Reviews
It's pretty good!
It is very lightweight and beautifully made, but it needed a color to be installed, probably because of the compatibility with WYVERN Exhaust.
Installation is easy, so even beginners will find Large sturdy.
View detail
Since it stabs and can equip easily only by screwing, it is good. Since appearance becomes a race ish, he is smart. Although he does not want to become hollow, of course, I think that it is effective.
Since it stabs and can equip easily only by screwing, it is good.
Since appearance becomes a race ish, he is smart.
Although he does not want to become hollow, of course, I think that it is effective.
View detail
MechanicalSwitch is built to not malfunction.
My previous Brake from another company broke, so I bought this product which seems to be well made in terms of safety.
It is a comparison with a certain factory-made Switch that was used before.
The 0 factory model comes with a stainless steel brake pivot pin, and the switch itself is a compact brembo.
I liked the Large variant because of its simple and stylish construction that does not destroy the design of the M3Bolt, but the M3Bolt one to BrakePivot!
So, if you run repeatedly, the switch will turn and the brake will stay on.
It happened many times, I over tightened the M3Bolt and distorted and broke the Brake switch and the Plate that holds it.
It was then physically and rationally installed and has been in use for about 6 years.
The newly purchased Switch made by Lady Bird is made to be conspicuous by the thickness and the size of the Switch which is Large, but
There is a stopper that prevents the Switch from malfunctioning, and it is well made, so I was able to install it with peace of mind.
However, it is not possible to install it only with the attached Hex wrench. Separately, 5.5mm Spanner, Wiring, Electric Works Pliers, etc. are necessary.
If you have never made a Wiring before, it may be difficult to install.
Also, since the brake switch is thick, it may interfere with the brake hose depending on the hose routing and may not be able to be installed.
I like the rugged design, but the brake switch is a prominent design, so tastes may vary.
View detail
It's a SMART look.
Changing the Silencer will also change the Silencer Bracket to give it a more custom look.:Aluminum makes it lightweight and buffed, so it looks great and has a SMART finish. View detail
It's better to have it in a heavy vehicle
It has been a while since I installed it in GSX-R1100, and I had a chance to confirm the effect, so I would like to introduce it to you Report
When I fully locked the Handlebar, I couldn't get the half-clutch to work as well as I thought it would I knocked over the Motorcycle
But thanks to this Slider, the invariably scratchy Starter gear cover ( (EngineLeft Side) is intact
The Bumper effect of a sturdy Normal muffler? Together with Tank and Cowl, Tank and Cowl are intact, and it only took a Wound in Mirror!
Mega sports can be accidental when handling it, so this is a great way to get it done It's a relief
Due to the structure of this Slider, if it falls down at a high speed, it will leave the aluminum base and only the plastic part I think the
In a fall on a public road, a too strong Slider can make the accident worse, so a strong impact can break it It must have been designed in such a way
Also, you have to remove the Slider when you install the Cowl, but you can leave the base attached It is easy to work with
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR1000, SUZUKI GSXR1000, SUZUKI TL1000S, SUZUKI SV1000 S 03, SUZUKI SV1000 03
If you don't care about it, just the fact that it has a brembo makes you feel superior
I asked the Shop to install it When I didn't get a hit, I was scared that it was a Brake that didn't work, two and a half I think it will come out around the time Change After all, there is a sense of presence Moreover, it may be the effect double if it is made MASTER of brembo It was View detail
Installation of Right Side was quite Large strange...
Fallen cannibals... After delivering car carelessly I got stuck on Left 3 times and got scratches on the under cowl...
Quantity with bolt on : Pair (for Left and Right) The subframe mounting bolts are pulled out and mounted, but it is quite Large strangles to hold the self-nuts on the Reverse side. Especially the hose of the radiator is in close contact with the subframe, especially the Right Side, and the tool was difficult to enter is (^_^;)
(I removed the mounting screw and shifted the under cowl, I fixed the nut with the Small Monkey but I think that it is easier to exchange the Left Side if you prepared a 14 mm plate spanner)
The appearance is not exactly how it jumps out, it is natural that you do not know that it is worn if you do not look good.
Perhaps, I think the damage to the cowl is difficult because the slider is grounded even if it falls over.
(On the other hand, if you fall down severely, the attachment part of the subframe and the frame will be useless)
View detail
Fits: KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX636, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Decorative elements are strong
I did not want to process Cowl so much, so I made it to MINI. Cowl fixing Bolt is easy to install and remove. But it will change looks and change. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z1000 ZZR1400, KAWASAKI ZX-9R, KAWASAKI ZRX1100
The decorative element is strong
Just screwing into the boss at the rear end of Swingarm, pretty much Race ish. I bought Frame slider at the same time, but VinylPipe is rolled into Screw and politeness is transmitted. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z1000 ZZR1400, KAWASAKI ZX-9R, KAWASAKI ZRX1100
The decorative element is strong
Easy to install, just screw. However, Race ish, it seems quite satisfying. I also like making it solid.. If it is a bit cheaper to say,. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Frankly Parenthesis is nice !!
