Reviews
Easy to grip
Purchased and installed with KITACOConvenienceParts item number:0900-969-00220.
The grip feels like it is one size thicker and very Fit.
I like the thin Grip." If you are a person who is not a good fit, perhaps you are not a good fit.
I like a thicker Grip, so it was exactly the grip I was looking for.
View detail
Replacing the Grip of YZF-R6'08
[How is it used?
We have been sticking with OEMGrip since 2008, but finally the Touch has changed over time, so we replaced it with this product.
Was the one you received as per Image?
Vibration absorbing Gel construction makes it softer than expected.
The design is high and looks good, but there are few black rubber parts and many exposed internal parts, so durability is a concern.
Dirt may accumulate in the Blue area.
Was the installation difficult?
The inner layer is Blue, and I am afraid that it might separate if the Grip bond arrives firmly because of its double structure.
Grip also has the caliber written on it, which is easy to understand, but Quantity:Pair (for Left and Right) Size is different, so be careful not to make a mistake.
◎Axel Side 25×120mm/◎Clutch Side22×120mm
How was your experience with it?
It is soft and will certainly reduce vibration.
I would like to use it for long distances and for high speed cruising, where I can easily feel the vibration, because I haven't yet.
I am hoping for this because I have had my hands numb from vibration when touring long distances with OEMGrip.
I feel that it is soft and easy to grip.
[Included Parts:were they on?
Included Parts:No design document, but there are a few notes on the back of the Package.
Manufacturer would be nice if Grip bond was also included for one time, though.
[Was there anything that disappointed you?
The Axel side was too difficult to get into, and there was a part that was screwed in too hard with too much force, resulting in damage.
I think it's a matter of how to do it, so if it doesn't work, I'll buy another one and replace it, but I'd like to get a little better at replacing grips.
Is there a hang? Interpreted only as a consumable.
Point and hang of installation
This time, when I removed the OEM, I inserted a Ball pointHexagonal Wrench, sprayed Parts cleaner inside, and removed it with a gritty Slide.
After removing the OEM, the exposed parts are cleaned with Parts Cleaner and the old Grip Bond is removed thoroughly. After that, new grips are installed.
Grip bond is a special product for DAYTONAGarage's quake-resistant gels. (Product number:93129) However, it was unexpectedly sticky, so it would be better to adjust the amount of bond while observing the situation.
We still do not know the correct answer.
The Axel side in particular was Large strange.
On my vehicle, in combination with the Bar End in use, the OEMGrip used Spacer on both Sides for the Bar End, but when I replaced it with this product, the Axel side is Exactly without Spacer in length. Is it somewhat short? Or did it go all the way to the back?
The Clutch Side uses Spacer as is.
View detail
It is easy to use
I was looking for a Simple Grip and I found it. The price is cheap and it is a Recommendation! View detail
Reasonable, Grip feel so good!
Grip feels good without slipping 。 The price is reasonable and satisfactory. View detail
Repeat Buy
Replaced because it was ripped.
When I grip it, it feels like it sucks and feels right. That's all I need anymore.
The short overall length is also GOOD
View detail
Focus on appearance
It is a little difficult to fit the Axel side, but it is with aluminum ring, so it makes sense. Looks perfect. View detail
It's neither good nor bad
Well, a common and ordinary Tank Pad.
I was wondering if it was a pachimon? I was not sure about the quality of the product, but I decided to go with this one because it seems to be of delicate quality.
I don't have anything special to say about it, but it seems to be durable.
View detail
For forest roads and the like.
It is much softer. It seems to wear out quickly.
I was looking for a cheap product with half waffle and this is what I found.
View detail
Fits: SUZUKI Universal, SUZUKI Universal
comfortable grip
This PRO GRIP grip cover is much easier to use than the original one. The Italian quality is good in anti-skid, soft and comfortable, high in appearance, and the quality is great. The original one is too hard and not good in slip resistance. I think it is better than domino in terms of workmanship. A lot, nothing superfluous glitches. Next, let's see how the durability is, very satisfied with a shopping. The webike express delivery is very good, and it arrived in three days. -------------------------------------------------- -------- This Pro GRIP grip set is much better than the original. Italian quality is good and slippery, soft and comfortable, high value, great quality, the original is too hard and not slippery. Many, there are no extra burrs. Let's take a look at the durability, a very satisfied shopping. Webike Express is very powerful, and it will be in three days. Powered by Google Translator View detail
Tight feeling
[How is it used?
Replaced along with Handlebar replacement.
Was the one you received as per Image?
There is no such thing as a Gel to prevent vibration, it is Tight.
Was the installation difficult?
Grip exchange is possible if it can be done.
How was your experience with it?
No problem!
[Included Parts:were they on?
Nothing in particular!
[Was there anything that disappointed you?
