Reviews
Fits: BMW R1250RT, BMW R1250RT, BMW R1200RT LC water-cooled
I'm generally satisfied
I bought it because I was worried that there was little ground contact of the Side Stand I chose a product that is less thick than I expected As a result, when I put in and out of the Side Stand at the time of getting into and out of the car, it became easy for my toes to catch However, you should be careful about the looseness of the mounting screws Regardless, one of the screws was loose in one of the three places after about 300 km of installation View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good stuff, but expensive
When the Side Stand is applied, it is extremely tilted to Left for some reason I bought it because I felt uncomfortable that I didn't feel like I was standing on a stand, I had a good sense of security and accuracy, but it was a bit more Smaller looking is better looking View detail
High accuracy and stability at the time of grounding has been increased
This Redea Stand End is more accurate than the other Manufacturer's that I have used before is high, and the clearance between the STAND base and the surface to be fixed is tight It is no longer necessary to bite the ground Also, there is a ditch on the back of the end for drainage, but this will prevent it from biting the ground I think we're doing well
Installation is just a Hexagonal Wrench with bolts to hold the washer in place But there is no rattling
The S750 is built on the bottom of the STAND I took a gold mallet and mashed up some pipes at random I think this kind of Stand End is a necessity for safety It is a good choice I chose Black, which is less noticeable to me, but the construction is good, so even if it's in other colors, it's not too subtle It could be a CustomPoint
View detail
Fits: SUZUKI GSX250R, SUZUKI GSX250, SUZUKI DL1000 V-STROM250, SUZUKI GSR250
OEM parts, design and color are good
This is a part for the SEA BASSGSX, but I purchased it for the SEA BASSJigzer I purchased and installed other products before, but it was impossible to install This time, because the STAND is the same as the OEM GSX, it fits perfectly It is easy to stop the car in a bad ground View detail
It didn't work
use it for the Short Side Stand of ninja250 KIJIMA's Lowdown Kit When I tried to use it, I couldn't use it because the leg of SIDE was too small
View detail
Things are nice, but …
The thickness of the STAND grounding part and the concave part of Bracket are the same Some of the clasps don't fit, and the clasp floats & hellip;
I raised and lowered the STAND a few times to see if it was loose, and then used it a couple of times and it didn't come loose LargeI think it's sturdy, but if you're worried about it, you might want to get something else
View detail
It's solid and secure!
This is a Fashionable and Comical Plate
Compared to other companies' products, the backside of this product has a non-slip finish
It's safe to use!
View detail
Fits: BMW R1200GS, BMW R1200GS Premium Line, BMW R1200GS Rally Premium Line, BMW R1250GS HP Premium Line, BMW R1250GS Premium Line
I think it's a little too expensive
There are a lot of things that can increase the ground clearance of a STAND, but there aren't a lot of options that can increase the height of the STAND So I chose this one with an eye to price
The price is high because it's well built and high quality, but it's simply a Side Stand I'm not sure if I need this much for something that is just to bulk up the It's pretty heavy
You could make it a little more Reduced in Cost and built Reasonable User friendly
View detail
Fits: HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200, HONDA VFR1200
It is easy to install
Prevents falls from caving in on gravel roads and asphalt on Side Stand
However, sand and other small things can get inside..
View detail
Fits: HARLEY-DAVIDSON SPORTSTER, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200V, HARLEY-DAVIDSON XL1200CB, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200CA, HARLEY-DAVIDSON XL1200C(110thAnv), HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200C, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL883N, HARLEY-DAVIDSON XL1200R, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL1200C
Quality for the price
Installation is not a problem It can be installed by pontooning
The function is exactly what you'd expect:it's easy to kick out the Side Stand
Quality was first and foremost as expected
About 20% cheaper and more appropriate?
View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Racer
It's easy to drop out
It fell off and was lost two months after installation
It was re-tightened twice during installation and is structurally prone to loosening from the beginning at the Manufacturer I think you should apply a loose-proofing agent to the Bolt
I was hesitant to re-purchase it because the costumes are terrible, but after operating it for a while without it, the parking place It's not that inconvenient and looks awkward if you choose to do so, so I decided it wasn't necessary
View detail
For people who won't let the Full Bank
APE 100 as Rear Sets, with APE 100 OEM STAND and Spring Bought it because it can be installed No problem to install, but the OEMSTAND makes the motorcycle stand up too much and I'm worried about it The OEMSTAND touches the road surface before the Full bank There is no reason to use Rear Sets in this case View detail
Fits: HONDA CRF250M, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L
2016:Used in CRF250L
It was supposed to arrive on 2/17, but I received an email yesterday saying it was shipped today
I felt happy that it was faster
I had been looking for it for a long time, but it was only R&G and the price was too high, so I was hesitant to buy it It was on sale at the end of the year for about 5,000, so I bought it
The installation was still easy when installed on a new car, I think, but in two years Side Stand The ground surface of the
The Stand End part was corrected and polished with the knife sharpening File and finally entered exactly
The screw is so shallow that even a little distortion is not allowed
The finish is beautiful
That's the R&G company
Finally, you can now park in mud and loose surfaces
Molybdenum grease is applied between the Stand End and R&G's Shoe Locking fluid is applied to the screws to prevent rust and detachment
Thank you very much
However, the actual finished product was better, although it was a bit different from the photo
View detail
Try to install it
I installed it in TMAX 530 DX in 2007. The ground area became Large, and the sense of stability increased in places such as earth.
In the wearing picture, it was from the front, but there was no picture from the rear side, but I could not understand, but the tip of the presser foot floats a little.
I think that it is better to use glue on the Screw fastening part. Also, sometimes it is necessary to confirm that it is not loose.
View detail
Fits: BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GTL
It will not collapse.
As my motorcycle was very heavy at midsummer hot days Asphalt was depressed with a good chance when using Side Stand. After attaching this Side Stand End, it does not collapse at all. However, because the getter is somewhat high, attention is required when the road is a road with a lowered Right and a road with a high Left. There is a danger that Motorcycle will collapse to Right Side. View detail
Excellent
This is very easy to install that need about 10 min and also this is stable than before. I give this 5 star. Hightly recommend. View detail
Fits: BMW R nineT, BMW R nineT Pure, BMW R nineT Racer
Although it can not be seen ? ? ?
There may be individual differences, but due to the fact that the accuracy is too tight, it became a slightly tight fitting.
Although I feel that I feel pretty looking is pretty bad, but it became easy to stop easily anyway.
Moreover, I feel that it became easier to kick even when putting out the STAND again.
View detail
Fits: BMW R nineT scrambler, BMW R nineT Urban G/S
Truly Quality
As expected, Earls Gear
It was easy to install with excellent machining precision
The quality of Anodized is also good and beautiful Parts.
It is easier to raise Motorcycle by suppressing the inclination when STAND is used
As the ground plane also becomes Large, the stability on the unpaved road will be much better.
View detail
I am in the same Manufacturer as Exhaust System and I like it
Since there is no particular plan to run Dirt or forest road in particular, it is necessary to increase the area of ??STAND
Although it was not, I was impulse buy because it was the same Manufacturer as Wai BurnExhaust System.
View detail
Fits: BMW F800S, BMW F800R, BMW F800ST, BMW F800S, BMW F800R, BMW F800ST
Although the precision of the work of the product is outstanding ...
It installed in F800ST.
The accuracy of the product's fabrication is wonderful.
On the other hand, the installation Side Stand was for casting? It was decided not to put on a pin but to scrape with File. Also, when paying STAND, the contact surface collapses because it hits Exhaust pipe. (This is also the product of Tulare TEC)
View detail