Reviews
Since only this was put on the store, it used. Although it is completely satisfactory and very much satisfied about attachment and the engine performance, a rectangle style is not pleasing somehow. For a while, I had the reflector portion made sma
Since only this was put on the store, it used.
Although it is completely satisfactory and very much satisfied about attachment and the engine performance, a rectangle style is not pleasing somehow.
For a while, I had the reflector portion made small and it has already extorted it.
When collected, I wanted you to make a little smaller a good point, and the bad point and reflector which are not found.
View detail
The inside of this time helmet becomes cloudy, since the contact lens is used, a shield is opened, and since a run is impossible, it purchases. I become cloudy and think that it is perfect as a stop. Although the fixed method fixes to the inner pa
The inside of this time helmet becomes cloudy, since the contact lens is used, a shield is opened, and since a run is impossible, it purchases.
I become cloudy and think that it is perfect as a stop.
Although the fixed method fixes to the inner package of a helmet on a magic tape, a magic tape does not adhere to the helmet of SUOMY.
It can be used once.
Moreover, when you remove a helmet, it is caught in a face, and since it is fairly painful, they are two points.
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSR mini
The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped. Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion. It reveals and interferes i
The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped.
Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion.
It reveals and interferes in a tire considerably.
If molding to the Faulk portion from a nose is too thick and is not cautious of clearance, a tire will split.
since -- I think that I will process only a few in the near future.
Is it unsuitable for wearing of those other than NSR?
(although it is a natural result and becomes empty in other vehicle type appropriation)
View detail
It is necessary to remove a tandem step. In my case, the semi-racing baffle is also attached, but sound with which a heavy low is effective and it was filled for a while is the feature. In an external muffler, I think that it is a quiet category.
It is necessary to remove a tandem step.
In my case, the semi-racing baffle is also attached, but sound with which a heavy low is effective and it was filled for a while is the feature.
In an external muffler, I think that it is a quiet category.
Although appearance and sound are pleasing, if it is going to start the engine, regrettably one kick pedal is likely to interfere.
View detail
Though it was regrettable when attached to IMPULSE400, torque decreased sharply bordering on near 6000RPM. Probably a carburetor needs to be adjusted!! However, since the cyclone of the yoshimura is contained in my case, it may be the cause!! However,
Though it was regrettable when attached to IMPULSE400, torque decreased sharply bordering on near 6000RPM.
Probably a carburetor needs to be adjusted!! However, since the cyclone of the yoshimura is contained in my case, it may be the cause!! However, after adjustment of a carburetor can be blown ordinarily! Since it changes to sound as KYUUN [ just still like a turboengine car ] whose suction noise is, he is very smart!!
View detail
A clutch wire goes out, and since it is year ends and New Year holidays, brand-name parts cannot be ordered. Then, although this got, if there is no margin in the wire from an outer, it cannot tie as it is. Slight metal of an outer and inside whic
A clutch wire goes out, and since it is year ends and New Year holidays, brand-name parts cannot be ordered.
Then, although this got, if there is no margin in the wire from an outer, it cannot tie as it is.
Slight metal of an outer and inside which is carrying out the round and round was cut, the die length of the wire was secured, and it changed into the state where it can use somehow.
Since this processing is impossible on the spot, if the wire itself has a margin, they will be very secure items.
View detail
This product performs what is called an electrolytic capacitor tune. Although I equipped GSR400 with hot lightning, change of the engine performance which can be felt during a run was not felt at all (there may be the placebo effect). I think that
This product performs what is called an electrolytic capacitor tune.
Although I equipped GSR400 with hot lightning, change of the engine performance which can be felt during a run was not felt at all (there may be the placebo effect).
I think that the rate of hot lightning aiming at the effect which eases the burden on a battery or electronic autoparts is larger than the purpose of improving travel performance.
Only Ho who looks at the burden from this to a motorcycle by long Sakka recommends purchase.
If it is the raised evaluation so far, * is about three, but as a reason made into the two stars, performance is the cause.
This price is very unbalance by this engine performance and effect.
I think that evaluation had gone up when the price was cheap to a slight degree.
If it collects and will see by a good point and long Sakka, the burden on electronic autoparts and a battery will be eased.
Change of bad point and travel performance has high nothing and cost.
View detail
Since repair of a pure carburetor was likely to cost 20000 yen or more, I purchased FCR for ZXR250 drastically. however -- -- there is this no sign that an axel wire sticks to the extent that he would like to come to call it ?? for ZXR250 truly.
Since repair of a pure carburetor was likely to cost 20000 yen or more, I purchased FCR for ZXR250 drastically.
however -- -- there is this no sign that an axel wire sticks to the extent that he would like to come to call it ?? for ZXR250 truly.
