Reviews
Nice grip!
There are many types of quake-resistant Grip, and I was wondering which one to choose.
I actually held it at a motorcycle supply store and was impressed with its grip!
I decided to change the Grip. This is the one I've decided on.
Of course the earthquake resistance effect, but the design of the appearance is also parenthesis good.
At first I was a little worried about whether it would match the Separate handle. I was not sure if it would match the Separate handle, but it's a good match.
The grip shape is oval, so be careful to adjust the angle when installing.
It is recommended to purchase the Grip bond for seismic gel as well.
View detail
Quantity:Pair (for Left and Right) The length is different in
[How is it used?
I installed it to reduce fatigue during long distance touring.
Was the one you received as per Image?
It is exactly as shown in the product photo, but I thought the logo design on the surface of the Grip was a bit unnecessary, so I installed it so that the logo was facing down so that it would not be visible from above.
Was the installation difficult?
I used the special Bond from DAYTONA and it was not so difficult to install.:Pair (for Left and Right) I used Spacer on the Left Side of the longer one to adjust the length of the Bar End.
How was your experience with it?
Specific rotation speed at high speed (5,000 to 6,000 rpm) I am no longer bothered by the vibration in the
[Included Parts:were they on?
There is none. There is no instruction manual either.
[Was there anything that disappointed you?
Logo design is not good. Simple is best.
Other items that would be helpful
I think it is better to use the special Bond of Items/DAYTONA which should be purchased together.
View detail
Good elasticity and Grip
I put this on my YZ450f to try it out. It's cheap but a little thicker than the OEM Grip, Shock absorption and a little thicker than the OEM book so it's easier to grip.
Durability seems to be better than OEM as well.
The OEM Grip will be torn to shreds in two hours if you run the Motocross course seriously, so this one has fewer color variations, but I'm generally satisfied.
View detail
Mirror LensGoggles with excellent cosmetics
[How is it used?
I was looking for something with Mirror Lens, and I found this product. When I looked for the one with Mirror Lens, this product was hit.
The DRC Goggles were affordable, but I was attracted to the wide variety of Replacement Lenses.
Was the one you received as per Image?
Exterior is Flow Color:Yellow with Gold mirror is a fancy word. The texture is not bad.
The part that touches your face is like a raised finish and gentle to the touch.
I'm afraid to say that the price is in the 5,000 yen range.
How was your experience with it?
The price is around 5000 yen and it comes with Mirror Lens. I am satisfied with the appearance.
The Mirror Lens has a base color of Amber, which gives a slightly orange tint to the vision, and while the Mirror Lens used by SCOTT was mirrored on one side, this one is mirrored on both sides. The Mirror Lens that I used in SCOTT was mirrored on one side, but this one is mirrored on both sides, so if you look at it from the inside, you can see a slightly wrinkled pattern. If you put it on, you won't mind so much, but if the incident light is strong, there is a time when it becomes a little diffuse reflection. I do not care much, but there are personal differences, so please be careful if you are concerned.
Also, the curvature of the surface that touches the face is tight, which makes me think that this is EUROFit. the frame is hard, so it hits the cheeks hard, and the nose feels weak. the SCOTT (the old 89 series) has a softer frame and a looser curvature, so the nose feels tighter. The frame is softer and the curvature is looser, so the nose has a better fit.
As for fogging, it's not particularly hard to fog up, it's just normal.
[Points to note]
As I mentioned above, I feel like the visibility and fit of the Lens is something you may or may not like.
There is a Tear off post on the Lens and it is a bit in view. It might bother some people.
I don't use glasses, so I don't know if it's good or bad, but the frame has a string escape cut. I don't know if it is good or not, because I don't use glasses, but I think that large glasses can't be used because of the curvature and largeness of the frame.
How did it compare to other products?
In addition to the Fit feeling written above, it takes time to change Lens because the frame of PROGRIP is harder. At first I bought Clear Lens at the same time thinking that I would replace it with Clear Lens and use it, but it takes a little time, so I have not replaced it and used it. I think it's easier to buy another ATZAKI or RaceLine for Clear Lens because the price is also price. However, I think that the protection against flying objects is good for hard, so I think that this is also TradeOff feeling.
