Reviews
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6
To Protect Large-Sized Parts
I think the best choice for a radiator guard is the Yamaha OEM
Here are a few things I noticed during the installation
?Cowl only needs to remove the Left
The shape of the Sponge is different from that of the Radiator guard I wasn't quite sure where to put which one
On the ?Left, there is a Line, but the Guard is just between the Radiator and Line come in
?Quantity:Pair (for Left and Right) The top is fixed with Tie Wrap There is a hole of exactly 5mm square wrap around
View detail
Fits: YAMAHA STRYKER 2012, YAMAHA STRYKER 2013, YAMAHA STRYKER 2014, YAMAHA STRYKER 2015, YAMAHA STRYKER 2016, YAMAHA STRYKER BULLET COWL 2015, YAMAHA STRYKER BULLET COWL 2016, YAMAHA STRYKER 2011
Good product
Fits the 2015 XVS1300CU
When using Saddlebag Support in conjunction with it, the longer (100mm?) You might want to get a separate Screw
When it comes to detachment, you can push in hard to get the Quantity:It's locked up after it's set, so you don't seem to have to worry about it coming off
The Key to be worn by the wearer, but it is not bundled with the Parts of Screw and Others, but is wrapped The shape of the key is The same shape as the XVS1300CU is the Quantity:It has 2pc, but of course you can't operate it with the boarding key
The Backrest Pad is described in the product description to the effect that it is sold separately, but it is in the picture Please note that RearLuggage racks are not sold separately and are not included in the package
View detail
![Flat Seat [XSR700(TM) Flat Seat]](https://global.webike-cdn.net/photo/impression/20/20ec2332fc1c207465765c3ceab338fdL.jpg)
Fits: YAMAHA XSR700
Japan Also comes with a car
For Seat only handling of Yamaha in North America is cheap for some reason.. I got on the 2018 Japan car without problem.
As Seat, Sponge is soft and comfortable to sit on, but the forward is narrowed down so it's a painful crotch to sit there.
View detail
![Tank Pad [R6 TANK PAD WITH SIDE ACCENTS]](https://global.webike-cdn.net/photo/impression/54/5418930ac97dfcb62ffb993e0ed7b1c7L.jpg)
Fits: YAMAHA YZF-R6
I can only evaluate Design
I bought it by saying Yamaha OEMAttachment in North America.
I also wrote in the overall review, but there was only good design.
I bought it twice, but it will be so damned immediately...
Next we will make it to other Tank Pad.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA STRYKER BULLET COWL 2016, YAMAHA STRYKER BULLET COWL 2015, YAMAHA STRYKER 2016, YAMAHA STRYKER 2015, YAMAHA STRYKER 2014, YAMAHA STRYKER 2013, YAMAHA STRYKER 2012, YAMAHA STRYKER 2011, YAMAHA XV1900CU Raider
Design is good
There was only USYamaha's goods, and the details included in making it firm. Because it is Yamaha OEM Product, it will not break the whole Balance even after installation ?? Because there are not so many people installing it, it is Recommendation for those who do not want to be with other people View detail
![Tank Pad [R6 TANK PAD WITH SIDE ACCENTS]](https://global.webike-cdn.net/photo/impression/e9/e96cb17a4708660b66accfb083ae029eL.jpg)
Fits: YAMAHA YZF-R6
All for Logo
"R6" I bought it because it contains Logo.
I am self satisfied, it seems bigger Size than the Universal Product, there is also thickness.
It took a little bit of time to delivery,
It is expensive if considered ordinarily, but well "R6" So it can not be helped.
View detail
Fits: YAMAHA Bolt C Spec, YAMAHA Bolt C Spec, YAMAHA bolt, YAMAHA bolt, YAMAHA bolt, YAMAHA SCR950
OEM Parts, though - - -
Well, it's Bezel of Plastic.
That's it..
OEM Parts Why is there no problem mounting.
However, OEM Plating seems to have higher cost (Lol)
Speaking of the Bobber style, it is said that if you do not collapse light objects like Plating.
Well, could not it be made with this Gold genus?
At this price I thought that the plastics' green body, Matte color is good,
There is nothing like luxury, like a mini car Dashboard.
Plating using NORMALPlating without cheering was also incompatible with discomfort,
This is full of Tsukkomichi.
Something, I did not want a sense of lump of iron in Mechanical.
If you make a mistake with Bobber it will be just boring.
For me, I do not care about texture,
I only heard about impressions that I just finished.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
The price is high Neck ...
