Reviews
Hose Clamps that Continue to Hold their Clamping Strength for the SP Takegawa Kits
About quality and texture: I am happy with the quality of the hose clamps from SP Takegawa. Made from a steel construction with an external diameter of 15 mm and an internal diameter of 13 mm. About the feeling of use: These hose clamps from SP Takegawa are very strong and continue to hold their clamping strength after being removed and installed many times. Products to buy together: Some 8mm clear breather hose from SP Takegawa would also be desirable to purchase alongside the hose clamps for you to be able to connect up to your catch tank. Difficulty of installation: The process to install takes just a few minutes for each hose clamp, I find the strength of the hose clamps too high to be able to fit by hand so use pliers to complete this. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a high quality material hose clamp at a fair price as compared to the lower quality material some brands use for their hose clamps that lose their strength over time. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: SP Takegawa offer their hose clamps in four different sizes but if different sizes are required then NTB hose clamps maybe what you need. View detail
Yeah, PetitCustom ♪
Isn't it pretty nice? View detail
Cylinder Head and Base Gasket Set for your SP Takegawa Big Bore Equipped Grom
About quality and texture: I am happy with the quality of gasket set from SP Takegawa, the base gasket is a paper material while the head gasket is metal. About the feeling of use: When it comes time to reassembling the engine after some major works a new set of gaskets is neccessary for the cylinder to ensure the performance is not effected by any leaks and these have done the job with with no issues. Products to buy together: Since the piston was removed for the major works then some piston pin c-clips would also be desirable to purchase along side this gasket set. Difficulty of installation: The process to install takes about an hour, you want to put the engine at TDC followed by removing the head and cylinder which will allow you to replace both gaskets. Clean the mating surfaces before installing the gaskets, reassemble and torque the head bolts in a criss cross pattern. A little difficult to do. Cost performance and comparison with other products: A High costing for gaskets but not ones that are changed regularly so the price can be considered reasonable and very similar to what you would pay for the same gaskets from Honda for the OEM bore size. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: This gasket seat is specific for the 181cc cylinder, a different gasket set is available for the 143cc cylinder. View detail
Handy Ring Terminal Lead to Ground Universal Accessories to the Grom
About quality and texture: I am happy with the quality of ring terminal lead from SP Takegawa made from a ring terminal, male bullet connector and small section of wire About the feeling of use: Makes connecting a ground to universal accessories like my temperature guage that is not Grom specific a breeze and there is no premanently cut wires if the accessory is removed in the future. Products to buy together: An electro tap would also be desirable to purchase along side the ring terminal lead so that a power can be provided to the accessory via the motorcycles wiring harness. Difficulty of installation: The process to install takes about 5 minutes, the accessory will need a female bullet connector fitted and simply connect the bullet connectors and bolt the ring terminal down onto a section of the Grom's frame that is free from paint for a good connection. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting two leads complete with connectors to save you the time preparing these yourself as compared to purchasing all the items individually which will be cheaper if you need numerous leads. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: This is a relatively short lead and if you are needing different lengths search grounding cable for many more options. View detail
Fits: Others , その他
Can be used without problems
There were comments that the Light was dark and difficult to see, but it worked fine for outdoor work during the daytime. View detail
13mm Hose Clamp from SP Takegawa
* About quality and texture, A steel spring clamp with a goldish in colour corrosion resistant coating, not silver in colour like the Webike picture. * About the feeling of use, These hose clamps secure the hose very firmly onto the mating receptical and I do like the clean finish as opposed to the screw type hose clamps that can look untidy once secured. * Products to buy together, Some new breather hose was purchased along side these additional hose clamps, I have moved away from the clear breather hose to the black. * Difficulty of installation, The fitting of these hose clamps is simple when using a suitable set of plyers, I used a set of mini multi grips with tape over the ends to prevent scratching up the coating as much as possible..The process was completed in 2 minutes with no difficultly. * Cost performance and comparison with other products, At just over $1 AUD each I find the pricing reasonable but the ones available from NTB can be had for half this price and I will gives those a try if I need more in the future. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, I can see that maybe using these goldish coloured hose clamps may not be very aesthetically pleasing when paired with the new black breather hose so if that is the case for yourself, Daytona offer these hose clamps in black. Use the product reviews to assist in making a decision on your purchase. View detail
I don't need it.
I could do without it.
I don't care if there is.
I can make adjustments without worrying about injury.
View detail
O-Ring 12mm
About quality and texture - Excellent quality, no issue with the O-ring. About the feeling of use - Great fit and functioning as intended. Products to buy together - Purchased together with ball bearing, product # 00-01-1011. Difficulty of installation - Easier then easy, just added a little engine oil to the O-ring and it slips straight on. Cost performance and comparison with other products - Expensive for sure a little O-ring, I am sure Webike would have an alternative from another brand but I am yet to reasearch this. About shipping and packaging - Cheap shipping cost, on time delivery and safety packaged. Any concerns, cautions, or advice when purchasing - If you decide to search for a cheaper alternative you are looking for a 12mm O-ring. View detail
Repair O-Ring for Oil Filter Cover
About quality and texture - Excellent quality, no issue with the O-ring. About the feeling of use - Zero oil leaks from the oil filter cover, so it is doing its job. Products to buy together - Add one of these repair O-rings to the cart when ordering a few oil filters. Difficulty of installation - Easier then easy, just added a little engine oil to the O-ring and it pops straight on. Cost performance and comparison with other products - Reasonably prices from SP Takegawa, I am sure Webike would have an alternative from another brand but I am yet to reasearch this. About shipping and packaging - Combined shipping cost was great and shipping time was spot on. All items arrived safety due to the great packaging, even when the box was slightly damged during its journey. Any concerns, cautions, or advice when purchasing - If you decide to search for a cheaper alternative you are looking for a 40mm O-ring. View detail
Pin is short and unusable.
