Reviews
Quality not commensurate with price
To be honest, I can't say that the QUALITY is commensurate with the price.
The Screw holes do not match and the Bolt that comes with it is obviously too short.
The screw holes were not aligned, so I installed it forcibly, and the Crack was easily inserted.
Well, it is a handmade product, so accuracy may not be a problem, but I thought I would never buy A-TECH's parts again.
View detail
The atmosphere changes considerably.
STD Shape is good, but it's nice to have Arrangement as effective as this! It's presence is unbelievable.
If only we could manage the delivery date.
View detail
Isn't the error too Large?
The mounting holes did not fit at all, requiring considerable modification.
Seat baseRight rear hole extended to the Level where Washer is not available.
Therefore, I have been pondering various methods of fixing Bolt.
The base of the pedestal must also be machined considerably, or the load on the Seat Cowl will be Large and I think it will crack eventually.
I think it will be very scratchy, so if you can't separate the two, it is safer not to do it.
View detail
CBR1000RR-R SP Slider
When I received the product, I thought it was too large and the design was not so good.
Once installed, it fits the car body and is quite good.
View detail
Large is Small in size but
The best part is the use of Carbon.
It is much smaller than most vessels (about half the size of a mosquito coil), but I think it would look good as a mere ornament.
One point. It is so light that I worry if the vessel will move in the wind.
View detail
Cannot be pontoon-mounted.
The design is excellent, but installation requires shaving the body and widening the holes to fit the car.
This time it is Carbon, but the FRP one I bought before could not be pontooned.
It is an Exclusive Design product and not a cheap one at that, so I wish they would think a little more about it.
View detail
Fits: KAWASAKI Ninja 250
Parenthesis is great! Quick fastener is the best!
First of all, I chose to purchase this product because I wanted to make something that no one else would wear and Parenthesis looked good! I chose this product because I wanted something that no one else would wear. This product is made-to-order, so when I ordered it, the delivery time was supposed to be about 6 months, but I was surprised to find out that it actually arrived about 4 months early! ninja400 (ex400g) I installed the bracket on the front cowl of my car, but the front cowl stay seemed to interfere with the front cowl and would not fit properly, so I dropped off a used bracket at an auction site and cut it down to use it. (If I do it right, will I get hooked?) Although it is less strong, it is good because it can be attached and detached without stress. (to be reinforced later)
A quick fastener is also included for immediate maintenance.
Also, in my case, it is intended for public road use, and this product is made for Race, such as Light, Blinker, STAND, etc., so I have to modify it by myself in various ways.
This product seems to be basically for people who install it while processing it themselves, so if you're not very good at it, get a Shop or someone knowledgeable to do it for you!
Good points
Cool! (Cowl shape is different from OEM)
Air duct is attached. (Parts sold separately are required.)
The quick fastener makes maintenance easy.
Handlebar can be lowered and placed under the Top Bridge. (I use sniper Separate Handlebars sold separately, OEM Handlebar not tested)
It looks like a works machine because it has an Under Cowl.
XX Bad Points
Processing is required due to a certain amount of BALI.
RearCowl, Screen, Meter Pedestal, and Air duct sold separately
There are various places of interference when installed as OEM. (It's for Race, so it can't be helped.)
I feel like I've said a lot of things I want to say, but in closing, since this is a made-to-order product, A-Tech and Webig worked well together in confirming delivery dates, answering questions, and handling additional processing, and they responded smoothly.
View detail
My Motorcycle!
At first, I thought that some modification would be required for installation, but it is almost the same as OEMParts!
The work took about 10 minutes One Side, was well packaged, and the items themselves seemed to do a good job.
View detail
It is the best texture
I purchased the Dry carbonMODEL. It took about half a year for delivery, but the quality of the product is excellent, as expected from A-TECH, and it is very beautiful. Compared to normal fenders, it is very lightweight and the shape is very parenthesis. View detail
Quantity:Pair (for Left and Right) The design of the "M" is excellent!
There are well-designed Fenders from other manufacturers, but Quantity:Pair (for Left and Right) This is the only design that can cover up to the Swing Arm of the
The delivery time was six months, but I had waited eight months before, so I was prepared for that, but it was delivered in one month!
Parts accuracy is also fine and can be installed in less than 5 minutes.
View detail
![[G310SS] Complete Kit for Race](https://img.webike-cdn.net/catalogue/images/58717/BM31175_01_TS.jpg)
BMW G310RFull Cowl for Race
Design with S1000RR as Motif is Parenthesis good.
