Reviews
Good with this hand goods
It was attached to xr 250 before. First of all, Material : Rubber is good but Length is insufficient After 2 centimeters long it is good If it may be unavoidable on the material, but if you use it
Rubber twisted, so I used it a lot and lost it
Currently I use Silicon tube but this one is pretty good. I think that it is good as a product of this hand to those who are said to be not dedicated.
View detail
I also added it to PCX of delivered today.
Even with Grip heater attached, even with Hand guard or Warm Gloves it installed because Lever's coldness is transmitted.
It seems that it comes from various Manufacturers, but KITACO seems to be no mistake and it is likely to come soon.
PCX is OEMLever, but the other CRF is being replaced with Lever's Lever, but if it gets soap or spraying it will somehow go in.
Do not twist it!
View detail
As expected
I got cold soon so purchase. Even if you do Gloves for winter, it will be introduced from this year as the fingertips will cool down. Although it is not so cold yet, after all it was good to buy it because the fingertips will cool with Lever.
However, although it is natural, since Lever becomes thick, the feeling of operation is somewhat uncomfortable. (It is acceptable range)
I think that it is cheap and effective.
What is wearing is easy to blow on PartsCleaner and plug it in.
View detail
Our Bird is - - -
Is it due to Combination brakes in the Wire formula?
LeftBrake is far and Right (Front) Brake is
Because it is close, when you do Brake both something Tiguhagu
Because it will become so, to compensate for it Right only
I installed it..
Neutral detergent + plenty of water, soaked in
Do your best and install it! It will be somehow ^ ^;
After attaching, even if I turn around, thinking to remove it
It has not been such a thing properly stopped
There is also softness of Sponge, so it is Brake
There seems to be no obstacle factor, so you can use it with confidence
It was cheap shopping ~ ♪
View detail
There is more effect than price
【What made you decide the purchase?】
In the midwinter the Left fingers were getting cold and in trouble.
【How was it actually used?】
The feeling of coolness from Lever decreases, and Touch does not feel uncomfortable.
【Was it difficult to install? (Hard parts case)】
I had a hard time installing it. I was prepared to look at other people's impressions beforehand.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I also prepared a Compressor, but in the end I just used a neutral detergent and water in Spray. As you turn it up, you go in and get in. If somehow we could attach one, we could do surprisingly quickly the second time. Work on a cold day does not recommend because Rubber will cure.
[Is there anything I was disappointed about?]
There is nothing special now.. I would be happy if the durability is good.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It will be in millimeters, but it may be a little longer.
【Have you compared items?】
I also have a Sponge type, but I chose this Rubber type considering Touch and durability.
[Others]
I bought Black because Lever was Black, but if you color it differently from Lever it will be Dress-up as well.
View detail
It got easier to grasp.
Lever is easy to grasp by installing it, and it will not slip again.
Because it has various colors, it can be used as an appearance Custom.
However, the installation is Large strange is Minus.
As a hang of installation, I first apply LETTER to LeverBody to make it slippery. Next, wind and grip Lever grip with Towel. Then you plug in Lever with your strength. I need familiarity and power, but I can not take it if I can attach it. Although it may slide with detergent at the beginning, please try as it will not slip if it dries.
View detail
![Stage 6 Brake Lever Grip [Orange]](https://img.webike-cdn.net/catalogue/14762/05312032_51a88a5d1ac0e_TS.jpg)
Improves ease of braking
Simple way to make braking much more comfortable when you're not wearing gloves、 on short jaunts on my scooter around my neighborhood. View detail
I regret to rip it - - -
I put it on the APE 50, expecting it to be easier to grasp.
As Instruction Manual Wet with water Challenge. OEM's Brake lever side was able to be installed somehow, but the Clutch lever of the Other Company Product was cracked as the bulge of Les Bar End was somewhat larger than the OEM, it pushed in and forcefully.
Making is solid (Strong) The installation is Large strange as you are doing. The Manufacturer's Instruction Manual that I repurchased was written to use a small amount of neutral detergent. You may have installed it with detergent.
The feel I grasp is somewhat stiff (I like preference for a bit more). It is stylish that Mukawa's Logo is included. I was not able to install it properly in my case because it was expensive, so I made it a lower evaluation.
