Reviews
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
It is a super Recommendation. Super convenient.
Underbone Frame cover for CT110 HUNTER CUB (where you straddle when you ride) is considerably wider and flatter than the SUPER CUB, and you will be tempted to load it with luggage! (Lol) So, I was thinking of installing a CenterCarrier, the so-called Vietnam Carrier. Although none of them seemed to fit the bill, I had narrowed down my choices and was about to order one when I saw this CenterBasket that a YouTuber had installed on his CT110 HUNTER CUB, "That's it! I was so peeved that I sought it out and bought it.
When you use it, it is super convenient! A little shoulder bag (8LiterSize in photo) Of course, if you hang the attached Small TypeNet on the top surface, you can put a PETBottle or something in it and it will not fly out. If it is just a CenterCarrier, you have to fix it with Net or Rubber string, but with Basket, you can put it in and it will not fly out. (Place) Only. This convenience is addictive.
The only drawback is that I will not be able to straddle the Underbone, but I originally straddle the Rear cargo bed like a normal two-wheeler, so it is not a MinusPoint for me.
Also, I am putting a twist on this Basket by placing the Helmet on it, so the Frame (Made of iron) The top surface of the helmet is covered with double-sided tape and cut to a suitable large size and attached to the top surface of the helmet to prevent scratches on the helmet.
View detail
countermeasure against standing up
Installation is easy
I expect that Damage at the time of the fall will be limited to the smallest limit.
View detail
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
comfortable tank pad
About quality and texture : very comfortable and soft About the feeling of use : increases our grip during rides Products to buy together : none Difficulty of installation : very easy, just remove stickers and stick to tank Cost performance and comparison with other products : higher price due to good quality About shipping and packaging : neatly packaged, fast shipping Any concerns, cautions, or advice when purchasing : clean the tank surface before apply tank pad View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
Thanks to the inventor!
[How is it used?
2.Purchased to put a 2.3Meter Motorcycle in a 5Meter wide place.
I mean, if it weren't for this kind of product, I might have abandoned the purchase of Motorcycle...
Was the one you received as per Image?
It was as strong and well made as the Image.
How was your experience with it?
It can smoothly move a 260Kg motorcycle and is a satisfactory product.
[Points to note]
Quantity on front wheel:If you want to set and move the device, you cannot make it Smooth until you learn the hang.
Adjust the direction of the front wheels so that both rollers of the Motorcycle Mover are grounded and can turn Smoothly.
Other items that would be helpful
Depending on the shape of the Side Stand, the orientation of the Stand Mover may not be stable.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Reduced heat in the thigh area
The W800 has a Bevel Gear Cover that gets very hot in the summer, but this part makes it slightly better.
Installation is easy
However, the price seems too high, even for Carbon.
View detail
The best item to protect your muffler
In Korea, full exhaust muffler structure changes are no longer possible.
As a result, the 4-shot muffler of my cb1100ex became rare.
This is the only item that can protect an expensive muffler in case of a fall.
The product photo looks like rubber, but it's made of hard aluminum so it doesn't break easily. -------------------------------------------------- -------- In Korea, it is not possible to change the full exhaust muffler structure. As a result, the four -foot mufflers of my CB1100EX have a scarcity. It is the only item that can protect expensive mufflers in all cities. The product photo came out like a rubber, but it is hard aluminum, so it doesn't break easily. Powered by Google Translator
View detail
Stylish Carrier
[How is it used?
This Carrier was introduced for the installation of a Rear box for Touring.
Was the one you received as per Image?
Since the steel bars used are rather thin, it looks slender at first glance, but the structure is well thought out, so I think the robustness is not a problem.
Was the installation difficult?
The four bolts on both sides of the tail cowl are removed and attached with the special bolts that come with the Carrier, but this time, the Multi Saddle Bag Support of the same manufacturer is used. (Item number:wca-11-duke) The Multi Saddle Bag Support itself can be used in place of the Spacers. The Bolt was installed using screw lock fluid, in case it loosens due to vibration. The bolt was installed using Screw lock fluid to prevent the bolt from loosening due to vibration.
How was your experience with it?
I have not installed the rear box yet, so I don't know how it feels in detail, but it is convenient because I can grab the Carrier and move it around the vehicle body when I need to maneuver it. Also, it does not shake even if I support the car body by grabbing only the Carrier. Also, there is no difference between the top of the Rear Sets and the Carrier, so it seems to be very easy to use.
