motorcyclist, and I chose the short length in order to limit damage in the event of a fall.
I like Battle's products because they are generally suitable value with Stages.
Note that it is more difficult to use than Long Type for private use.
View detail
Material:Plastic is sufficient.
With Gold, you will be disappointed when scratches appear while using the product.
Material:I like Plastic because it doesn't show any crumbs and is very simple.
View detail
Acts as a Guard. Fade resistant
It is a Stand Hook of a fairly Large size.
The color purchased is Gold; it is a somewhat bright Gold color as shown in the product image and has not faded in the 4 years I have had it on. The weather resistance is quite high.
It functions well as a Stand Hook, and the large size makes it easy to hang.
It also functions as a guard in the event of a fall. In fact, it also works as a guard in the event of a large fall, and a large down type exhaust system was able to survive with only a small scratch.
I was afraid that the Swing Arm side of the support would bend, but the material itself is soft and the large size makes it firm and secure. "Spinning away." The Swing Arm side did not bend.
I used to use MORIWAKI's product, but the catch on the Swing Arm side bent even after a light fall (after that, I replaced the Swing Arm and started using this product).
I can recommend it because it stands out rather prominently due to its large size and color, and it is inexpensive as well.
View detail
They Do Offer a Much More Stable Platform to Work on the Monkey 125
About quality and texture: I am happy with the quality of the suspension spools from G-Craft. The spool is made up of two parts that are secured together with the included fastener. The material used is aluminium with the black surface being anodized and the silver surface being a raw finish. About the feeling of use: I find these spools a useful addition when working on the Monkey 125 from cleaning and lubricating the chain to stabilizing the rear end to allow the front end to be lifted to remove the front wheel. Products to buy together: Some lifting hooks for your rear servicing stand would also be desirable to purchase alongside the suspension spools. Difficulty of installation: The process to install takes about 10 minutes. Remove the OEM Honda rear shock nut and install and torque down the silver part of the spool and then install align and tighten the black part with the included fastener. Repeat the process for the other side. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting quality materials and finishes with this product at a higher price as compared to the stainless steel option available on Webike and the even cheaper quality option available elsewhere. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: You may think these suspension spools are not neccessary but they do offer a much more stable platform to work on the Monkey 125 then just using the platforms on the rear servicing stand. View detail
Dress-up
Using Lift jack is now much easier.
The installation was a bit tricky, as the angle of the fixing spacer needed to be adjusted when tightening the bolt.
View detail