Nothing in particular!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
First-class workmanship feels great
The express delivery is very good, and it arrived in three days. This one is much easier to use than the original one. Italian quality is good in anti-skid, soft and comfortable, high in appearance, and the quality is great. The original one is too hard and not good enough in anti-slip. In terms of workmanship, I think it is much better than domino, and there is nothing redundant. glitches. Next, let's see how the durability is, very satisfied with a shopping. -------------------------------------------------- -------- The express delivery is very powerful, and it will be in three days. This is much more useful than the original. Italian quality is good and smooth, soft and comfortable, high value, great quality, the original is too hard and the non -slip properties are not good enough. I think it is much better than Domino. Bond. Let's take a look at the durability, a very satisfied shopping. Powered by Google Translator View detail
Defective item
Upon arrival and inspection, there were several cracks on the valley side of the bellows, which were not penetrating, and the boots were bent unnaturally. Compared to the other side, which was normal, it was clearly defective. So I wanted to return it and was glad that they inspected it and sent me a normal one.
The only thing is that the manufacturer's response was that it was inevitable due to the manufacturing process of the product, but that's not true. The other side is straight and has no cracks, so the product is made in Italy by Pro grip, but the product management is the same as that of Chinese counterfeit Level products. I think I should request Pro grip to improve the product.
The return process was easy to understand as all I had to do was enter the necessary information on the site's dedicated page, take a picture, and send it in.
I wanted a normal Fork Boots like OEM, so I bought it, but it was SiliconMaterial and slightly brighter Blue. I thought they looked OEM-like in the picture and bought them, but they ended up being Silicon material, so I wished they would make normal Fork Boots with a decent manufacturer.
Durability etc. is unknown since it has just been installed.
View detail
for Off-RoadSeat
[How is it used?
Seat was damaged and I purchased it as a Replace.
I initially purchased one from another manufacturer, but the material did not stretch and was difficult to install, and the product seemed unsuitable for off-road use, so I repurchased this one.
Was the one you received as per Image?
I purchased the Small size.
I think it is generally as shown in the picture.
Was the installation difficult?
It took some time, but it was easy to put on compared to my previous purchase.
Tucker will be required.
How was your experience with it?
I have not done any off-road driving yet, but the gripping force seems to be very high and the performance seems to be perfect.
[Included Parts:were they on?
WaterproofSeatetc. is not included, so I diverted it from another product and used it, but I think Large is sturdy without it.
[Was there anything that disappointed you?
There was not much.
View detail
Good cosmetics, good Fit feeling
[How is it used?
Commuter Vehicles, Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
No problem, good with Wiring groove.
How was your experience with it?
Fit on the palm and hangs well on the finger side
[Included Parts:were they on?
Sticker is attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Recommendation to the Inch bar.
Used on 04MODEL XL1200C SPORTSTER 1200R.
Inch size setting.
I wanted a Standard Rubber Grip.
I bought it for vibration countermeasures by quake-proof gels, etc.
I like the grip and look better than the plain NORMAL grips, and the
I think the Plating cap on the end is a good Accent.
I have not seen many reviewsetc. but I think it is a good product.
View detail
Easy to use
I am satisfied with the grip and it grips well. View detail
Less durable, but more comfortable to grip! Effective in reducing fatigue!
I installed this Grip again as before.
It is not very durable (it is soft rubber and will crack within a few years of installation even with Motorcycle Cover and no UV exposure), but it is very comfortable to grip, reduces fatigue, and the Design is cool.
It is the best Grip for Motorcycle for touring.
View detail
Processing Required
After replacing the handlebar with Other Brand Product, we put on the grip, but the grip was 7mm too long and the hand guard could not be attached, so we cut the end and adjusted it.
I don't think it would have been necessary to cut it if it were an OEM Handlebar.
Light-colored areas will show Black stains after use.
View detail
Even my muddy butt in Muddy won't slip!
Normal seat of CRF125F is suitable for muddy driving such as Enduro.
I was concerned that it would slip easily.
I consulted with a friend who rides the same type of car, and immediately this Seat cover
He told me about it, so I bought it and installed it.
Grip has been outstanding, and Large was right to reupholster it!
It is very comfortable to use, even with my butt covered in mud during the Muddy Race.
Riding is easy.
If you want, there should be a color range that matches the body color and the manufacturer color.
I thought it was good.
View detail
Variety and Coloring
Personally, I think it is one of the most standard items in MotorcycleCustom.
Most of the Motorcycles I have bought have come with this Manufacturer's Pro grip.
The installation was also done by Cutter and Cutter for OEM.
Screw this guy into the bar and you're done.
No adhesive is needed because the Size feeling is already quite Tight when installing.
It is slightly thicker and softer than the OEM's flimsy Rubber
Vibration will be somewhat better than OEM, I think.
But it is safe to say that you should not expect too much.
If you want to improve arm numbness during long-distance touring
This is because it is much more effective to improve the way we ride and take breaks.
View detail