The pin is short and the holder is at an angle, making it difficult to apply force and work.
When incorporating Mr. Takekawa's parts, the Manufacturer listed them as tools, but…
View detail
Pulley Holder
About quality and texture - Excellent quality, the holder has a solid feel and looks like it will last my lifetime. About the feeling of use - Works really well, did a great job stopping the motorcycle part from rotating and has plently of protection from the red rubber covering. Products to buy together - If you are looking to purchase a pulley holder for your Monkey 125 you are more then likely going to be also buying a flywheel pulley too, I went with the one from Kitaco product # 674-0500130. Difficulty of installation - Easy to use with the T bar handle, it gets the tool nice and tight on the motorcycle part. Cost performance and comparison with other products - Priced well when on special, there are multiple brands that sell this tool on Webike but nothing cheaper then the one from Takegawa. About shipping and packaging - Was part of a larger order delivered by sea freight. Was cheap, arrived on time and everything was packaged safely. Any concerns, cautions, or advice when purchasing - The pulley holder is adjustable from a diameter of 60 to 120 so just make sure it suits the part you are intending to use it on. View detail
15.5 diameter hose clamp
These 15.5 millimeter in diameter hose clamps are used with the 12 millimeter hose, both being from Special Parts Takegawa. Webike have these priced very well considering they are a four piece packet. When installing I like to add electrical tape to my plyers to prevent the hose clamp coating from being damaged keeping them looking as new on the motorcycle. They are a nicely designed hose clamp and give a clean look and finish as compared to the traditional style of hose clamp you tighten with a screwdriver. Looking forward to adding more great parts like this from Webike to my Honda Monkey 125. View detail
Used with 5mm internal hose
These 9.5 diameter hose clamps from Special Parts Takegawa are used with their 5 millimeter internal diameter hose to create an excellent fit and seal in my breather hose setup. The hose clamps are made from steel with some sort of coating to stop them from corroding, would be nice if you could be made available in stainless steel for a better looking finish. In stock and available from Webike at a great price. A tip to help from scratching up the coating on these hose clamps in to add some tape to the plyers you are going to use to compress the tabs, works a treat and keeps them looking new. View detail
11.6 diameter hose clamp
I am using the internal diameter 8 millimeter clear breather hose from Special Parts Takegawa in this photo and the usual 13.1 diameter hose clamp was not suitable to use with the breather air filter I had one hand as its mounting pipe diameter was small which was leaving the breather air filter loosely mounted on the breather hose. These 11.6 diameter hose clamps resolved my issue by applying additional force on the breather hose and securing the breather air filter to a state that I was more then happy with. Same price per packet as the other sized hose clamps from Special Part Takegawa but for some reason you only get two per packet instead of four. View detail
Adjustable sized pulley holder
Almost all the maintenance tools I have to work on my motorcycles are from Kitaco but I went with the one from Special Parts Takegawa for the pulley holder purely because it was cheaper, that might have been a mistake as the red rubber covering has cracked and is damaged already. The pulley holder works well but has now lost some protection from possibly damaging the motorcycle parts. When in use the pulley holder works well and suits many different sized parts, I have used it to remove my oil spinner and flywheel. The clutch will be have some maintenance next so I will be trying out on that too. So in summary a good priced pulley holder but the quality of the rubber covering could be better and would be nice if a replacement covering was available to purchase. View detail
Easy Custom
It's cheap and easy Custom. It looks very stylish too. View detail
Extra hose clamps required for my install
I purchased a Special Parts Takegawa catch tank kit that was not designed for my motorcycle and required additional 13 milimeter hose clamps to complete the installation. It is great that the included document contain all the part numbers of the kit so in cases like this you can easily look up where to purchase the part numbers to get the job done. Great quality spare parts at an affordable price. Only down side is at the moment there is no really cheap shipping option to Australia so I need to wait until I have a suitable sized order to make my purchases. View detail
It's just one of those things.
It's not impossible to use, but it was easy to come off because the hook was too weak.
I think it would have been easier to use if there were no bumps in the patches.
View detail
I'm not on much.
I use it to remove the Flywheel on my LEAD 100.
There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.
I chose the
The pin diameter of this product is 5mm and 9mm, and 5mm is just right for fixing the Flywheel of LEAD.
Also, the 9mm one is used to fix the drive train.
I really appreciate the universality of it.
I don't have a lot of time to use it in my daily maintenance, but the Gold price is reasonable, too.
It is very useful to have.
I mean, I can't do LEAD maintenance without it ….
View detail
Necessary for Chain's Piece stuffing.
This tool is required to pack a piece of Non-Seal Chain.
When you change the number of chain pieces in Sprocket, you will need to change the number of chain pieces as well.
View detail