Reviews
Cospa good
There is no problem regarding disposal of waste oil for motorcycle use. View detail
It is now one of the Items required for Oil Replacement!
[How is it used?
I purchased this product to be used once a year when changing Oil.
It is less than 4 liters to replace Oil in CB1100, so it is enough for your needs.
How was your experience with it?
It can be used without any problems. It might be easier to use if it were a little thinner, laying on the bottom, but it never didn't fit.
Oil absorption is also absorbed to a level that is not a problem after a while.
How did it compare to other products?
I think they are comparable to Emon's. I appreciate the Vinyl gloves, but I wonder if that is reflected in the price.
[Points to note]
Those who normally perform maintenance should have no problem at all.
If you are not familiar with it, you may shake it and spill the oil when you take the last bit of oil out of the body. It might be easier to use a more shallow bottom and Large size.
I think it is inevitable that not only oil but also other products like this will increase in price due to the rising cost of materials. I think it is better to buy in bulk to some extent.
View detail
To dispose of Oil
Oil replacement is easy but disposal of old Oil is Large strange.
LargeIn the past, service stations would dispose of it for free, but not anymore. However, it is completely OUT of the question to throw them into the sewage system.
For this reason, I used to put a Vinyl bag in a corrugated ball and fill it with used Dustcloth and let it absorb Oil.
The same logic applies to this product. At first, people around me thought I was crazy to pay Gold for such a product, but now it is always used for oil replacement.
There are a variety of absorbent materials thanks to the increasing number and variety of Manufacturers who produce them. Mixed-color cutting cloth and Color:Some products use Gray dust cotton-like absorbent material. WeBig's is a White absorbent material, so you can see the color of old Oil.
It is easy to use and comes with gloves and Tie Wrap.
Note, however, that the Garbage disposal specification changes depending on the region.
View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Large doubles as Small
I had a previous experience when I used the 2.5L to treat 2.2L and it did not absorb well and leaked, so I decided to use the 4.5L to give myself more room.
Thanks to this, we were able to handle the process with no problems at all.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail
Cost performance is nice
Tell us how you use it]
Used to replace Oil in XJR400R.
This time we replaced only the Oil, but we decided to use the Large capacity 4.5L just in case.
I purchased 4.5L because I was concerned that the last time I purchased a similar product, 2Type L, it had a capacity limit.
Note that if the size is set to Limit, the box will be too small and oil will leak out.
How was your experience with it?
The absorbent paper inside is like Dustcloth, so it absorbs the oil very well.
After use, dispose of it according to the disposal method of each municipality.
Included Parts:comes with Vinyl gloves and in-hemp palmock as
How did it compare to other products?
It is also available at Home center, but the price is cheaper here, so it is recommended to purchase it when adjusting the shipping cost of webike.
[Points to note]
It is safe to purchase a slightly larger size.
Large is weird when the ground gets dirty...
View detail
Waste oil treatment box
I bought them from Campaign, but it took about a month for delivery, so I bought 3 of them in bulk. View detail
I think you can go Limit.
Since the 4-liter version was temporarily out of stock, I bought the 2-liter one for the first time so that delivery time would not be spread out.
I was worried because I usually spill oil even in the larger 4-liter treatment box, but I only made the usual mistake of spilling oil on the lid, which leaked out of the absorbent bag onto the floor.
As for the amount of waste oil, it was about 2 liters, so there was no problem.
Even the smallest one came with a tie wrap for soaking up waste oil and tying it up afterwards, as well as Vinyl gloves, so that was a big help.
View detail
Compact!
Used to replace Oil in crf250l!
This was sufficient!
The excess oil was also poured directly into this area to fit!
Vinyl gloves and an in-hemp palmook are also included for easy work and cleanup.
View detail
Bags are sturdier than similar products from other companies
We used to use the same kind of waste oil container from A Fat, but it often leaked from the bag after a while after pouring waste oil into it.
Kochira's bags are sturdy and leak-proof.
The price is similar, so I would like to use this one for a while.
View detail
Buy in bulk for Oilfor Replacement
[How is it used?
Purchased for Oilfor replacement of PCX125.
How was your experience with it?
It is a normal, common OilPack! I'm glad I was able to use it without any problems.
How did it compare to other products?
I have used many different products and they all seem to be the same, especially the ones I have used!
[Points to note]
You should spread the bag tightly before replacing the Oil and be careful not to overflow.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
It is a classic.
It is a standard for waste oil disposal, and the Tie Wrap and Vinyl gloves included in the package are convenient. I would appreciate it if you could make it a little smaller and cheaper if possible. View detail
4.5L???
Although the label indicates 4.5L, even 3.9L of Oil could not be sucked up, leaving the Oil in a liquid state.
Is it really 4.5L?
View detail
I appreciate the gloves included.
Oil Treatment Boxes are all the same.
but this WeBigGarage Oil Treatment Box comes with work gloves (plastic bag gloves).
When removing the drain bolt when changing oil, it is necessary to wash your hands because your hands stick to the oil, which is a big problem!
View detail
Easy to handle
It's easy to handle after replacement.
I like the fact that it can be put out in burnable Garbage.
View detail
A little cheaper would be nice
Used for Oil and Filter replacement on VTR250-Type LD. It was difficult to use due to the narrow clearance between the ground and the oil pan. The capacity was enough, but the absorption was not so good because of the Dustcloth inside. I wonder if it is possible to make it with the same capacity and a little height. View detail
Can be disposed of in combustible Garbage.
It is best to dispose of it in burnable Garbage.
For those who do their own maintenance, waste oil disposal, etc.
It's a hassle.
View detail
Used in Oil Replacement
The product is as good as it looks.
Basically, OEM type Oils do not have Nozzles on the Bottle portion, so we use them in that case.
It is neither particularly good nor bad.
As others have said, it seems expensive to say it is expensive.
View detail
The height of the box ....
I purchased this for Oilfor Replacement
The height of the box is there, so make sure the Drain is in the right place.
I think Oil will spill if you don't decide.
Tie Wrap to hold the bag and Vinyl gloves are good.
I think I will continue to use it.
View detail