Reviews
always having one's own way
A permanent fixture in the toolbox, very useful when diverting Throttle Wire, etc.
If you have this when processing inner wire, you can use it to make a large wire without having to pour in a solder and shape it.
We use a powerful Screw lock agent in conjunction with it, and we have employed it in several of our machines and have not experienced any Trouble at all over the years.
If you want to be sure, it would be better to use the Solder to handle the items, but even if you don't go that far, the items are convenient enough for beginners to use.
View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
High Quality and low cost
these steel ball bearing look same as OEM. Buy with confident because IT'S MADE IN JAPAN.. My TW200 had 70k Kilometers done. I replaced my bike ball bearing at 40000km,after that never touched the bearings still handled perfectly.Oh well. Do em , do em right; shouldn't be a problem for a long time. …..I bought two set of ball bearing for my future reference.'love it View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
Non genuine but they are ball bearings
As I was already replacing the old worn parts for the foot rests, I decided to go for these non genuine ones as they are just ball bearings and I needed a few. Very well made, exact to specifications. Packaging was adequate, shipping was fast. Well done and thank you View detail
Compatibility with Windshield
https://www.webike.net/sd/21402188/
I managed to put it on with the LE-13Windshield from Asahi Windshield.
However, the dimensions are limited, and the mounting direction is limited to backward.
View detail
It's not just about looks.
I thought it was completely custom in appearance, but when I fell down on a forest road, it spun around and prevented me from breaking the lever.
I think it can be used in Motorcycle other than Off-vehicle as a countermeasure against lever breakage of standing fall.
View detail
![[Replacement] Pivot Perch FP / Bolt Set](https://global.webike-cdn.net/uiu/impression/202209/19_1022257_63280175d7e1f.jpg)
Zeta replacement bolt set
Zeta replacement bolt set for pivot perch replaced, the feeling was good like new! Not difficult to install, easy as ABC. View detail
Great OEM replacement
Solid replacement to OEM. These provide visible cushioning that is felt while riding. The material is also not chewable. It is very sturdy and stylish. Looks beautiful. The shipping of webike arrived in 10 days, incredibly fast. Beautifully packaged. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
processing
Some vehicles do not have long enough bolts, so it is necessary to replace them with longer ones or cut the spacers. View detail
Almost satisfied
[How is it used?
When you want to rest your Right hand on the highway
Was the one you received as per Image?
Image itself
How was your experience with it?
Expected
[Points to note]
nothing special
How did it compare to other products?
do not know
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Expected
It is only 45mm, but it is very effective.
Quantity:Pair (for Left and Right) Both are in use, but with almost no blind spots in the rear.
That was a good purchase
View detail
Bling look
I purchased this for my 2014 Honda 450 R and took me less than 2 minutes to install...worth it and looks great.Perfect bang for the buck to provide that bling look to your bike. View detail
Fits: HONDA CBR250RR(2017-), HONDA CBR250RR(2017-)
Low price and quality
Installed on a vehicle competing in the CBR250RR DREAMCup.
Workability
Anyone can do it, just tighten one Bolt of m8.
If anything, it is a good idea to check for interference with the Wiring and Brake hose after installation.
Effects
The cutting angle can be reduced considerably.
Since it is a Racer, it must ensure Clearance with Cowl, Tank, etc. in terms of Regulation.
But when I adjust the Handlebar angle, lever position, etc., the MC51 immediately hits somewhere.
If you change the exterior to a race cowl, it's a little better, but you still have to cut it until it hits the stopper, and then you can cut it to the Upper or Tank.
It interferes immediately.
The advantage of attaching this product is that it can be adjusted without worrying about such interference.
I don't think this is a product that requires any other advantages.
Costco
Best. I bought it because it was the cheapest.
I am satisfied with the price, especially since there were no problems with the installation.
View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It exchanged together with exchange of a clutch wire. Adjustment was felt easy that it is easy to carry out a pure twist time.
It exchanged together with exchange of a clutch wire.
Adjustment was felt easy that it is easy to carry out a pure twist time.
View detail
It was quality.
It was quality. View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It purchases by a dress-up grade up.
It purchases by a dress-up grade up. View detail
Protect Grip
Grips are consumables. They wear out unexpectedly. You can replace the grips when they wear out, but the cost of a grip heater, an OEM product of a European car, is high. Therefore, Heat Shrink Tubes are used to protect them from wear.
For fishing rods. However, I am using this product, which is a Motorcycle product, because I am concerned about the appearance of the product.
To install, simply heat it up with a commercially available heat gun. The overall length is 105mm and fits snugly without cutting.
It may depend on the Gloves, but with the Gloves I use, I don't notice any slippage.
The grips are thicker, so people with small hands may feel some discomfort.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
ใส่มังกร้ของฉันแล้วมันดูดีขึ้นมากเลยทีเดียว ชอบมาก View detail
Qualtiy Clamp
Out from the box and installed it at my Honda CRF300l. Fits perfectly both sides (brake and clutch) and the plastic clamp serves its purpose not to scratch my new handlebar. Great item to enhance your bike cosmetically. View detail
Once used, it becomes a necessity.
Throttle operation should be smooth and proper play. If there is too much clearance between the diameter of the Throttle Collar and the Throttle Housing, or if there is too much clearance between the Throttle Housing and the Collar, this product can reduce the rattling. In addition, the friction reduction effect of Teflon makes the movement smoother and makes riding more enjoyable.
I think it is a good product because the effect can be seen at this Cost.
View detail
Shorter than expected
I have a HURRICANE:V Blade Mirror TYPEII on my WR250X.
Rear visibility was fine, but the Mirror was almost directly above my Left hand, and it was hard to get a "Yaaaay! I bought it because the Mirror was almost directly above my left hand, and it was hard to do "Yaaaay!
There are 30 and 45, but I chose the 30, which was a little cheaper, without taking measurements, thinking there would be little difference.
When installed, it is shorter than expected.
I regretted a little that I had not measured properly, but it was a little easier to do so, so I guess that's OK. is a little easier to do now, so I guess it's OK.
Note that Cap is not included.
I have driven about 1000 km on commuting, mountain passes, and highways, and so far there has been no misalignment or rotation.
View detail