Reviews
It's a good product
This product protects the muffler. But it seems impossible to protect it completely. If you drive at high speed, the protective device may break depending on the speed. There is a great risk if a broken fragment touches the engine or chain in the secondary accident. Please use this product only at low speed slip or fall in place. View detail
Forbidden Shield
I installed it for wind protection when driving at high speeds.
I don't know how effective it is!
After all, wind pressure tires you out when you drive more than 90 km.
I guess NAKED like SR400 is just right for toddling along in the Left lane at a speed of about 80-90km/h.
The Design is so subtle that I don't think it will disrupt the overall Image.
The details are now harder to wash the car…
View detail
No windproof effect.
The windproof effect in the product description does not exist, given the tightness of the Large.
Refreshing too much around the Front for a Dress-up.
I think it's just right.
View detail
lack of grip (e.g. in tennis)
Purchased for scratch protection and for the Knee grip.
Tank and lower part of the tank and the lower part of the tank, Brass ticking section, 5 itemsQuantity:Set。
Motorcycle purchased without a test ride, so it is in Position.
Purchased this product because of unknown knee position.
Songe thick (visually measured 3-5mm) with a fibrous surface
The texture is soft and soft to the touch.
Grip strength is not high (for jeans)
I still might have preferred a product with a Rubber texture.
It is good for scratch prevention.
View detail
Great product!
Great product! Excellent fit and finish. Easy to install. Instructions in Japanese but you can use Google Lens to translate with your phone. Fits the 2020 USA spec (look at tail light/rear turn signals!) C125 Super Cub very well and even allows you to keep the Honda package rack (if installed). Sits pretty high, but my wife says it does not seem to affect the bike's performance or handling. Easily stores my XXL Shoei Qwest helmet with room to spare. First purchase from Webike, they communicate very well and exceeded my expectations on shipping. I will be purchasing more from Webike. View detail
It may not fit a little in terms of size…
I have a Spec. on W800 and it's hard to install!
I think it doesn't fit a bit in terms of Size.
The Large size of the Light and the curvature of the product just doesn't feel right!
I still use it because I couldn't find any other similar product, but …
If you are concerned about the large windshield, this is a recommendation for you!
Light (Forward) The windproof effect is more than meets the eye because it is attached to the
There is a big difference between having it and not having it at high speeds!
But the Size feeling is not good, and I hope that as a Manufacture, you will verify and rework it!
View detail
revelation
Large is useful for narrow garages. Women need a little practice when starting to use it. It is recommended to use it after practicing in a wide space. View detail
Good stuff.
It has not been in use long, but it has not peeled off or been damaged by rubbing. The adhesive strength is just right and does not damage the paint or seal.
It is easy to Grip to Tank.
It grips with light force and reduces fatigue in the suspension.
View detail
![[for Repair] Exhaust System Guard For Z1000](https://img.webike-cdn.net/catalogue/images/22934/weg-1m-1_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled)
three
The design is nice and solid.
I can recommend the cosmetics.
View detail
You'll get used to it.
Used on MT09, easy to use once you get the hang of it, but the price tag is too high. 10,000 or less is appropriate. View detail
Mechanic installation required
The product is good, but the Instruction Manual says not to do DIY installation, but to have it installed by a mechanic at a motorcycle shop.
In my case, one Bolt was not included, but it states that inquiries can only be made by the mechanic who performed the installation.
As for the installation by myself, I had a bad impression that they didn't know if one Bolt was missing. 。 I'm just talking about the instruction manual.
The product is usually good.
View detail
difficult to install
Very difficult to install.
M6-10Cap screw is not possible.
It hits the Light and scratches it.
The bolt is too short and hard to assemble. you should give up cap screw and use Hexagon Bolt M6-15. you will have to go to Home center to buy it.
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
Nice Cat Protector
Cute tank protector. More fun than normal sporty protectors. Good rubber material. Added some googly-eyes for additional cuteness. CB400SF. View detail
I like that you can change the length.
Mirror mount was the right choice because it is difficult to install Bracket around Handlebar.
The height makes it easy to see your phone.
I was concerned about the fixation force because it moved no matter how hard I squeezed it, but it seems to be Large sturdy for normal driving.
bar to theQuantity:Pair (for Left and Right) It would be nice to be able to change the length by moving it to
View detail
Not as expected
The product fits okay, adhesive and attachment to the fuel tank is firm. However, the grip is not as strong as expected. Legs still slip when going hard into a corner or braking heavily. View detail
What happens over the summer
I used WorldWalk's Tank Pad in my last car for 6 months and 5,000 km and it didn't get crushed, so it's a Repeat.
It will be interesting to see what happens over the summer.
I had complained about how expensive it was in my diary, but it's not that expensive if it comes with the Knee Grip Pad. I'm sorry.
The texture is fuchsia, so the cushioning performance is high, and the adhesion is firm.
I think it is for the uniformity of the large size, but I thought the tank pad should be a little larger.
Design is Orthodox, no complaints.
I am satisfied because it is black and does not seem to fade much. I'm only giving it 4 stars because the weather resistance needs to be verified.
View detail
OEM Color is happy
Large Knuckle guard
OEM Color is happy
It also provides good wind protection.
It is installed using Mirror Screws, but if it is used in conjunction with Windshield, which also uses Mirror Screws, you need to be rather careful.
If you don't tighten it tightly, it might become RoseRose while driving?
View detail
Prevents the silencer's wounds when falling.
It comes out a little longer than the required length. There is a feeling that it definitely blocks the wound, but it is a little annoying. Functionally, it's flawless. View detail
for night use
[How is it used?
Still only short-range OnTwo
Was the one you received as per Image?
Street Image
Was the installation difficult?
Can be installed by anyone with some knowledge
How was your experience with it?
On road it's not a problem, but...
[Included Parts:were they on?
○ Because it didn't have a 10mm Nut in it.
Use a hand-held Nut
○ The ON and OFFSwitch connection terminals need to be changed.
should not
"Others... things I care about."
(It may be necessary to take countermeasures when driving off-road, etc.)
View detail
Not compatible with New ModelW?
I co-mounted Bracket to Headlight to install it on my 2020 W800. However Are we getting to the plating parts?" I tried to match the outer plating parts of the Headlight before the main assembly, but the VisorBody hit me and I could not install the VisorBody.
I spent about 2 hours adjusting the mounting position of the Bracket and Headlight, but the Bracket seemed to be not long enough, and no matter how I tried, I could not install it, so I gave up and put the Visor back without it.
I was relieved to see W800 in the list of compatible models, but I wondered if it would not fit the New Model.
I thought about installing only the Bracket first and then the VisorBody later, but even so, I gave up because I thought it would run into the Plating parts of the Headlight.
I was disappointed that a $5,000 item, though inexpensive, went to the Garbage bin.
View detail