View detail
The coldness of Lever becomes hard to be transmitted
Winter Spec. Mounting to make it.
By attaching it, the coldness of Lever became less overwhelmingly transmitted.
To say greedy, I thought that Lever touch would be difficult to change by making Sponge a bit more waisty.
View detail
I've been using a red sponge type one, but I felt like unifying the color to black and green, and so I bought this part.I can't compare it to my former one because the material is completely different.But it doesn't slip and you won't get tire
I've been using a red sponge type one, but I felt like unifying the color to black and green, and so I bought this part.
I can't compare it to my former one because the material is completely different.
But it doesn't slip and you won't get tired.
Your fingers will not slip even if you lightly apply the brake using the tip of your finger.
It will be a small decoration too.
It depends on your taste, but its performance level is what I really dreamed of.
The installation was quite hard, though.
Here's some advice.
First, you will find it difficult to pierce the tip.
You need to open it and press it in with both hands.
If you succeed that part, then you need to press in the remaining half, and then push up the upper half again.
That's how it goes. If you repeat this process it will fit in smoothly, I guess.
It won't move a bit if you try to press the upper part and the lower part simultaneously.
It says to refrain from using any solvents, but I applied some parts cleaner, because it didn't move.
There's no problem up till now.
Just apply a little and push the upper half, and then the lower half.
Finally adjust it to the place where your finger touches when actually applying the brake.
Though it was hard to install, I am satisfied with its performance for now I can grip the brake without slipping.
I also like it because the color has been unified to black and green.
View detail
Whenever it carries out Lever exchange, he is trying to certainly attach as improvement in a Touch, and protection of a Glove.purchasing, since a lever position becomes somewhat further in case of the Sponge type -- a Manufacturer -- although it is vario
Whenever it carries out Lever exchange, he is trying to certainly attach as improvement in a Touch, and protection of a Glove.purchasing, since a lever position becomes somewhat further in case of the Sponge type -- a Manufacturer -- although it is various, it is considered as a thing made from a Rubber certainly like these goods.It can ease, although the cold of the Lever of winter is not as a Sponge type, either, and I think above all that a feeling of operation becomes good in a completely different class.Although it is somewhat serious to let the swelling portion of a lever tip pass, attachment can be attached with a Smooth, if a Lever is wet with water.Saying that the Grease is stuck and a Parts cleaner is blown cannot be carried out to a rubber commodity (a Parts cleaner melts a rubber commodity.).a Gasoline -- the same -- it is -- since -- don't carry out by any means. View detail
Since the Lever was cold and disagreeable, it equipped with the winter season. Since the direction which does not have summer conversely feels cool, he would like to remove, but primarily, since the wearing itself is hard, removal is not expectable.
Since the Lever was cold and disagreeable, it equipped with the winter season.
Since the direction which does not have
summer conversely feels cool, he would like to remove, but primarily, since the wearing itself is hard, removal is not expectable.
Although it is
Aluminum shaving and has equipped with the thing Lever, appearance and a Lever touch are spoilt in putting this.
A winter season is certainly good also at
.
It is the optimal Items for a person more practical than appearance that makes the
Handle cover this.
View detail
About attachment, since it is somewhat tight, pains are taken to thrust, but a wearing feeling can be used satisfactorily. It is dramatically useful for the purpose of preventing a Lever sliding especially on a rainy day, and a feeling of operation
About attachment, since it is somewhat tight, pains are taken to thrust, but a wearing feeling can be used satisfactorily.
It is dramatically useful for the purpose of preventing a Lever sliding especially on a rainy day, and a feeling of operation becomes good.
A price also thinks again that it is a cheap Items with a sufficient Cost performance.
View detail
Touch also with handiness and the attached appearance sufficient [ a price ].
Touch also with handiness and the attached appearance sufficient [ a price ]. View detail
The way to which this product was attached individually thinks that it is easy to carry out operation of a Lever. Since it could be satisfactorily used still now although there was also time, such as rainy weather and open storage, for the about fiv
The way to which this product was attached individually thinks that it is easy to carry out operation of a Lever.
