Reviews
HondaOpposite Thread Screw
HondaMotorcycle is a Quantity:Pair (for Left and Right) I had a hard time finding Opposite Thread Screws for the Stage6 Mirror, but I was able to find Repair Parts for the screws only. Incidentally, Stage6 Mirror can be disassembled into RoseRose, so I was lucky to get both Opposite Thread Screws without changing the appearance! View detail
Scratches easily
Purchased for Mirror replacement.
I had heard that it was prone to scratches, so I worked with caution, but the scratches were firmly in place.
It's a cheap product, so maybe it can't be helped, but I'd like it to be made a little sturdier.
View detail
Mirror side 10mm
Buy 8mm Adapter, note that it is 8?→Mirror side 10?→Mirror side 8?→Mirror side 10?→Mirror side 8?→Mirror side 10?→Mirror side 10?
I am disappointed because I intended to use the 8mm height adjustment screw. I guess it is only in stock and not produced, but I think a better description of the product is needed.
View detail
It is a reliable Napoleon On product.
This product is a trusted Napoleon product and you can rest assured that the Adapter will be high, so that's a Point that needs attention! View detail
Mirror bolt
I purchased this bolt to change the diameter of the Mirror bolt. I recommend TANA-X's Bolt for Mirror bolt conversion because they have a wide variety of bolt types. View detail
It can also be used to adjust the height of Mirror.
This product is what is called an Opposite Thread Screw Adapter, but I used it to adjust the height of the Mirror, and the screw is very precise and did not come loose! View detail
Kills two birds with one stone by adjusting the height as well.
[How is it used?
Used to install Mirror from Other Brand Product, a must have for Yamaha vehicles. I have used it on various Yamaha cars.
Was the one you received as per Image?
The surface is cast iron with a semi-glossy painting, so it blends in with the surrounding parts.
Was the installation difficult?
Pimping. When installing Napoleon's Shark Mirror 1B, the Right Side had to be raised because the Accelerator Wire and Mirror Bracket interfere with each other, and the height of the Opposite Thread Screw Adapter was too high. The 20mm length was just right.
How was your experience with it?
The Mirror is now installed Refreshingly, and the eye movement distance is slightly reduced because the Mirror is slightly higher.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It doesn't now that it is installed, but it is susceptible to rust and will rust in less than a year if it is not well cared for after rain (in my experience so far).
Other items that would be helpful
Opinions and requests to Manufacturer:Material already in your products:There is a Stainless Steel Opposite Thread Screw Adapter, but please release a Black Dyed Stainless Steel Opposite Thread Screw Adapter even if it is a little expensive. It's my dream for many years.
View detail
CT125 CT110 HUNTER CUB Quantity:Pair (for Left and Right) Exactly to align Mirror back and forth
[How is it used?
The OEM LeftMirror Holder is located closer to the front (body side) than the Right Mirror Holder, which reduces visibility.
Quantity:Pair (for Left and Right) The LeftMirror Holder was introduced to shift the LeftMirror Holder forward because of the uncomfortable difference in the front/rear position in the
Was the one you received as per Image?
The surface has a luster feel, and I felt it had a higher quality feel than the OEM Mirror Holder.
How was your experience with it?
As per Image, Quantity:Pair (for Left and Right) The difference between the front and rear at the left and right mirrors is no longer a concern, and the LeftMirror is now in front of the
Rearward checks are now easier.
There was no change in Mirror vibration while driving.
View detail
Diversion to Mounting Bracket of Asahi Windshield
Used in place of the mounting bracket of the Asahi windshield, which is notoriously difficult to position.
Even when tightened, Quantity:Pair (for Left and Right) In this case, it is easy to create a Center by simply aligning the height and opening angle.
The bracket of the Asahi wind shield is a standard mounting bracket, and if you tighten it strongly, it is likely to crush the screw mount, so if there is any damage to the mount, it is better to use a new bracket.
View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Mirror adapter.
Acquired for moto Honda Monkey. Once again I take these adapters and once again I have to edit the internal thread. The price of adapters is rising, but unfortunately there is no alternative. Sadness... Acquired for moto Honda Monkey. Once again I take these adapters and once again I have to edit the internal thread. The price of adapters is rising, but unfortunately there is no alternative. Sadness... View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus
The quality of the exterior is poor.
[How is it used?
I bought a new CYGNUS X SR5 model for my commuter car and purchased this adapter to replace the mirror.
With this Adapter in place, I am using a Baren classic, Black color, from Tanax Napoleon Mirror.
Was the one you received as per Image?
Although it was as per Image... I thought it would be in the Blister pack like Tanax.
It came in a Petit bag, just like normal OEM Parts. I don't mind this, but...
The Adapter clashed with each other inside the bag, and became covered with scratches.... Or rather, the texture of the product is rather rough to begin with.
Please refer to the pictures.
Was the installation difficult?
