Reviews
Looks good:??
A must-have for forest road touring. Good texture and appearance. View detail
Just paste it directly into the Frame.
[How is it used?
This will manage the maintenance of the TRAILRacerKLX230R over time.
Was the one you received as per Image?
Just the right Size and easy to operate.
How was your experience with it?
The display is large and easy to read, and the double-sided tape is firmly adhered to the unit. The sensitivity can also be adjusted.
[Points to note]
The enclosed Instruction Manual is in a foreign language only.
I'll translate it by Google Translate.
How did it compare to other products?
The low price of this product, however, gives us a sense of security because it is a well-known manufacturer's product.
View detail
Parenthesis good
The mounting bracket is thick and firm.
I don't know, I haven't mocked it up yet.
Looks sturdy!
View detail
Backpack for Motorcycle
Large size is just right and there is an inner pocket.
It is very easy to use and to organize my luggage.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
For Smooth Shift change
There is a hole on the left side of the frame for attaching the swingarm, and the work boots would often get caught on the convex part of the hole, causing shifting errors (this may not be a problem depending on the finish of the outer side of the boots). (This may not be a problem depending on the finish of the outer side of the boots.)
I happened to see it installed on a vehicle of the same model that I saw, so I ordered it and installed it.
Hexagonal Wrench was used for part of the installation, but most of the installation was completed by tightening Tie Wrap and cutting the excess part with Nipper.
After the test ride, I confirmed that the ankle grips are easier to do and the snagging of the Boots has been eliminated.
However, when removing the Swingarm for servicing, it must be removed because it is in the way, and a new Tie Wrap is needed in that case.
I don't know how durable it is, but it makes it easier to ride and I appreciate the product.
View detail
Steady bitter
Quality, finish, no complaints!
It is indeed ACERBIS.
View detail
usually
It can be used normally, but it is better to retighten it regularly. Especially this type is a pain to remove because it remains inside if it is loosened too much. I wanted to buy the type that has a bolt inside and expands the circumference, but I had no choice because I couldn't find it. View detail
Love the look, durability and over all use of this tank
Not sure what all the fuss was about as far as install. Stock bolts screwed Shrouds easily back in. Most difficult part was disconnecting the hose but thats because my hands are fat. No manipulation or longer screws needed. Easy installation even removing and installing the fuel pump went smooth. Love that I have almost an extra gallon of fuel now.I installed this on my CRF and love it. The fitment was great and the extended fuel range is fantastic. On my particular bike the tank replaces the original tank panels. My only tiny complaint was one of the four screws that holds in the fuel pump stripped with minimal force. Luckily there's not leaks after miles and miles of hard riding. I'll still take an Acerbis tank over any other aftermarket tank any way.Highly recommend if you're thinking about getting it.best price, fast and careful packaging.I'm glad to doing shopping from you,Thanks Webike View detail
Bitter Bitter X-GRIPFrame protector
Material:It is plastic, so the texture is not that great, but it is sufficient for the purpose of preventing scratches on the Frame.
The rest is attached with rubber, but it is so tight that it will not fall off easily.
View detail
Fits: KTM EXC125, KTM EXC200, KTM EXC250, KTM EXC300, KTM EXC-F250, KTM EXC-F350, KTM EXC-F450, KTM SX125, KTM SX15, KTM SX250, KTM SX-F250, KTM SX-F350, KTM SX-F450, KTM SX-F505, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA TC125, HUSQVARNA TC125TX, HUSQVARNA TC250
Good looking guard. Snug fit on KTM
Matches the Acerbis rotor guard kit.fast and easy to install with 10mm socket. Beginner level installation skills.Good looking product. Would have given five starts but the fit is a little tight with the fork tube guards. I happened to have the fork tube guards off when I installed the these leg guards. I found that the fork tube guards had to go on first so you you can tuck the outside of the leg guards under the fork tube guards.Havent rode in mud yet, so not sure if it will be good. Will definitely protect lower shock from rocks and crashes, the plastic is really tough.. Had to remove the wheel to get brake side to fit but thats because I had rotor guard on. View detail
It looks good, but how durable are the fixtures?
I installed it on a Black Frame with a Red color.