Since it could be satisfactorily used still now although there was also time, such as rainy weather and open storage, for the
about five years, but degradation had been seen a little [
], it purchased newly.
Isn't durability also rather good, considering the
Cost?
I think whether to be easy to equip with
attachment, if a Silicon grease is applied lightly.
View detail
Lever sponge which has been indebted whenever this season comes every year! although it will be clutch operation and the fingertip will get cold, if midwinter comes even if it has attached the Grip heater -- -- even if this pro
Lever sponge which has been
indebted whenever this season comes every year! although it will be clutch operation and the
fingertip will get cold, if
midwinter comes even if it has attached the
Grip heater --
-- even if this product has grasped the cold Lever --
-- it is OK.
enjoyment of a Motorcycle life is done by free [ from cold ] one by a
Grip-heater + Lever sponge
this year also!!
View detail
It attached to V-Strom and a DF125 DJEBEL in December, 2011. Since the Lever did not get cold, pain decreased to also carry out a Touring. I think that an effect increases by using the Items of such windscreens together since a Handle cover is attac
It attached to V-Strom and a DF125 DJEBEL in December, 2011.
Since the
Lever did not get cold, pain decreased to also carry out a Touring.
I think that an effect increases by using the Items of such windscreens together since a Handle cover is attached as for the
DJEBEL and the Bush guard is attached, respectively as for V strike.
a rent will go into the Clutch side of V strike in
, however March, 12 when the year began -- perfect -- use -- impossible .
The Brake side has also split in May.
Is the direction of the
DJEBEL because it is changing to the Short lever of DRC? For the moment [ ? ], a rent is not on right and left in since the frequency where it rides is low.
It compares and possibly did not suit the Lever of thick V strike.
It remains as it is, and incidentally V strike hangs a Cover and they are [ two ジェベs are located in a line on good terms, and ] unauthorized parking.
Seemingly, that will not be right although the direction of V strike which ultraviolet rays do not hit easily is likely to last long environmentally.
View detail
Pains was taken over attachment. Attachment is serious if soapsuds or the thing which does something a slide is not attached to a lever. The coldness of the lever was eased considerably. Since the lever merely became thick, it became slightly
Pains was taken over attachment.
Attachment is serious if soapsuds or the thing which does something a slide is not attached to a lever.
The coldness of the lever was eased considerably.
Since the lever merely became thick, it became slightly far, but it got used immediately.
I think that appearance is also good.
It is slightly expensive for sponge.
View detail
Cygnus X-SR for commuting (SE12J) was equipped. A winter season and metal levers are cold. The coldness of a lever can be eased if this lever sponge is used. Although the touch of a lever is not bad, also well, there is particularly. [ no ]
Cygnus X-SR for commuting (SE12J) was equipped.
A winter season and metal levers are cold.
The coldness of a lever can be eased if this lever sponge is used.
Although the touch of a lever is not bad, also well, there is particularly. [ no ]
It can do for fun in case of a slender lever.
In that case, it becomes easy to operate the taped direction.
Although I consider [ that it can respond to a lever authentic positive in each company, and ], wearing (insertion) may be difficulty at a lever and the lever of a large-size car with a larger ball of a part.
Although it is sponge with pliability, it will split, if it is strained since it is sponge after all.
It adds that it was not able to reduce, although the thicker heat shrinkable tube for coldness mitigation was incidentally used.
View detail
It attached to honda forza MF10. Although it soaks in a package with water and being attached, when doing just like that at first, since it did not enter at all, detergent for kitchen was thinned and used. It entered very well and still ran away.
It attached to honda forza MF10.
Although it soaks in a package with water and being attached, when doing just like that at first, since it did not enter at all, detergent for kitchen was thinned and used.
It entered very well and still ran away.
Since it is developed for motorcycles, die length and thickness are right just.
Since the lever touch also became light, the burden of the fingertip reduced in the urban area which has lever handling frequently.
I think that it is good also for protection against the cold of winter.
Since it is sponge after all, uneasiness is merely in durability.
When also considering the price as sponge, I thought slightly high kana.
Next, I think that it is looked for whether there is any same thing at HOMUSEN when purchasing.
Although it is parts conspicuous [ seldom ], it may be a fashion if it sees from those who see.
View detail