I think that it is not attached no matter what wire it may probably bring.
Therefore, it has changed and equipped with the angle of a wire bracket by general-purpose stay.
Since the pure twist became heavy, those who go for touring well regard the throttle itself as a high throttle being indispensable.
After the back equipped, he thought that he would start the engine, but it did not start at all.
This FCR does not require even an engine for the engine starting in case of a pure carburetor.
Since the model of the vehicles itself is also old, I think that I will adjust many things from now on, but it is the touch which had expectation betrayed although high money was paid.
It may be uncongenial to ZXR250.
The direction to buy considers that it is better to choose carefully.
I am pleased, if a reference grade is used and it gets to the last, since it is private comment.
View detail
Fits: HONDA CBR1000 F 87-96, HONDA CBR1000 F 87-96
Since the spring is strengthened, lever handling becomes hot with a natural thing. Although I had inclusion performed by Schopp, there is [ please use the board of normal to see you delete, when the disc plate currently packed up does not enter, and ]
Since the spring is strengthened, lever handling becomes hot with a natural thing.
Although I had inclusion performed by Schopp, there is [ please use the board of normal to see you delete, when the disc plate currently packed up does not enter, and ] a sentence in a description, and I was able to hear about the continental generous portion.
However, Power who increased is told certainly.
View detail
Although it is necessary to do the very troublesome work called stopping four stay with a total of eight bolts, and a nut, and also stopping it by a total of eight bolts at a radiator, it can do by itself only by being troublesome. However, since it i
Although it is necessary to do the very troublesome work called stopping four stay with a total of eight bolts, and a nut, and also stopping it by a total of eight bolts at a radiator, it can do by itself only by being troublesome.
However, since it is iron, it will rust to a situation and an instant.
An 8000 yen price is high now.
In public, it is said that a stainless net is bought in a home center, it is processed and attaching [ to EJIETA ] mist is, and the engine performance also carries out the recommend of that one also pocketbook.
View detail
It purchased in order to correct direction of the analog oil temperature gauge made from a daytona. I think that it was high shopping since there was a use only in this for the moment.
It purchased in order to correct direction of the analog oil temperature gauge made from a daytona.
I think that it was high shopping since there was a use only in this for the moment.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI VOLTY, KAWASAKI 250TR, Others
When headlight stay was exchanged for an external article from an authentic positive one, since the move of a blinker was needed, it purchased. When he placed an order, he thought whether to arrive in the state of a photograph, but he arrived in the s
When headlight stay was exchanged for an external article from an authentic positive one, since the move of a blinker was needed, it purchased.
When he placed an order, he thought whether to arrive in the state of a photograph, but he arrived in the state of the straight board (?) with which only both ends were bent rectangular in practice.
since -- an attached rubber is made to blow and it bends by itself according to Faulk.
Since both ends did not adhere very much just, pains were taken a little to let the bolt of a blinker pass.
Since the angle of the blinker on either side changed delicately when how to bend was distorted in addition, pains was taken also over the adjustment.
Although it was used for about two months, it exchanged for the thing of the other company after all.
.
View detail
This time purchase since there are many opportunities to run things and a metropolitan area with many passages of a truck. A filter is not that attached and it replaces it to an aerofilter. If the back of a truck is run although there is no stuffi
This time purchase since there are many opportunities to run things and a metropolitan area with many passages of a truck.
A filter is not that attached and it replaces it to an aerofilter.
If the back of a truck is run although there is no stuffiness in particular when it actually attaches, there should be the smell of exhaust gas.
Moreover, also after passing a truck, the mask is filled with the smell of exhaust gas for a while.
Although merit does not feel for the moment, it is expected that there is a dramatic effect in that case since the season of pollen has not run yet for the time being.
View detail
although he thought that he would make it immersed in carbon and being purchased -- structure of other A-TECH products -- it was different in why and processing etc. were quite required. Although a pure tail lamp attachment screw is 5 mm, four places
although he thought that he would make it immersed in carbon and being purchased -- structure of other A-TECH products -- it was different in why and processing etc. were quite required.
Although a pure tail lamp attachment screw is 5 mm, four places 1) 5 mm of upper parts,
Why or the back does not enter about 5 cm at the time of main part wearing considered to be 2 usual bolt-on [ which was spent for small 1 hour by the time it is 6 mm of lower parts and he noticed it ]... Examining-point which is different as compared with normal 1 hour ... The metal fittings of the tail lamp installation base had interfered with the main part frame.
Metal-fittings processing is carried out with sander, and a bolt does not suit easily at the time of clear 3 tail bar attachment (although it seemed that the bolt hole location was narrow as it has swollen at the time of molding).
