Reviews
I think it's good with no leaks
I've been using the cheap Oil Jug, but I couldn't stand it because it was leaking from the seams I bought this product as a replacement The feeling that I used it is not so bad It is a good idea to use 4 liters because it is a large capacity I think it's good and easy to use when changing the oil in the vehicle It also has a lid, which is a nice feature because it prevents foreign matter from entering the vehicle View detail
The lids come in handy.
I bought a jug to replace the Oil at home.
I bought one with a lid to prevent dust from getting inside as we store them in a storage room for a long time.
I think that the use is not so different from other jug. I have a 750cc car that is not too small and changes almost 3.5 liters, and I was able to replenish it twice. It was.
The oil spout is a bit narrow, but it was perfect for oil filler. But it takes a long time to get into the small and small size of oil filler when the clay is high.
View detail
How do I clean it?
All of these things may be similar The spout of the Oil is Wide mouth and absolutely no spills There is a plastic mesh on the inside to prevent Garbage from getting in There is also a screw cap on the pour side, so you can leave your oil in and pour it out It is suitable for use as an add-on to a product
As for the feeling of use, it's not too much or too little However, I think it is the fate of this kind of jug, but I have to say that it is not a good idea to remove the oil from the container after use I have a problem with this Especially the Oil that got into the bellows is hard to find in KitchenPaperetc I can't wipe it off First of all, I used Parts cleaner in Jerzya to remove the oil When you leave it with oil on, you can use it immediately It's going to be gone
View detail
large is more convenient for jug
It's a jug for oil, but it's a mixed gasoline for off-road motorcycle as a jug for putting
The drawback is that it is difficult to remove the lid, but it is easy to pour a certain amount of size, easy to pour, and proper The scale of the package is marked on the front, so it is easy to determine how much is in the package I think it's a controlled product
View detail
Oil changes are a breeze!
So far, if you buy a 1L can at We-Big, it comes with a Nozzle, so you can use that to get your Oil I was pouring
But if you want to use up a 1L portion, it's fine, but if you want to subtly pour 0.3L or so, you can use a Large body The replacement process was not so neat because I was doing it
So, unusually, I bought a 4L can of Oil Jug to go along with my purchase of a 4L can
I bought the 1L Size because I thought I would have trouble finding a place to put it if I bought a large size
As it turns out, you bought it and you were right, Large!
You need to transfer it every time, but you can measure and pour exactly what you want while looking at Memory So you can keep the right amount
It also has a handle, so you can't accidentally let go of the can and let it become a Large disaster It can be prevented
You can prevent Garbage from entering inside because you can put a lid on it after use, and you can safely It can be stored in the warehouse
However, there's nothing to block the Nozzle part, so if you're worried about it, you can get it on the tip You might want to do something like packing Dustcloth
I pack PaperDustcloth
I will continue to use it
View detail
I guess that's about it
The CBR250RR (17’)
Used to fill with oil
The 1L scale is about right
2L is pretty much less than it actually is
CBR's Oil Mouth
Hose is thick and a bit
I spilled the oil
View detail
It's unstable in the sky
If it's empty, it's easy to fall over and unstable
It is uncomfortable if you have to roll over while working
I'm sure it would take this much Nozzle length to inject the oil, but the jug itself It is light and must be placed carefully or it will fall over
View detail
oil change
I bought this to change the oil myself It's comfortable. It's a good product. The oil is supplied by the manufacturer of the bike. When the oil filter is exchanged on the manual, the amount of oil is determined when not exchanging oil. Therefore, accurate measurement is required. It's a nice product. translated by Google Translator View detail
Easy to use
I've tried using Kosciami, but it's very slow to drop (lol) If you use Oil indoors instead of outside, you don't need it Other than that, Large wood and Nozzle thickness is moderate and easy to use View detail
It has a memory with 200 increments
I bought it to replace the Engine and Defferential oil
Memory is easy to adjust because it is included in 200 increments
It doesn't have a lid, but you can clean it with a parts cleaner when you use it
I recommend it because of its low price
Since the mouth is small, the Coolant liquid can be refilled or replaced
View detail
Oil change essentials
my jug is old and I am replacing it There is a lid on the end of the Nozzle as well, so you can use it when you are not using it I like it because it doesn't get Dust in it View detail
It is attentive product
I bought it to Oilfor Replacement of Small Type Motorcycle.
I used it until now because Memory was 200 mml increments so I was looking for 100 mml increments and purchased this item.