It's been about 3 months now, and the ProtectorBody seems to be fine, but I haven't done any Dirt running or Hard running at all yet, but the Rubber to fix it to the Frame (?) was degraded and Crack was found in it.
I pulled it lightly with my finger, and sure enough, it snapped. I looked at the other fixed points and found a similar crack on the rubber. I checked the other fixation points and found a similar crack on the rubber.
At first, I went to Home center and got an O-ring of about the same size and replaced the one that was cut off.
I wonder if it is the heat? If it persists in the future, I will consider another fix.
View detail
Cheap insurance
Mount feels very sturdy, mounts up super easy, . I'm stoked on the look and the protection.If you can take your front tire off, then you should have no issues installing this thing. It looks great and gets the job done. Once the mounting kit is on, cover replacement should be really easy if needed. Mine has taken some dings, but has held up well and still looks great.I'd recommend a lil loctite on the bolts that hold the plastic on. View detail
Fits: YAMAHA WRF 250, YAMAHA WRF 450, YAMAHA YZF 250, YAMAHA YZF 450, YAMAHA YZFX 250, YAMAHA YZFX 450
Great replacement slider
This was a very easy install. I read a lot of this about hearing it to stretch it to fit, not the case at all for me. This bolted right up and adds a touch of color.Fit and finish like OEM as far as I can tell. I picked up a bolt on the road and it ate up the stock one. This one fit well and seems to be durable. I've used it for 100 hours with no visible wear yet. It seems to be made out of the same material as the stock one. View detail
Fits: KTM SX-F 250, KTM SX-F 350, KTM XC-F 250, KTM XC-F 350, HUSQVARNA FC 250, HUSQVARNA FC 350, HUSQVARNA FX 350, GASGAS EX 250F, GASGAS EX 350F, GASGAS MC250F, GASGAS MC 350F
Great engine protection !
Excellent protection, not only protects from falls but keeps boots from scratching case covers.these puppies fit beautifully. They offer great protection all around and have saved my clutch and ignition covers from some serious damage. The only issue I had with them was on the clutch side it hangs out a bit further so i had to buy an extended brake tip so I could actually hit my brake. Doesn't fit over my Ktm slave cylinder guard so I trimmed the plastic around it and looks and fits great. View detail
I think it's good
I did customize the Handlebar area.
I replaced it because I miss the Rear area.
I had no intention of replacing the Chain Guard.
Chose Black.
I think it's moderately good
View detail
liked it
The Handlebar area is now finished.
I miss the NORMAL feeling around Rear.
The exchange was made.
A small change gives a different impression.
I love it
View detail
170cm, 65kg The size of the clothes seems to fit perfectly.
The finish is good compared to the price, and the protector has elasticity, so it feels good to wear. If you wear shorts underneath in the summer, it will be very protective. View detail
Material:Plastic Merit
Second Type Model (8BK-MD47) I chose this one because I didn't want the Gold's to look like an armored car.:I was able to use my new car purchase points from webike, so I was able to purchase it at a reasonable price. The installation requires a little bit of hang to fasten the screws while pushing the plate in, and it is necessary to remove it when changing the oil, but it is not too difficult since it will be removed when washing the car anyway. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
Protection as expected
For Off-RoadBoots, I bought it because the Frame is damaged.
It looks cheap when viewed on the Single Body, but when installed, it does not bother me.
I chose Silver because the Frame is Silver. I hope the Tie Wrap is also Silver.
The work is easy to do.
View detail
Frame scratch prevention
I bought this to prevent the Frame from being damaged by Boots.Color to match the Frame Collar:The base color is Gray, and the Grip is Black with a non-slip material fitted, so there is no discomfort when wearing it.
Installation is easy and the Right Side (Brake Side) The "Others" method uses only one NORMAL screw, while the "Others" method uses an O-ring that is turned on the reverse side of the frame and hooked onto the Protector's mounting hook.
I think it would be best to warm it up with a Dryer or similar to match the curvature of the Frame.
Grip by Boots felt easier, and it was also good to prevent damage to the Frame.
Mud and water can get between the Frame and Protector, so it looks like it should be removed and cleaned periodically.
View detail