View detail
A Grip for different tastes
After installation, I let a younger man try to hold it and he didn't respond well.
But when I hold it myself, it feels rather comfortable.
I can only say that this is a matter of taste, but I thought it was good, so I gave it a high rating.
View detail
It reduces vibration and may make you less tired?
[How is it used?
I installed this product along with a Refresh of the Handlebar area of the vehicle I purchased.
Was the one you received as per Image?
I bought this after checking the actual product at a Motorcycle supply store and it is as Image.
Was the installation difficult?
Just apply a thin coat of Rubber Bond to the inside of the Grip, and then screw it into the Handlebar.
How was your experience with it?
The material itself is soft and reduces some vibration from the Handlebar.
The Grip feel is also good, and combined with the above, helps reduce fatigue.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) I think the Grip is like a Large Grip of any Manufacturer.
[Was there anything that disappointed you?
Maybe it's the color, but the dirt is very noticeable.
Because of the soft Material, durability may not be an option to some extent.
0Other items that may be useful include
Point and hang of installation
In winter, it may be easier to work with a slightly warmer temperature.
After I install it, I use Tie Band to tighten both ends and the middle and leave it for 1 day to fix it.
[Availability and clarity of the Instruction Manual
The thickness of the grips on the Axel side and Clutch side are obviously different, so even without the Instruction Manual, I'm sure you won't make any mistakes...
[Notes]
Not particularly
Well, there are two types of people in my group, those who apply Bond and those who don't, but I am the one who applies Bond because I don't want the grip to turn while driving.
[ITEMS TO BUY TOGETHER
If you are a Bond painter, you should buy a strong RubberBond.
[Opinions and requests to Manufacturer
The Large variation is helpful because it lineups a wide variety of grips.
Thank you for your continued support
View detail
The drainage holes are in place.
[How is it used?
The Fork Boots I had on before my SEROW 225 were falling apart and torn, so I bought these to replace them.
I was troubled with the Neoprene gator of Achal Screw which looks good Parenthesis and is inexpensive, but I heard that there is difficulty in durability and finally settled on this one of Orthodox bellows type.
Was the one you received as per Image?
ImageThe texture was better than I had imagined.
There was also a drainage hole.
Was the installation difficult?
I had to remove the Fork from the car body to install it, and it was actually my first time.
I took it off with instruction and put it on over the top.
How was your experience with it?
So far, so good. Well, I'm just covering it.
If you get a chance to drive in the rain, you'll want to check the drainage holes to make sure they're working properly.
Expect durability from the texture.
[Included Parts:were they on?
It comes with 4 Tie Wraps. Also, it came with a PROGRIP Sticker.
[Was there anything that disappointed you?
None in particular. Satisfied.
Other items that would be helpful
Installation Point or hang
Tightening the Tie Wrap is the final step after the Fork is reinstalled and secured. If you use the Tie Wrap to secure it before that, you will have a hard time. Like me.
View detail
The feeling of being absorbed by the gloves
It's been on sale for a long time.
You can hold the Handlebar lightly as the fingertip side of the Glove feels like it is sucking on the Glove.
The design is simple and I love it.
View detail
Replacement from Jita
I bought a new one because the Race Grip made by Zita was deteriorated. the Race Grip seemed to be sold as a double layer structure, but the outer layer was torn soon and the inner rubber came out. This Pro grip is Single Body structure, so I don't have to worry about it.
I haven't used it yet on the OffRoad course since the replacement, but it feels good in my grip.
And the color, Color made by Zita.:Pro grip's Black is more comfortable than Gray.
View detail
Comfortable grip
The handlebar has a pliable grip that absorbs into the gloves and allows you to grip the handlebar with light pressure. It's a great way to relax your shoulders and get the most out of your riding.
For gluing to the Handlebar, we recommend Konishi's Ultra Versatile Premium.
View detail
Overwhelming Grip
[How is it used?
I'm playing Enduro and playing with it.
I ride a lot in Sitting and I always reupholster with this Seat cover to keep my body from falling behind.
I bought it again because I replaced my car this time.
Was the one you received as per Image?
This is my third time so I received something familiar.