For CYGNUS X, the Right Side is Opposite Thread Screw, so be careful.
Turn counterclockwise for Left and clockwise for Right to loosen. Also, the screw on the recessed side of the Adapter is an M10 Opposite Thread Screw.
The Mirror side also needs to be an Opposite Thread Screw.
How was your experience with it?
It fulfills the function itself, which is nice. The height isn't too high or too low.
BAREN classicMirror is a nice addition to the collection.
[Included Parts:were they on?
No, I don't! Tanax's Adapter came with a Washer, I believe.
I wish this came with it.
[Was there anything that disappointed you?
After all, is it the texture part? It's not a problem when it comes to function, but
This is a part that you will see all the time when you ride your motorcycle, so I hope you will pay attention to it.
To be honest, Tanax's Adapter has a beautiful Black Painting, so if you care about the appearance
We recommend Tanax.
View detail
I'm happy with how high Mirror can be positioned.
I bought and used the Tanax OffsetHolder and Cap to raise the height of the mirror, which made it easier to see behind me. I've been using my eyes nervously and had a lot of eye fatigue, but that seems to have lessened considerably! View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Not adapted to ja44
The mirror side Opposite Thread Screw fits, but the body side Normal Thread Screw diameter is different. I'll buy OEM parts now. View detail
Fits: SUZUKI SV650, SUZUKI SV400, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1100W, SUZUKI GSX-R1000, KAWASAKI ZXR750, KAWASAKI ZX10R, KAWASAKI ZX10R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI ZX-6R, HONDA VTR1000SP2, HONDA VTR1000SP1
One piece.
Quantity:Pair (for Left and Right) If you need both, you will need to purchase two copies.
The finish of the product is very good and worth the Gold price.
Includes mounting bolt, nut, washer, and rubber cushion.
View detail
No drawbacks other than easy to rust when exposed to rain.
This is required equipment when installing UniversalMirror on a Yamaha vehicle.
As you know, Yamaha uses Opposite Thread Screw for RightMirror, so it is not possible to use Quantity:Pair (for Left and Right) Normal Thread Screw cannot be used with commercially available Mirrors.
This is the Adapter to solve that problem.
The Left Side is not necessary, but Quantity:Pair (for Left and Right) In order to adjust the height of the Quantity, the Left Side is also included.:2pc. Set with Quantity:1 Set for 1 Vehicle is Quantity:Set
There are two types of paint:Black and Plating, but I choose Black every time because it does not reflect light and is not noticeable in my field of vision.
It's new, so it's still clean, but in the past, I've found it to be very rusty, which is a weakness of this adapter.
(No matter which Manufacturer's Adapter you choose, it will be very rusty)
The Adapter surface can be prevented from rusting by cleaning it frequently and spraying it with silicon spray, but the problem is the screw mountain part.
I don't know if this is due to the fact that the screw part of the mirror is iron and the mirror holder is aluminum, which causes electrical corrosion, or if it is due to the capillary action that allows rainwater to enter.
So, the recommendation is to lubricate the screw part first.
Just a drop of engine oil and screwing it in makes all the difference.
However, when the screw threads are lubricated, they become overtorque, and it is easy to destroy the receptacle screw on the Mirror Holder side when tightening, so be careful about that.
View detail
For Mirror height adjustment
I bought this in the store to adjust the height of the movable mirror. I'm very happy with it. View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Mirror adapter NTB
A useful detail. There are no complaints about the material and external thread, but the internal thread was poorly executed. I had to go to the master for internal threading. Due to the fact that there is no alternative to these adapters, in the future I will order them and roll threads if necessary. A useful detail. There are no complaints about the material and external thread, but the internal thread was poorly executed. I had to go to the master for internal threading. Due to the fact that there is no alternative to these adapters, in the future I will order them and roll threads if necessary. View detail
I used it for MeterCustom in DAX.
When replacing the DAX Meter with a Takegawa
I used it as a mount base to the Handlebar.
Compact both horizontally and vertically, so you have a lot of flexibility.
It's easy to see and I was able to put the Meter in just the right place.
I think they are the same as the Navigation Holder Parts, but they are 22.mm and 25mm.
It can be used with both Handlebar, so it is useful for Custom use.
View detail
The Adapter for Shark mirror
I bought the Shark Mirror 4, but the Brake master cylinder seems to interfere with it, so I bought this one. It is a solid construction because it is made by Tanax.
However, for some reason, the screw on the Mirror side has a forward and reverse Quantity:Set。
Quantity of positive and positive or reverse and reverse:I think that the lack of Set is not a good thing cosmetically. I wanted the reverse and the opposite, I had to buy two.
View detail
Satisfied with the performance as expected
I bought it to cover the low height of the Cross 3Mirror, but the Cross 3 can be extended in the direction of the mirror with this Spacer, so I finally used it there. I was able to install it with a Washer on top to absorb vibration. View detail