[Included Parts:were they on?
Four Bolts and four Spacers are included.
[Was there anything that disappointed you?
I have no complaints about the product itself, but it would have been better if it had a projection for the Loader Hook. Also, I would like to see at least an Instruction Manual attached to the product. It is a simple structure, so it is possible to install it without the Instruction Manual.
Other items that would be helpful
The instruction manual is not included in the package, but a note of caution is included to ensure disclaimer and protection on the part of the manufacturer.
Items to buy together:Screw lock fluid
Opinions and requests to the manufacturer:Please give priority to user-friendliness and include the Instruction Manual in the package, rather than protecting the manufacturer's interests.
View detail
Wind screen
It can be mounted on the 2023 Honda CRF300L. The quality of the product is good, and it has the effect of being a genuine product. I'm satisfied with the fast delivery. View detail
I put it on for the winter cold.
CROSSCUB110 for winter cold (JA60) I put it on the
The product is so good that I don't feel the wind while driving with the LargeGuard.
Minus points for some people.
It will be tough for those who do not have the proper tools to tighten the Bolt that attaches the Guard to the Bracket. (Manufacturers do not recommend that amateurs install them themselves in the first place.)
I have no problem with this, because I don't do it myself. I don't do it myself, and if someone yells at me, I just bail and return the yay, so no problem.
It is recommended for those who want to protect themselves from the cold as Total!
View detail
Vehicle body stability
The hold of the tank has been improved and the stability of the car body has increased. View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
Pretty good
Purchased to make effective use of the GIVI box, I installed it on the UniversalBase plate of Mono-lock and used it!
It can hold even small Rear Sets like Z250 very well.
I am also satisfied with the hold of the attached Belt.
View detail
Exactly?
I installed this on a WorldWalk Dax125 OEM color Rear box. It is expected that the Wound will not stick to the Helmetetc. that is put inside. Just be careful with the Velcro as it can get caught. View detail
GIVI E470 and CinderellaFit!
Anyway, it is cosmetic! That's all there is to it.
Box of GIVI in my case E470. The WorldWalk Inner was installed on the
I arrived here with a lot of information, and I would like to send my admiration to our predecessors for their TRY.
Without innerwear, boxes gradually rub against each other, and then sand and other substances accumulate and rub directly against the luggage, causing damage to both sides again.
I used to use a non-slip sheet or something like that, but I switched to a GIVI E470 when I switched to a motorcycle, so I went through various searches and found this product.
*Use for 48Liter
The cost performance is the best. Above all, the cost performance.
It is not a perfect fit, but it can be used without any problems. It is not necessary to use all of the Magic tape provided.
I think it works well enough with just a Point in a good spot. I used all of them without thinking and somehow regretted it.
Motorcycles are subject to a lot of vibration, which can ruin luggage and cause scratches and scuffs, so it is better to have a protective inner like this.
This product is made of Black fabric and SpongeUrethane on the back side, and can be washed by putting it in Net.
However, as I imagine, urethane sponge should gradually deteriorate, so I think it would be better to replace it as soon as it deteriorates.
It will hydrolyze and fall apart....
View detail
Cute Up
I was torn between a black box from GIVI and a black box from GIVI, but I chose the cuteness. View detail
Luxury!
Grom (JC92) I installed it in
The area is large, and protection can be expected to be quite good.
The surface is painted, so it does not have the cheap look of the Plastic ground.
Installation is also easy, as it is simply attached at the same time as Mirror.
Design has also been MATCHed and looks pretty good.
View detail
Satisfied
About quality and texture->The screen can be attached and detached quickly and easily, so it can be use as needed. About the feeling of use->fits very well
Difficulty of installation->very easy to install Cost performance and comparison with other products->The price is reasonable compared to other products
About shipping and packaging->Shipping was fast and packaged carefully.
Any concerns, cautions, or advice when purchasing->Satisfied so much installed on CB1100EX. It fits very well. The quick-release bolt design allows you to attach and detach very quickly, so you can go without a screen and quickly install and leave on tour ------------------------- --------------------------------- Installed in CB1100EX. It fits very well. QuickLee's type bolt design allows you to remove it very quickly, so you can install it quickly during the tour. Powered by Google Translator
View detail