Was the installation difficult?
One of the features of this Seat cover is that it is easy to apply.
Anyway, it stretches well.
How was your experience with it?
It's probably the most grippy Seat cover without Rib.
Your body will no longer lag and it will be easier.
[Included Parts:were they on?
Nothing in particular, although the Off-road system has a Large Body Sticker in it.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is hang to put it while pulling it as if it were this.
View detail
Dress-up the hand of WR250R
I chose Red color Grip for WR250R because I installed Red color Hand guard on it.
I wouldn't expect the texture to be durable, though, and it's going to show dirt.
I like the Design and feel that it is very much into the Sporty Image body.
View detail
Sounds good!
I had to replace my old Grip because it was getting too beat up and the Handlebar was starting to show.
I went with the Waffle type because I use it for Off-roadMain.
The Image is a little beat up because I've used it quite a bit in Race and practice, but it's still a very usable Image.
Grip is good and does not slip in a little dust and mud.
I love the way it feels in my hand because of the soft Rubber.
It's a Waffle type so you don't have to grip it tightly or feel like your hand is about to leave the Grip, so you can open the Axel with confidence!
View detail
Fits: SUZUKI Universal
ADDRESS Grip for V100 Φ19Handlebar
I bought this as a replacement for my Nomar Grip because the rubber felt thin and I sometimes felt pain in my hands when I rode for a long time.
I have used another Grip made by the same company, Pro grip, and I liked the feeling of the product at that time, so I chose the Type which can be used for ADDRESS V100.
The STD Handlebar for the ADDRESS V100 has a thin LeftGrip of Φ19, so be careful to check the Grip mounting area of the Handlebar before buying or you will end up buying the wrong size.
The grip is thick and soft, and the vibration that returns to the hand is small and comfortable to use.
View detail
The price and performance are both very good.
This is a replacement for Normal grip.
The price is low in the famous Grip, and I thought how it was because it is not Gel grip, but I am very satisfied with the operability of the difference of the cloud from Normal grip when I exchange it.
If you're a Main Street rider, I think you'll be pretty happy with it.
If you have a lot of long distance touring, Gel grip may be better, but if not, I think you can be satisfied with Standard rubber at all.
The Normal grip of the Large body is not slippery, but the feeling was not always comfortable when lever operation, but
When I switched to this product, it fit in my palm moistly and did not slip at all even if I did not grip it with effort, it was just like Pro grip.
It is very easy to operate Axel and Clutch.
It's even more fun to ride and operate the Motorcycle.
This is a very good product in terms of price and performance.
View detail
Carefully select the mounting position.
This is a Grip that people like and dislike.
It is not suitable for Off-road motorcycle which is sitting and standing repeatedly.
Even on the road, the best mounting position for the Grip is at the Pinpoint, so it should be mounted carefully.
Once I settled on the best position, it was like pushing Throttle with the palm of my hand, which was easy on highways.
View detail
For cloudy or rainy days
Don't consider buying this for sunny days.
[Color] My eyes hurt as much as they did with Clear.
On the other hand, we had good visibility on cloudy and rainy days.
Even if it's cloudy. [Color] Clear is a good choice for people whose eyes hurt after a day of running.
Best of all, it's cheap!
View detail
Total coordinate
I bought this Grip to match the body color of my CT110 HUNTER CUB and other Anodized parts. I'm sure you'll be happy with the results. View detail
Vibration reduction, love the look.
Recommended for motorcycles with a lot of vibration, it is quite easy.
And I'm glad that this 115mm is just fit for my motorcycle.
(I don't want to give away the type of car because I don't think anyone knows it, 115cc)
I'm not sure if it's the same for the current one, but I'm sure it's the same for the new one.
Of course, it's not as disposable as it sounds, and it's an OEM ratio, so it's totally worth the cost.
View detail
In addition to replacing the Handlebar
The grip of the MONKEY125 is good even with NORMAL, but it is also troublesome to reuse the grip when replacing the Handlebar, so it is replaced here.
There is no bad reason for the Pro grip and Domino of the here which has an established reputation for grip comfort.
It absorbs vibrations just fine, and the Design is good.
View detail