Attached to ZrX 1100.
I purchased it because I wanted to Refreshing around Rear.
I think that it is a feeling that there is no personality in a common Bracket, I like this shape and it is purchase.
Although I did not have much difficulty in installation, the work went smoothly, but as it is, the Exhaust System and Shock interfere with each other, so I added Rubber Bush between and attached it.
It looks refreshing and I'm satisfied to see Rear shock well.
View detail
Appearance Refreshing Surprisingly sturdy
I was worried about strength by saying Aluminum, but no particular problem.
OEMTandem Footpeg's Exhaust Bracket position and a little gap, but installation can be done without difficulty.
Basically it is satisfactory, but the price is a bit high, so four stars.
View detail
IXILExhaust System
IXILExhaust System's attached Spring broke, so I bought this lady Bird FLEX Exhaust Spring in a hurry.
I can use it without problems.
View detail
Only by processing and attachment which thinks it is beautiful and are good also for appearance removing and exchanging a NORMAL, the Screw of easy free attachment, I think that it will be perfect if the Silencer side excels even back 5 mm to
Only by processing and
attachment which thinks it is beautiful and are good also for appearance removing and exchanging a NORMAL, the Screw of easy
free attachment,
I think that it will be perfect if the Silencer side excels even back 5 mm to a slight degree -- as [ reach / although the Silencer band of the
Carbon band is used / with an attached Screw / a special Lock nut ]
View detail
Fits: SUZUKI , HONDA VTR1000 SP-1, HONDA VTR1000 RC51, HONDA CBR954
[Webike Monitor] Since the abrasion was attached to the Swing arm only by falling lightly by Motorcycle in front of , the necessity for this product was felt after that. Since it can however use also as a receptacle of the Maintenance stand
[Webike Monitor] Since the abrasion was attached to the Swing arm only by falling lightly by Motorcycle in front of
, the necessity for this product was felt after that.
Since it can however use also as a receptacle of the Maintenance stands of a Hook type, the use there is usually main chiefly.
I think that anyone can do it since the
attachment itself is only attached to a Swing arm with a Bolt.
Attachment is impossible if there is no boss in a Swing arm, of course.
By latest Motorcycle, I think that it is attached by almost all vehicle types.
Since it is goods with high
flexibility, if the diameter of a Bolt and Pitch of a boss suit, I will consider [ that which can be attached and ].
View detail
[Webike Monitor] attachment vehicles are set to CB1300SF (SC40). In removing a Tandem step, since it seldom rode in twos, purchase and attachment were carried out. I think that finishing of the products and a Cost performance are the
[Webike Monitor]
attachment vehicles are set to CB1300SF (SC40).
In removing a Tandem step, since it seldom rode in twos, purchase and attachment were carried out.
I think that finishing of the
products and a Cost performance are the highest.
If it attaches as it is, the Silencer would approach the car-body side too much, and the inner side will have interfered in the Rear shock etc., so that the affinity with the collecting pipe (product made from Nojima) which he has merely attached may not be so good.
The suitable color was found there, and it inserted between the Stay and the Band, and canceled by taking out a Silencer outside.
Since finishing is really beautiful also at
, it is very much satisfied.
View detail
It was attached in order to prevent falling with standing and to reduce the damage of fall at a low speed. Since the attachment was done by a shop with drilling, I'm not sure, but the slider itself has improved and I do not feel roughness. Moreover, it is
It was attached in order to prevent falling with standing and to reduce the damage of fall at a low speed. Since the attachment was done by a shop with drilling, I'm not sure, but the slider itself has improved and I do not feel roughness. Moreover, it is good that it is not strangely conspicuous. View detail
It was attached in order to prevent a falling with standing and reduce the damage at a low speed. Since attachment and drilling of a cowl were done at a shop, I'm not sure, but as there are no burr, it may demonstrate the effect as expected.
It was attached in order to prevent a falling with standing and reduce the damage at a low speed. Since attachment and drilling of a cowl were done at a shop, I'm not sure, but as there are no burr, it may demonstrate the effect as expected. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
It is charm that 笙ェ normal which the tandem step was lost and was felt refreshed, and a fixing position do not change!
It is charm that 笙ェ normal which the tandem step was lost and was felt refreshed, and a fixing position do not change! View detail
Since it stabs and can equip easily only by screwing, it is good. Since appearance becomes a race ish, he is smart. Although he does not want to become hollow, of course, I think that it is effective.
Since it stabs and can equip easily only by screwing, it is good.
Since appearance becomes a race ish, he is smart.
Although he does not want to become hollow, of course, I think that it is effective.
View detail