Reviews
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA
You were right to buy it!
I purchased this product to install ETCBody inside Cowl. I was able to install it in my KATANA without any modification. I am very satisfied! View detail
Good Bracket.
I used it to install the ETC Sensor in the Cowl. That's a handy Bracket! View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI GSX750S Katana
It would be quite good to Replace LeftHandlebarSwitch.
The LeftHandlebarSwitch was broken (contact failure due to deterioration), so I considered replacing it and purchased this product. It took some time. Both functionality and operability are good, with no particular problems. In my case, I had already replaced the Relay with the LEDBlinker, so I was able to use the Hazard lamp function without any problems after replacing the Switch. I wish the price was a little lower, but it can't be helped. View detail
It lives up to its reputation!
This is my impression after driving about 100km with it installed.
The wheel idle at the front up while parking is totally different. Before the replacement, the pad that was rubbing must have been in the way.
I can hear the sound of the Pad dancing with BrakeRelease of the push walk.
I could not feel the difference during driving unless I was very careful. The initial bite is smoother now.
When I released the car from a cornering position, the braking was released smoothly and it was an interesting sensation.
A simple part like this can change a lot.
View detail
Cool
I think it's also the cheapest price you can find.
The texture is good.
Hard.
The operation is also very smooth.
It looks a little large.
that extent
It's magnificent.
Cool
View detail
slightly expensive
It's pitch black.
Cool
If you don't mind the color.
I have something a little cheaper.
I bought it anyway.
Great texture.
Easy to operate.
Clutch is light
View detail
It's so light! It feels like a 250?
The instruction manual is also easy to read in color, and the product body is made by KOUKEN, so the finish is good and the accuracy is preeminent.
It was easy to install, and I was surprised that the Clutch was lighter than I expected.
If you are worried that your KATANA Clutch is too heavy, this is the product for you.
It's just a shame it doesn't come with a Mirror Holder.
View detail
The texture and design are both excellent!
It was introduced at the same time as the LightClutch holder in March of last year.
It is Large satisfactory in terms of rigidity, texture, and design if I compare it with the original OEM, though I did not compare it with the other company's product.
I should have made the brake holder here too...
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI GSX750S Katana
Large Good
Since the feeling of use of the Normal switch is not good, I purchased this switch It is a part adopted from GSX1300R HAYABUSA08MODEL, but for KATANA It's nice to be able to pimp it out because of the wiring process View detail
New ModelThis is a product I want to recommend to all Katana riders!
I'm a bit of an asshole before I bought the Design, and the License Plate looks heavy at first glance I couldn't forgive Bracket
I bought this product
As far as installation is concerned, it's easy to install if you're familiar with it, but it's a little difficult for the uninitiated Impressions Especially the installation of Screw and Washer and the Screw and Washer that had a little difficulty in removing Stop-lamp I was slightly lost in the
It feels great to use, to say the least! And look OEM? It is so good that I think that it is comfortable, and above all, it is an Accessory CaseSpace under Seat The old OEM Tools SetLevel can do a lot of the paperwork as well as the automotive tools It's easy to put in In addition, you can put in the net to secure the luggage, and there is still some room to spare You can open and close the lid by hand with a screw (used to make a request or demand) won't work 。 The FRP is also made of solid material, so there is no need to worry about its strength
I'd like to see a Painted Spec. in the same color as the OEM one Also, if you can make a Fender Eliminator Kit that fits this product, please do so I'm glad to hear it Also, the Stop-lamp Extension Harness was sold separately I wish it had been mentioned in the description of this product as well
Personally, I'm very satisfied with the ease of use, more than I expected, so it may seem pricey, but I would recommend it to everyone as I think it will be more useful than the price
View detail
That's pretty good!
It is not via Mr. Webike, but it is a shop in conjunction with FCC Clutch Kit in the spring of last year It has been fitted to the
It is often said that Nanahan Katana has a heavy Clutch, but my car is a little I didn't think it was that hard because of the fact that I included the Release of Long But..
It was highly praised on the blog of Mr. RY of Takarazuka, and I wondered if it was fifty elbows instead of fifty shoulders When we consulted with you because the Left arm had become painful at the Black version of the accidental We were lucky to ask for this as we happened to have it in stock and had time to work on it
It's a great way to cut off your Paris and connect with it
Gear changing has become lighter and Neutral at the time of stoppage comes out easily
The Lever operation is also tightly controlled and comfortable
However, since Lever's Stroke increases, the Clutch feels a bit distant until you get used to it I suppose You may not like it here
If you're considering buying one, you'd better check the Lever ratio
View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA
Just fit!
