Reviews
I am satisfied with the look and functionality of the product.
I operate the Clutch with my index and middle fingers, but with the OEM Lever, I had to grip the Clutch enough to activate the Shifter, which was annoying, so I bought it in a hurry.
We had to wait quite a while for it to come in, but it was the right decision to install it.
I am an amateur, but I was able to replace and install it.
View detail
Fits: BMW R nine T, BMW F800ST (STRADA), BMW R1200S, BMW F800S, BMW F800R
555B030 is not compatible with 23’RnineT
The thing is good, but unfortunately the conformity information was wrong.
I cried myself to sleep when I realized that the return and exchange deadline had passed.
By the way, the picture is also different; it is not the Type that is Axle ShaftPenetrating, but the Quantity.:Pair (for Left and Right) The independent one came, but so did the Manual with the model number, so perhaps the photo is different.
View detail
Fits: BUELL M2 Cyclone, BUELL S1 Lightning [Lightning]., BUELL X1 Lightning [Lightning]., BUELL XB12R Firebolt [Firebolt](04-08), BUELL XB12S Lightning [Lightning](04-08), BUELL XB12Ss Lightning [Lightning](06-09), BUELL XB12STT Lightning Super TT [Lightning Super TT](07-08), BUELL XB9R Firebolt [Firebolt](02-04), BUELL XB12R Firebolt [Firebolt](04-08), BUELL XB12S Lightning [Lightning](04-08), BUELL XB12Ss Lightning [Lightning](06-09), BUELL XB12STT Lightning Super TT [Lightning Super TT](07-08), BUELL XB9R Firebolt [Firebolt](02-04)
LSL Adjustable Levers for Buell XB12
About quality and texture - Top quality. Beautiful black on black CNC machined levers. Light on weight and high in strength. About the feeling of use - The short levers look great and the control feel from them with the adjusters can be perfectly set to your needs. Products to buy together - I paired the short levers up with some bar end mirrors to complete the look of my handlebar setup. Difficulty of installation - I found the installation of the levers very simple with only basic hand tools. I would recommend adding a little grease to the pivot points, clutch cable end and master cyclinder piston contact area to achieve a smooth operation. Cost performance and comparison with other products - Expensive levers if you look at what is available out there but there is no denying how good the quality and feel of these levers is which you will not get from a lesser quality product. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Take care when order the brake lever for your XB12 as the pivot point part changed for the 2009 and 2010 models. View detail
completely pontoon-mounted
I chose this Lever because I hang two Brakes and I wanted to be a bit stylish. It is a complete bolt-on, and there are no OEMParts to use with it. Just pull out the bolt on the shaft and replace it.
I am satisfied with it as dress-up parts, although the actual effect may not be so great.
View detail
LSL Adjustable Type Clutch Lever for 2018 CB1000R
Very good product. Very well made. Very good quality build. Easy to install. Smooth movement. Much improved feel over the factory clutch lever View detail
Red.
It is used for HORNET600.
Because the body is red and the engine is black, I chose red as one point.
The color is Anodized and is beautiful.
It doesn't look like this is the Guard, so it's less assertive and casual.
View detail
Overpriced, but acceptable quality.
I'm using ZETA's short lever.
I was looking for something shorter and came across this product.
The Handlebar is also made by LSL and
There are high quality PartsManufacturer Images
I bought it as soon as possible because it was a new product.
LeverBody and Adjuster are unified in Black
BlackoutSpec.
2 bottlesQuantity as it was not specifically mentioned at the time of purchase:I thought it was a set.
I was surprised when I received one bottle.
It's hard to tell from the pictures. Can we cut the meat off here? This is a good design with no complaints.
It's almost twice the price of the ZETA product, but when you install it, there's no wobble at all.
In terms of quality, it's definitely a head turner.
It's an angular design, so it's a matter of taste.
I think the grip is excellent.
The thicker grip makes it easier to put pressure on the short lever.
It's the equivalent of the 3Finger in Lever for Off-Road, so
It is shorter than the average short lever.