Purchased by saying that it is unavoidable that the price is high as it seems that the appearance of Single Seat is Race ish. Because it is OEM, it is satisfying without installing and feeling uncomfortable. Just hexagonal and fixed so remove etc. It is troublesome ... View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6
It took a little delivery
It took delivery for about a month, but I am satisfied.
It is customization that I do not know until I do not look into it, but I am satisfied with the logo of R6.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6
It is a delicate place for OEM
OEM Product purchased thought that Lescense of Mesh etc was taken into consideration.
I feel the installation bites Bolt under the Radiator and fix it with Tie Wrap appropriately on the Radiator, but you can not install it unless you remove the Side cowl.
Size is slightly smaller than the Radiator, both the top and both SIDE are exposed a little.
Small It is a translation attached to prevent winding up rocks and giving Radiator Damage, so considering the width of Tire and Fender etc, I think that the top and both ends are unnecessary, but if this degree is high I think that it was not necessary to turn it into OEM Product.
Rather it may have been better if there was a Type that seemed more likely to be installed at the Other Company Product ...
But even if it is installed there is nothing to complain about in particular.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
Great way to add some bling to your bike!
I bought a silver set of these swingarm pivot covers for my 2016 matte gray R3. They install just by pushing in to place as they have an “o” ring which holds the piece in place by friction. They look great and match with the other oem dress pieces that I purchased: silver bar ends, silver engine guard, silver nut for triple tree, etc. Quality is excellent, as would be expected when purchasing a Yamaha Genuine part. View detail
![Tank Pad [R6 TANK PAD WITH SIDE ACCENTS]](https://global.webike-cdn.net/photo/impression/5e/5e3e2b5463b2469310891459758b6ec8L.jpg)
Fits: YAMAHA YZF-R6
The price is high, but the highest Fit feeling
Punipni with Carbon Style Fit feeling is highest with a soft touch. If the price is a bit cheaper ~. Silicon-off taking Tank's oil quality and Alcohol are not attached. I need to prepare in advance. View detail
Fits: YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300
OEM So the function is fine.
MT09 for Racer, purchased with Side Case, OEMBracket. There is no stock in FOR JAPAN MODEL only for this product, it took 3 weeks to be ordered. Yamaha Motorcycle GR50 and MR50 which we used to ride have a memorable key in common with them, and I remembered the old days at first.. The function is fine, but the delivery date and price are a bit more, is not it?. View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A
It is largely satisfactory
MT 09 Racer used for 2017 MODEL. Although the notation of conformity was the notation with up to MODEL 2016, it was able to be mounted without problems. Case has a double structure and rigidity, it is made fancy. That price is expensive, but USYamaha's products are a little less expensive than for FOR JAPAN MODEL. View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300A
As expected, both OEM and Fitting have good effects.
It is made by USA Yamaha, but it seems to be the same as for FOR JAPAN MODEL WY GEAR. As expected, OEM, Fitting was not a problem at all. Compared with FOR JAPAN MODEL items, the price is also cheap and the function is the same, so it is Recommendation. View detail
Installation is required
Standard ones are too thin. When you stick here it becomes very easy at the time of standing. It feels good because I am stepping on even my usual running. View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300A
Large changeable satisfaction
Exactly the same thing as the FOR JAPAN MODEL OEM Product? I've looked at the comparison and I can't see the difference.
But the price is almost half the price.
The delivery was delayed due to the importation, but the price is so low that it's not a problem at all!
My car is using the FOR JAPAN MODEL, but I was able to install it easily.
View detail
Fits: YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300A, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300
Large changeable satisfaction
FOR JAPAN MODELOEM Product exactly the same thing? I compared it but I do not understand the difference.
But why is the price close to half price?
Delivery was delayed because of imported goods, but the price is cheap so there is no problem at all.
View detail
Fits: YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR450F
Reliable feeling is wrong
Purchased in the Bonus period by being killed by fever.
Installation is a pon.
We have more weight than NORMAL, but the place is a place, so I do not feel the weight.
Even when a stepping stone from the front wheel hits the KitPlate during Dirt traveling, there is little reverberation, and it is toughness that is not particularly hurt.
However, the price is high. Wonder if it is already 5,000 yen lower.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider
Radar's Backrest must be this
In Japan, it is not sold sadly. Attachment of Stock.
However, it is called weight feeling, it is called texture, there is a good reason not to say anything.
I also confirmed the Other Company Product, but again, I feel that YAMAHA does not correspond to OEM Parts.
View detail