Although after wearing which is attached almost forcibly has a feeling of unification of a carbon design and it is very much satisfied, it is quite ??? at product precision.
Since it is clearly amusing compared with other products of A-TECH, they are goods to examine again.
View detail
Since it exchanged, and the tool got to know the option and stability was surprised that it is increase and that it is more expensive than a spring in that tool after arriving although it became very good, it is this evaluation.
Since it exchanged, and the tool got to know the option and stability was surprised that it is increase and that it is more expensive than a spring in that tool after arriving although it became very good, it is this evaluation. View detail
He buys MURUCHI and it is 500 km. It is an oil change. Since he would like to exchange by himself, a filter wrench is purchased. Although rigidity is anxious structure, it tries for the time being. As it had not fitted in deeply, the filte
He buys MURUCHI and it is 500 km.
It is an oil change.
Since he would like to exchange by himself, a filter wrench is purchased.
Although rigidity is anxious structure, it tries for the time being.
As it had not fitted in deeply, the filter side has licked.
It removed with the pipe wrench reluctantly.
When it worked having inserted in firmly at the time of attachment, there was no problem in bolting, but it does not escape shortly ...
The angle was struck and taken out.
In the 2nd filter replacement, there was not being easy to turn whether it got used and stopping falling out.
You are also regarded as if warned at the time of the first time.
View detail
The ape 50 was equipped as output port of an oil cooler. The goods themselves are made very finely and there was neither a bali nor a wound. I think that such a little thing will lead to a manufacturer's reliance. I think how it is that takes
The ape 50 was equipped as output port of an oil cooler.
The goods themselves are made very finely and there was neither a bali nor a wound.
I think that such a little thing will lead to a manufacturer's reliance.
I think how it is that takes no less than 800 yen to this product.
Although the tapped hole was cut and attached to the clutch cover, I got it to be safer to give a pro the direction where processing of drilling etc. is diffident.
I think that it will succeed if it is processed by itself, and it takes care about the following three points.
- Put the mark on the place which punctures to a punch correctly.
- Change the drill into the thick thing gradually.
Like [ of 1 mm -> 2 mm -> 4 mm -> 6.7 mm ].
- Use cutting oil, when using drilling and a tap, and carry out slowly.
I think that it will succeed if it takes care about these.
If it practices, I will think that it is better.
View detail
Since pleasing ! was too short and back became hard to see, the design was carried out to this evaluation. Since the price is cheap well ...
Since pleasing ! was too short and back became hard to see, the design was carried out to this evaluation.
Since the price is cheap well ...
View detail
The run where the direction of the original manufacturer's product was stabilized was completed. A price is past quantity. It is recommended at those who want to upgrade for the time being with a pure carburetor in respect of a maintenance-free.
The run where the direction of the original manufacturer's product was stabilized was completed.
A price is past quantity.
It is recommended at those who want to upgrade for the time being with a pure carburetor in respect of a maintenance-free.
maintenance -- if it is those who make it diligent, NGK and a denso will think that they are good.
View detail
Regrettable The goods were returned to Webike. I am glad! Although the photograph was taken, the trifling defect was found in goods. As for the left-hand side pannier, the emblem of GIVI has floated. Although the end is stuck, middle is vacant
Regrettable The goods were returned to Webike.
I am glad! Although the photograph was taken, the trifling defect was found in goods.
As for the left-hand side pannier, the emblem of GIVI has floated.
Although the end is stuck, middle is vacant as for it.
push and adhere -- although like, it does not adhere.
Into the end portion of the parts of right-hand side satin silver, although it may be a small thing, paint application unevenness (probably air bubbles) is discovered.
Since the left-hand side pannier was perfect paint application, even if compared, it thinks it is distorted.
Since it was a product made from an italy, he thought that it was unavoidable, but when it often sees, there is a crack which is attached to a red plastic part only by the very small needle ? and something.
Although the depth was measured at the point of the nail, did it attach during the work at the time of italy packing? In the quality level of an italy, it may be to there.
Although the fault of Mr. Webike of a vendor thinks zero, I was allowed to return the goods.
Since the GIVI V35N right-and-left set deer of yearning was also due to make stay by a one-off, it is dramatically regrettable.
since it paid on the point for about ten 10,000 yen by the point of the affiliate this time, he thought whether I could sell by Yahoo! Auctions as it is, but the purchased person judged that he was too much pitiful.
The state which is waiting for a deed point to come returned-goods work on the contrary promptly.
Although I am sorry at the work for the check mistake of people specializing in Webike of an importing agency, it is a store of the best products offered in Japan, and sense of security.
I was allowed to consider it as returned goods this time.
View detail