Also, I heard that it has passed the ABE standard.
I wasn't able to find out if there were any provisions for strength standards.
In the event of a change in plant equipment or a change in plant representatives
required to report, and failure to do so would result in the withdrawal of the standard.
It seems to be an unnecessarily strict standard.
2 bottlesQuantity:It was a miscalculation that it wasn't Set.
I liked it so much that I rushed to order the Brake lever side as well.
You'll have to buy One Side at a time, so you'll have to open it up.
Quantity:Pair (for Left and Right) and change the color of the Adjuster in
I think it's possible to make it one point.
It's not something I would recommend to everyone.
This is recommended for the discerning rider who does not feel comfortable with ZETA or Kanaya.
View detail
Fits: BMW S1000XR, BMW F900R, BMW F900XR, BMW R nine T, BMW F850GS, BMW F750GS, BMW R nine T Pure, BMW R nine T Racer, BMW R nine T Scrambler, BMW R nine T Urban GS
I'm satisfied.
Replaced Lever after a fall at RidingSchool, bought it because it was available earlier than the OEM Product. Installation was fine and the texture is more upscale than the OEM product I feel. I was worried when I saw on social media about the external Brake lever Troubles, but so far no Troubles. the OEM arrived but I will keep it for the Troubles and use this Lever. View detail
Fits: SUZUKI INAZUMA1200(GV76A), SUZUKI GSF1200/BANDIT1200(GV75A), SUZUKI GSF1200S/BANDIT1200S(GV75A), SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI RF900R
More than expected, and Labor operations are light!
Fed up with the distance and weight of NORMALLever, I bought this product.
As for the Lever's distance, it can be adjusted to your liking, as expected.
As for the Lever's weight, I honestly didn't expect it because the Lever ratio etc. is also unknown.
It was a disappointment in a good way.
Lever operation is now very light and it made me think that I should have bought it earlier.
The product is beautiful and I am very satisfied with it.
View detail
Good feeling ♪
I am wearing BANDIT 1250 SF.
Because it has a heavy weight Motorcycle so I put on the meaning of insurance and I am wearing it from car delivery.
I liked the shape the most compared to those of other companies.
I can choose the color of the installation Pad and I think that it is convenient because only Pad can be changed ♪
I think that it is also high with weight and solid texture.
However, since I think that it is Engine Guard's side rather than protecting all of Cowl, those who seek defense may need to use it in combination with other things.
It became a good point of my car ♪
I will just try not to take care of me (Lol)
View detail
Helpful
I got stood up.. Maybe because I was right beside Motorcycle, it may be because I was supported a little, but I did not have one scratch on the car body. I think it depends on how to fall but there is an effect.
The plastic part was scraped even with light standing, and it felt surprisingly fragile. However, because only Plastic can be exchanged, it is economical.
Design is not too conspicuous, I think it is cool.
View detail
I am saved !!
Other than this product, it will not hurt, so even replacing it is ok. It is good that the area of ??shock absorption is wide!
I think that Design is also the best. I am saving because the price of this is not high.
View detail
In the state where it does not understand what happened reluctantly rather than a GEAR fell out in the case of left-turn dispatch, and it became a Neutral and having pushed down.When seen in fear, the crack went into the portion of the end of a Muffler th
In the state where it does not understand what happened reluctantly rather than a GEAR fell out in the case of left-turn dispatch, and it became a Neutral and having pushed down.When seen in fear, the crack went into the portion of the end of a Muffler the Crash pad and the direction under a Cowl, but LSL can be managed with damage only the parts of a Plastic.It is the highest that it is OK in exchange of only the part! A price is also cheap and it was saved very much! View detail
carrying out right [ of the Design ], if it reaches in search of an Engine slider variously -- also throwing away -- it was easy.It was good to purchase a LSL Mounting kit.Because a kana ? SLIDER50 Head is merely an option a useless place only with this p
carrying out right [ of the Design ], if it reaches in search of an Engine slider variously -- also throwing away -- it was easy.It was good to purchase a LSL Mounting kit.Because a kana ? SLIDER50 Head is merely an option a useless place only with this product A head single article has the high amount of money! Or [ that it is more satisfactory if it is attached and is this price to a Head ]! View detail
[Webike Monitor] It attached to YZF-R125. On the occasion of attachment, the Stay was needed separately, and I attached to the base of the Roller SLIDER50 of Yamaha Europe. It is delightful limitations that at least type is smart and
[Webike Monitor] It attached to
YZF-R125.