Exchange Oil 1. Because it is 1L, 100mml increments are very easy to use.
Nozzle is longer than ever, but because it is higher than 1 L Memory, I pour it with confidence.
A lid is attached to the pouring spout and the large mouth but I'm happy to prevent dust at the time of storage.
Nozzle It is easy to fall over in the long and empty state, so be careful.
View detail
Normal good
Because I used it for the first time, I can not compare it with others, but it was comfortable because it entered the necessary amount at the same time.
Because it is with a lid, is it easier to store compared to without lid.
View detail
Large doubled as Small
Until now I put Oil in 2 L jugs in 2 times, but I gradually became troubled and purchased Large Yu jug so I can do it only once
Oil Jug also seems to be evolving, so Cap of the pouring spout has been changed, and what was connected by TagPin was formed as one piece. Thanks to that, it is easier to turn and easy to remove. The lid is unchanged and it is connected with TagPin
Although a net net is also attached, if the eyes were small or transferred Oil, it did not go down at all and it overflowed. We tried two kinds of viscosity of Oil, 10w-30 and 10w-40, but the results are the same
I put 4 liters of jugs of Oil and actually poured it, but it was heavy and I could infuse the last drop without being tired of arms. If you dare to give up the difficulty, since the pour spout is also getting bigger in proportion to the Large size of jug, it is hard to pour out a little if it is in Small Motorcycle
View detail
It is better to have a lid
Oil Jug is used only a few times a year so it is mostly placed in the crib, but where the dust and Oil Sauce are concerned.
Since it has a lid here, neither mixing of Dust nor Sauce of Oil is worrisome.
Regrettable place where Memory has only Liter unit.
Oil Filter Since fractions are given at the time of replacement, at least it is necessary to scale by 500 cc increments.
We measured with Measuring Cup and wrote it with Magic pen.
View detail
On a par with evaluation
The jug I am using now is more than thirty years old, I tried replacing it because the network net can not be torn. Certainly the netting network also plastics, I think that it is kind of thing. The mouth to put the Oil is also Large, I think that I want to use it forever as it seems to be strong as it is. View detail
Oil exchange more optimally
I have been exchanging Oil without Oil Jug so far, but I put it in and purchased this time because it was troublesome by checking the amount.
Because the Large is 1 L, we do not take up the space, so we can also store the lid so storage is perfect.
Because Memory is also fine, it is also good for masters.
View detail
Nozzle can be capped, dust will not enter
With lids on both mouths, I tried replacing it because it is easy to store without dust.
Although it is natural, there is no problem in refueling.
Nozzle is long (It seems that it is in common with the large capacity of capacity) Therefore, refueling is easy, but Nozzle is heavy, when it is empty, even a breeze falls down.
Since Nozzle is a division type, there is a concern that it will deteriorate and be broken if it is kept under the condition that the ultraviolet ray hits the Black base of Screw part.
There is a Mesh filter inside, but there is no point if it is for refueling, since Oil falls slowly, it is irritating.
Hinge formula is easier to use because the top lid is better, you want the improvement.
View detail
Jug is good KITACO!
Poly made Oil Jug think that KITACO is the best.
I bought it because I did not have 1 L Oil Jug. Until now I have used 2L jug, but with a small amount of weighing it is still inconvenient.
Why did not you buy it sooner?...
I saw a variety of other companies' Oil Jugs, but I think that KITACO's Oil Jug is the best.
View detail
Easy to use in 100 ml unit display, easy cleaning up!
I purchased 1LiterSize.
The reason I bought the most is because memory is waving in 100 ml increments, it's easy to use for SmallEngine Displacement Volume cars.
Filteretc at the base of Nozzle so that Garbage does not enter as an attentive function. Although it is equipped, whether it is honest or not, it seems to be somewhat concerned.
It is time to finish work and finish what I felt rather surprisingly better than ease.
- Cap comes in front of Nozzle and it can be attached when you finish using it.
- Cap is attached to the jack's large mouth, and here it can also lid.
With this, Dustclothetc. It is not necessary to substitute lid so that Garbage does not enter at the next use.
Also, do not have to be careful about placing jugs so that Oil does not get around when storing and storing.
It is a bit of a problem, but after finishing work, it is unexpectedly troublesome to clean the jug by making the container used cleaner to some extent.
Although it is refined to people, I do not do surprisingly to prepare a lid separately.
If the lid is attached like this item, there is no worry that Garbage is in use next time, hands will not get dirty, it will be taken care of Smooth without concern for placing place (Lol)
View detail