Reviews
It makes a big difference whether it is there or not, and even though it is a small part, it makes a better parenthesis.
It looks like it might float a bit without painting.
Large is durable because even I, a beginner, managed to get it wet.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750E, SUZUKI GSX1100E, SUZUKI gsx1100s katana (sword), SUZUKI gsx1000s katana (sword), SUZUKI GSX750E, SUZUKI GSX1100E, SUZUKI gsx1100s katana (sword), SUZUKI gsx1000s katana (sword)
No. 1, No. 4, No. 2, No. 3 intake manifolds connected for Hose conversion (No. 2)
[How is it used?
It is used as a Nipple for connecting Nos. 1 and 4 and 2 and 3 in-manifolds.
The one we have been using is a Honda OEM with an outer diameter of 4mm.
The Nipple was broken by an unintentional tightening, so we replaced it with this Nipple that we had prepared in advance.
Was the one you received as per Image?
Satisfied with the modeling. Satisfied with the texture. I am satisfied with the texture.
Was the installation difficult?
Large sturdy if you have access to a reasonable amount of tools.
Both HondaOEM and this product are made of relatively brittle Brass.
We were careful not to over-tighten the screws, as we had a track record of breaking them.
How was your experience with it?
I was just playing with the idea that it would be fun to feel the chamber effect by widening the inside diameter of the hose from 4mm to 6mm. I was just having fun with it...but I couldn't feel the chamber effect with such a small change.
View detail
The quality is solid and sturdy.
We started using the system in April 2017 and have been using it for 6.5 years.
I am only a little concerned about retrofitted parts, so I inspect them only occasionally on the side of something.
Obviously, ・・・・ no problem. I will ask them to keep up the good work.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
I bought it and it was a mistake!
SEA BASS OEM parts are sold as diverted parts. band is too long to fix KATANA tool bag + small things, so it can't be used at all! View detail
BrakeTouch has changed.
Effect of original use
Facilitate Pad replacement with Race, etc.
Purchased with the expectation of a different effect than
(Expectations)
Improvement of drag
BrakeTouch improvements
I've driven about 300 km since I installed it.
It's hard to describe in words.
The change was definitely felt.
If I had to describe it, I would say the ease of initial Touch Control.
Stress is reduced.
It has been a pleasure to Braque.
I didn't notice any difference in the drag.
View detail
Fits: SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1, SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1
Reprint edition
I am very grateful to be able to purchase a new one for my tiller Handlebar. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
Reprint edition
I am very grateful to be able to purchase a new one for my tiller Handlebar. View detail
perfectly (suited)
It was perfect without cutting into front cowl. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
You must be relieved.
We specialize in KATANA.
You must be relieved.
The Reinforced Clutch made it much heavier.
Seems to be a little lighter.
It has the same shape as the OEM.
No discomfort.
The price is also better than a certain unicorn store.
I think it was somewhat cheaper.
View detail
Large satisfaction with the effect.
I bought it because I couldn't stand the Normal clutch which is so heavy that it makes me cry.
The effect is immensely Large. It is dramatically lighter.
There are some reviews that say that the Lever pulls back more or that the Lever position is farther away.
To me, I could not feel any difference from OEM other than the weight.
I wonder if this area is a personal difference, such as the larargeness of the hand, sensation, and familiarity.
The texture and precision are high, and the appearance is Cool.
I thought the price of less than 50,000 yen including Mirror Holder was expensive, but considering the effect, I was satisfied.
Also, the OEM Mirror Holder cannot be used because the Bolt hole is slightly gapped.
The Mirror Holder, sold separately, is 5mm higher than OEM, so the Quantity:Pair (for Left and Right) A 5mm collar was placed on the RightMirror to take the balance of the
View detail
It would be very helpful if it were available.
I bought it because it was cracked. I believe OEM was discontinued... View detail
Fits: SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2
As Repair Parts Stock
OEM Product has been discontinued for a long time, so I bought it as Repair Parts Stock for a long time. View detail
Fits: SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS
As Repair Parts Stock
I like the fact that the material is Stainless Steel, but I would have liked to have purchased it with Black paint like the OEM. View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
ScreenGrommet is a consumable product.
I bought it because my ScreenGrommet was getting worn out, and it's good to replace it before the Screen gets a Crack! View detail
Fits: SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1, SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1
This is a must-have item for installing a tiller handlebar.
I bought it because I ride it with Handlebar, a tiller, depending on my mood. View detail
Fits: SUZUKI GSX1000SZ-SD, SUZUKI GSX1100SZ-SSL, SUZUKI GSX750S1
The finish is beautiful!
Even if there is no rust on the inner tube, the plating on the part where the oil seal hits the inner tube will become thinner every time it is stroked. I replaced the inner tube with a fresh front fork. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
This is a must-have item for installing a tiller handlebar.
I bought it because I ride it with Handlebar, a tiller, depending on my mood. View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1000s katana (sword), SUZUKI GSX1100 SR, SUZUKI GSX1100 SR
Good Parts!
I bought it to install YOSHIMURATemp meter, I didn't want to stick the temp meter directly on the Top Bridge, so I'm glad I did. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Cell MotorHarness
Harness replacement for old cars is basic. Installation is not so difficult. View detail
Fits: SUZUKI GSX1100SY, SUZUKI GSX1100SD-SY, SUZUKI GSX1100SD, SUZUKI GSX750S2, SUZUKI GSX1000SD
It's a good luck charm for KATANA.
First of all, the texture and construction are excellent. It is a must-have for KATANA! Two people are recommended for installation. It is a well-made Slider! View detail