Reviews
Fits: SUZUKI Universal, SUZUKI Universal
It's kind of thin and cheap-looking.
It is only a Carbon Style Seal.
It is thin without thickness and looks cheap.
Well, the price is the price.
Tank cap is dirty and just right for a blindfold!
View detail
gaudy
It looks a little cheap. It has a dress-up effect in its own way, but the plastic model looks like a plastic model for the price, so there may be differences in likes and dislikes. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2
It was cheap ….
[How is it used?
Purchased as OEM rust was becoming noticeable.
Was the one you received as per Image?
As far as I can see, it looks exactly like OEM Product.
Was the installation difficult?
I thought it would be easy since it was replacing an OEM Product.
How was your experience with it?
Installed in OEM light case but no Fit. Nah.
[Included Parts:were they on?
Included Parts:None
[Was there anything that disappointed you?
I had high expectations because the price was half the price of OEM Product, but the world is not so generous.
If you force it on, you can install it, but there will be a gap.
We will buy back OEM Product sooner or later.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
Brightness is very bright
The brightness itself is very bright.
The 400 had to be removed and passed through the inspection because of the inspection.
The light was Rose and Cutline did not appear.
Strangely, under the Light 1m in front is bright.
The second floor of the building was also illuminated, making it impossible to inspect the car.
The brightness itself is quite bright and easy to see.
Since they are H4, they usually illuminate just a little lower than usual, and if you use the High beam more often, you will be less likely to be bothered by other cars.
View detail
MADMAX Mad Max Supper Grip
Purchased and installed for Grip replacement. The situation is that thicker Gloves are slippery even if you have a good firm grip. It turns out that the surface is hard due to the material and the surface treatment makes it slippery. This is not so much of a problem in the summer, but from Grip's point of view, this is a serious problem. We hope that this problem will be solved as soon as possible. View detail
Exchange for initial defects.
The design is good, but the plating is not very beautiful and the surface seems to be wavy. View detail
Plating is Beauty
Was the one you received as per Image?
It's almost exactly as Image, but the base is cheaply made.
[Points to note]
You need to pay attention to the Wiring, and it doesn't work according to the Instruction Manual. Both the wiring of the single car and the wire of this product must be cut and connected.
The pedestal has rusted within 6 months.
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
It didn't pass inspection.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive. View detail
Fits: KAWASAKI ESTRELLA [Estrella]., KAWASAKI W400, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI W650, KAWASAKI ESTRELLA [Estrella]., KAWASAKI W400, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI W650
Wiring terminals are disconnected.
After the arrival of the product, I checked the lighting by temporary installation, and after that, I disconnected the wiring connection. The terminal bracket was disconnected from the wiring and remained on the female side. In the end, I had to rebuild the terminal and spent +Alpha. It is necessary to check the Wiring terminal bracket before installation. View detail
Fits: Others
I'm sorry for everything.
I received the product and went to install it, but the Mounting Bracket was not included!
When you request to resend Bracket. "Manufacturer is out of stock. And the answer was.... Did you try to send only the parts that you have in stock for now because they are out of stock?
I'm sorry, but I'm not sure if I've got the right quantity of Brackets.:The length of the Bolt in the 2 Sets is different.
The hole in the Bracket is too big for the Bolt's head to pass through easily, so it cannot be installed.
I had no choice but to install the Bolt of M6 with the Washer of For M8.
The quality is as good as the price so no more or less than expected.
It seems dark for 10W though. (It's like 5W made by other manufacturer)
Body is Material:Because it is made of aluminum, the screw hole is also made of aluminum, so it may be corroded in the environment where it rains.
If you don't care about practicality, the price is reasonable, so I recommend it, although it became a dry evaluation.
View detail
Fits: YAMAHA MT01, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA BT1100, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1200, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA MT-25, YAMAHA MT-09, YAMAHA MT-03, YAMAHA FZS1000 Phaser, YAMAHA XJ400S conversion, YAMAHA FZ400, YAMAHA YZF-R25, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R
We can't install it
I bought one for Yamaha, but I couldn't install it.
I'm sure there are some differences in the car models...
If you're buying this, I think you should save up your Gold and buy the Rear Sets Kit from my trusty Brand!
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
The price..
I purchased this for a low price but the size is small as others have written I am not satisfied with it It is a shame View detail
I got a bad one
I bought it because it was written that it can be installed on the ST250e, but the width is about 2cm short There is no screw hole to install it Also, there is no screw hole to install it View detail
Fits: BMW R100, BMW R80, DUCATI 1198, DUCATI 848, DUCATI 848EVO, HONDA CS50, HONDA Dio XR Baja, KAWASAKI KDX200SR, KAWASAKI KDX220SR, KAWASAKI KDX250SR, YAMAHA YB50, YAMAHA YB-1, HONDA CB50, HONDA CB90, HONDA CB92, HONDA CB93, HONDA CL125, HONDA CL50, HONDA CL65, HONDA CL70
Machining accuracy:one of the worst
Screw holes on Shaft are not machined vertically and are bent
(Quality worth the price.)