On the occasion of
attachment, the Stay was needed separately, and I attached to the base of the Roller SLIDER50 of Yamaha Europe.
It is delightful limitations that at least
type is smart and that color can also be chosen.
It is Point size that a Fashion can be enjoyed, although it is a Guard Sliders for
safety! The size of the hole of the
SLIDER50 was M10, and the depth was about 15 mm.
Since the Protector base for R125 mentioned above is a size of M8, it makes M8-M10 Spacer blow and it has attached it.
Since others [ photograph / after
attachment ] are also carried, I would like to carry the photograph at the time of decomposition.
It hopes to like to come to buy the direction which looked at this.
View detail
[Webike Monitor] A fall is purchased as look before you leap on the Motorcycle for an accessory. Hemispherical foundations are considered to be a product made from an Aluminum, and Anodized finishing. It is a black plastic part to co
[Webike Monitor] A fall is purchased as look before you leap on the
Motorcycle for an accessory.
Hemispherical foundations are considered to be a product made from an Aluminum, and Anodized finishing.
It is a black plastic part to contact a ground surface at the time of a fall.
Unlike a SLIDER50 besides
, since the plastic part is small, impact-absorbing power may be weak, but color play can be performed.
Although safely united with the color of the Frame this time ...
I think that it is a big charm that color play can be performed if it is the purpose with which emergency is equipped by a Street youth at any rate if the
fall is a premised Race use.
View detail
FZS1000 is equipped. The Stay for Crash-pad wearing of the Manufacturer. It fixes in the form where the Bolt which fixes the Engine lower part and a Frame is exchanged. When exchanging every [ single-sided ], there was also no special tool and it was e
FZS1000 is equipped.
The Stay for Crash-pad wearing of the Manufacturer.
It fixes in the form where the Bolt which fixes the Engine lower part and a Frame is exchanged.
When exchanging every [ single-sided ], there was also no special tool and it was exchangeable.
After
wearing, although it had fallen, the car body was guarded firmly and the Frame Engine was safe.
View detail
It attached for FZS1000.It was not truly touch called a Guard, and appearance was also comfortable and was good.There was also much Variation in color and it was able to choose the color which suited its own Motorcycle.Although it fell after attachmen
It attached for FZS1000.It was not truly touch called a Guard, and appearance was also comfortable and was good.There was also much Variation in color and it was able to choose the color which suited its own Motorcycle.Although it fell after
attachment, that the crack was attached protected the car body firmly only in the portion of resin.Since the portion of the resin Parts which got damaged also had a Repair parts, it was good to correct with a sufficient Cost performance.
View detail
Since it was written that it could be equipped by bolt on, I purchased. If I have one set, it is heavy, but I think it would be ok if it becomes insurance for the time being. However, I considered whether it is ok or not that the bolts attached to an engi
Since it was written that it could be equipped by bolt on, I purchased. If I have one set, it is heavy, but I think it would be ok if it becomes insurance for the time being. However, I considered whether it is ok or not that the bolts attached to an engine is a stainless. View detail
It chose by the low price of appearance and a price. Since it is not necessary to make a hole in a cowl and also and the whole design is not broken down and also color was also chosen, it chose. Since it has not actually fallen, the degree of an e
It chose by the low price of appearance and a price.
Since it is not necessary to make a hole in a cowl and also and the whole design is not broken down and also color was also chosen, it chose.
Since it has not actually fallen, the degree of an effect is not understood, but the damage by light fall is likely to be mitigable.
View detail