I got it 3 years ago as a direct purchase without going through Webike (sorry)
I've heard that there are a lot of individual differences in the KATANA (I've known other motorcycles for the past 30 years) There are some people who had a hard time with it, but my individual seems to have had It fit perfectly and neatly
I bought this one along with SensorBracket, thinking I might use it at some point, but this one is not I still haven't been able to play an active role
But the texture is good and the rigidity is sufficient, so I'm happy with it
They will be sleeping in the Cowl until the day we plan to increase the light intensity
View detail
It's OHNO SPEED for KATANA
I didn't go through Webike and got it directly from him (sorry)
Surface in the space under the Visor of the Cowl with ETC installation in other shops I had an Antennas installed on my Fastener but relocated it with this product There may be other similar products out there, but I prefer to use OHNO SPEED's for peace of mind
View detail
Fits: SUZUKI GSX1000S, SUZUKI GSX1100S
OHNO SPEED for your peace of mind
OHNO SPEED's products have always helped me, but the Clutch CableWire is the first time I've used it I'm grateful for the Large weirdness of getting old Motorcycle supplies at a reasonable price! Hey
However, others have commented on this 'Plenty of PTFEGel' I was also expecting to see the same thing, but it didn't seem to be injected... OHNO SPEED's website for guidance I guess the Spec. has changed a little bit because that phrase was missing from the I wanted to use it right away, so I sprayed in Teflon Lub of RK that I had on hand and installed it I did
View detail
Weight of the Clutch is reduced by about 40%
I got to know this product on SNS, and I called the president of OhnoSpeed and asked him about the effect directly
I am grateful for the president who is very enthusiastic about Katana, old and new, and was eager to consult with me
I have arthritis in the base of my left thumb, but the Normal clutch is too heavy and I can't get through traffic and the It used to be a pain to run long distances, but after installing this product, the weight has been reduced by about 40% Clutch operation is now a breeze
It is well made and has a wide range of adjustments with no wobble, and will be a great fit for many people!
There are two types of this product, and it will be used for Master Cylinder of Brake in the future if you want to replace the brembo with a brembo, the holder part is the NORMAL color:I chose the Gray one
If you're like me and don't plan on replacing your brake master cylinder, you can use Holder You can choose a limited edition Black with a Black part
Spare lever is priced at 6,000 yen (excluding tax and shipping)
I highly recommend this product to people who are considering their first customization of the New Model Katana You can
View detail
Lightness Satisfaction
The OEM Clutch is very hard, and it's too much to hold the Clutch lever, not only for city driving but also for city driving I found this product when I was in the market Ohno Speed's exploration of KATANA is great from the User's perspective It is a product of no doubt, recommended View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
I forgot to attach a picture
I forgot to attach an image, so I'm posting again
The president of Ono Speed made each one by hand
These are tasteful parts, including the care in welding and other aspects of the process
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Polite
No complaints, very good
It may be a bit of a favorite, but it's well made and simple parenthesis Good
Large gauge that can hold 500 plastic bottles (Quantity:I tried to get 2pc in It seemed to fit more :) I was able to secure the "Parenthesis" and the appearance is good
Above all, the fact that it was designed to be able to accommodate individual differences in the body of the car is surprisingly white
Unlike the ones made overseas, Bolt On
It's amazing, and I was very impressed with Japan's craftsmanship
Although the Rear Sets made by Ono Speed was used in the car for Circuit before, it was not used in the car for Circuit The play is too loose for public road vehicles, but it is necessary for Circuit
If you react by carelessly touching Brake, you will fall over immediately
Conditions that can cause the unthinkable to happen, such as shifting weight near your limits during exercise In
It was Rear Sets, a concept that is only needed in such situations
This Fender Eliminator Kit has nothing to do with marginal driving, but it's a bit of a I thought it was a product with unexpected attention to detail in places
View detail
It might be good for KATANA!
Attachment is necessary for fixing Bolt below!
Because I hit the inside I thought that I missed that much but I bought it
Chart price with Attachment will change about 10,000 yen
I stopped only the top two and did not stop down I think that the difference of 10,000 yen was good even that
If you want someone who is worried if you want this Cover
With Bolt stop two people to buy for KATANA is alike?
It seems that Attachment's Single Item sale is not done
We will Recommendation to buy things later thoughts
As for installation only Bolt 3 + 1 exchange, so it does not need a large technology
View detail
This is a good part.
bremboCasting, opposed 4 pods, 1 pcPin Caliper. Originally it is to prevent Pad from returning when Wheel in Race is exchanged during Race and to prevent the occurrence of time loss, but since Tension is applied in the direction that Pad opens from this shape, Pad separation is very good Then, unpleasant drag was solved. In addition, it reacts to Linear even for subtle input at the beginning of Brake's hand grip, making Brake operation fun. Pretty Recommendation. View detail