While driving, the screw may come loose and in the worst case, the mirror surface may come off …
View detail
It cannot be installed easily
If it's installed as it is, it will hit the Brake bar and the Left will hit the Switch cover Bracket processing and additional installation However, the coldness of the hand is softened The color of the bracket was also Brown View detail
You've got the wrong model of car!
I bought it as a Front blinker replacement for the SL230, but when I put it on, it didn't blink The light is never left on
I looked at the bulbs inside and neither Bolt nor Watt are right
Shoddy construction is not a problem because it's worth the price, but selling something that doesn't fit the conforming model is a scam
View detail
So-so things
The appearance of this pedal is very handsome, but the manufacturer did not provide the installation parts during installation, and the original parts cannot be installed. You have to buy additional parts to install it, but unfortunately, after installing this pedal, It is not firm and loose as the original one, because its pedals are drilled too finely and cannot be returned to the original one. You have to buy a thin one before you can install it. The evaluation is really average. The shape of this pedal is very handsome, but the manufacturer did not provide the installation of parts when installed, and the original parts were not installed, and it was necessary to buy additional parts to install, but unfortunately, after installing the pedal, He has no original strong, loose, because its foot drilling is too fine, can not be used back to the original, to buy a fine can be installed, the evaluation is really like.(translated by Google Translator) View detail
Not durable
Three months after installation, near the Grip end of Throttle was torn. To be sorry. Since it is not Pierced Type, I wonder if twist could not be absorbed.. View detail
Fits: HONDA HORNET250, HONDA BROS400, HONDA XELVIS, HONDA JOKER90, HONDA Shadow slasher750, HONDA Shadow slasher750, HONDA Shadow slasher750, HONDA SHADOW750, HONDA SHADOW400, HONDA X4, HONDA X4, HONDA X4, HONDA VTZ250, HONDA VTZ250, HONDA VTZ250, HONDA MAGNA750, HONDA MAGNA750, HONDA MAGNA750, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
Good appearance and ease of grip. However, the sweetness of making is prominent.
I purchased it for exchange at the same time as Clutch lever. I was fascinated by the appearance and the shape that seemed easy to grasp.
As you can see in other reviews, making is sweet. The adjustment part seems to be out of something's beat. Also, when I attempted to install on compatible models, Screw did not enter. So, I installed a little processed. I like Visual very much. However, I returned to OEMLever which was originally attached ....
In conclusion, considering the price, this making is reasonable. We will keep it as a reserve when Lever breaks.
View detail
Things and shapes of NHRC "Only" Is same
Installed on SUPER CUB 110 JA 10
Previously attached by NHRC company, included Partsetc. Together with you
While that was a Large satisfactory screen, I was wondering why it is so cheap ...
Purchase at once
Bracket and Bolt are Silver colors, but they were painted black with LacquerSpray
I was going to repair it with an oil pen when it was peeled off, so I just applied it properly and painted it (Lol)
Quantity : 1pc. It looks like a good eye image
I think that you can see that the screen surface is cloudy in the second image
And the surface does not have a smooth surface
It is a feeling like a yuzu skin when painting
It is said that it is a color like Olato used for Bunan candy or it is called muddiness ...
Coupled with it and this yuzu skin ...
Night driving is quite dangerous ...
Light is irregular reflection, visibility is bad
Since this screen has height, visibility almost exceeds this screen
Meanwhile, the visibility of Yuzu's skin + oblate-like Screen is not very rainy, but it can not bear practical use
I was looking forward from the top of the screen stretched back to my back
Although it seems that it does not seem to be Large when it is an image, since it is normal Screen that it is originally possible to see the other side to Clear ...
I immediately removed it and changed it to Middle Screen of Asahi Dashu.
Asahi windshield's Middle Screen will also raise Impre so please refer to that image ...
Short cut it for use for processing, or if there is still a way of using it still wonder ...
Do not make it look over the screen, use it as a Short Screen, Visor, ...
Although I thought that it would be good if we treat the surface with 2000 number - liquid Compound etc ...
Indeed it is a bit of a thing to do so, and ...
Only in the daytime, do not ride on rain, only short distance
I think that it can be used even if it is ...
When it is used on a daily basis, practicality is almost none
Do not expect it as windshield and buy it
Let's buy NHRC's things, Asahi windshield, HondaOEM
It is late after accidents occurred
View detail