The top speed, which is comparable to the non-cowl G310R with matching fuel condition, is considered to have good aerodynamic characteristics.
Of course, it is also good where the Style is different from NORMAL.
The feel of the ride is also different.
However, there is no detailed instruction manual on how to install the bracket, and the Upper Cowl Bracket is particularly difficult to install.
If you are not confident, you should ask Shop for help.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
A-TECHG-Guard
I installed it on my GSX1300R HAYABUSA just in case. It is a product that I do not want to be indebted to. View detail
Cool and surprisingly practical! Would be great if it were a little cheaper lol
I often have to pause my motorcycle on dirt roads when I take a break from touring. I used to use empty cans, but they don't look good and they make me look like I'm littering garbage. It is very practical.
Of course, unlike an empty can, it's pretty hard, so no worries about the body sinking while parked on a dirt road! And it's light! This is a recommendation!
View detail
It is a very light Fender.
First of all, it should be noted that the Front Fender of the Z900RS is difficult to replace unless the Wheel is removed.
If you plan to do the work yourself, we recommend that you prepare to remove the front wheel by removing the front stand or other means.
As far as I know, this product and Moto Corse's Front Fender are the only ones that are integrally molded.
The one-piece molded Fender has large parts, but it is made of dry carbon, and although there are individual differences in the HandLayer, the single body weight is only 168 Grams.
However, the Gold Bracket of the Brake hose is surprisingly heavy and the Quantity:Pair (for Left and Right) In total, the Fender was 212 Grams.
Fender in NORMAL is 338 Grams including Bracket, resulting in a difference of 126 Grams.
In my case, when combined with GALE SPEED TypeE, the effect of weight reduction under Spring was 880 Grams for Wheel and 126 Grams for Fender, which is just about 1 kg Gram.
I don't know if it is possible to compare the effect on public roads with certainty at my sensitivity Level, but if I follow the textbook, it would mean that Large strange effect should be obtained.
Finally, the Bracket of the Brake hose is supposed to be reused by destroying the Rivet, but even if you buy a new Bracket, it is only a few hundred yen for new Parts. it is recommended to use a new Bracket to avoid Wound, injury, and other unnecessary Risk and Stress.
View detail
The coloring is good and it seems to be durable.
At this time of year, if you warm it up a little, it will stick nicely.
Perhaps it is also durable.
Seat is available in a variety of sizes, so it can be placed anywhere.
In my case, especially the Large size is too big for me …
View detail
ApriliaRX125 The one and only Rear Carrier
Although the Carrier is delicate, it is fixed to the car body at six points, so there is no need to worry about its strength when the Small TypeBox is installed.
The beauty of the form that follows the body of the bike without losing the flowing, radical design of the RX125 is nothing short of superb! This is a very important point because most of the people who choose this Motorcycle are in love with the Motorcycle's design and buy it!
The only problem is that the paint film is thin, so if hard objects are placed on it or it is stored exposed to rain, it will rust quickly.
However, it is the one and only Carrier for ApriliaRX125, and I think it is a good product that I can confidently recommend to all RX125Owners, including its designability.
View detail
Carbon has a nice texture, but ...!
The quality of Carbon is good and luxurious, but as you can see in the image, Tank's Quantity:Pair (for Left and Right) There is about 1 to 2mm of float in the part of the Curve of the I wish it was a little fitter. View detail
The shape is novel!
I like the innovative design of the fins and the integrated design!
The construction is beautiful and the fittings are fine.
However, since I frequently detach and reattach cowls, parts that could previously be detached individually have now become one part, which is a bit large and strange.
Furthermore, the fins are connected to the center cowl, making it a pretty big one part lol.
View detail
Well worth the wait and done very nicely.
I ordered this tank pad more than 4 months ago and was informed of the long wait but it was totally worth it.Quality of the carbon work is done exceptionally well.I will plan a time to clearcoat it before installation tp give extral seal to the carbon fiber.The fit is almost perfect and some urging will be needed for a perfect fit.It will look fantastic on the bike. Excellent quality from A-Tech! View detail
Black for a sense of unity
Tandem Footpeg for CBR600RR (PC40).
Rear brakeReserve tank is white in color because it was removed.
Installed to stand out.
The entire color scheme was unified in Black, giving it a tighter look.
It was good
View detail