Reviews
Since it was dark even if Wright of NSR250R changed into the efficient bulb too much darkly, HID is purchased. Since the bulb went out, the fuse melted and the high tension of the ballast had broken to the blinker relay although HID of 88 was before a
Since it was dark even if Wright of NSR250R changed into the efficient bulb too much darkly, HID is purchased.
Since the bulb went out, the fuse melted and the high tension of the ballast had broken to the blinker relay although HID of 88 was before attached to XR, the moto garage was used this time.
Since attachment on a size was doubtful when it was an attachment change type and a low and NSR were H4R, purchased the H4R adapters, but.
The person [ who buys it ] for whom a low and interchangeability do not have an H4R adapters, who was not able to do a replacement, who cut off the portion of the clip after all, remade the clip newly by plastic repair, and required great time and effort had better be careful (processing required).
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Neither blink nor lighting is carried out. It was the same although it did by other motorcycle. If it returns to the relay of normal, it will operate correctly. They are inferior goods!
Neither blink nor lighting is carried out.
It was the same although it did by other motorcycle.
If it returns to the relay of normal, it will operate correctly.
They are inferior goods!
View detail
Fits: その他 12V car
sr400 1.5w To led Sequential Blinker
12v1.5w on body sr400 To led Sequential Blinker
High flasher did not improve and became very hot within a minute, so I stopped using it.
View detail
Stylish but
Broke after a little over a year (1 bulb out of ball), just out of warranty! It works, but is it inspected? View detail
Blinker relay for what?
I have LED Blinker but it did not function properly.
There should be no problem with the installation, but only the back of the Right Side is permanently lit, even though the Blinker is not activated.
Gold wasted.
View detail
even with all this
I bought them together for my GALE SPEED Radial pump master, but after the order was placed, only the master was cancelled due to an undetermined delivery date, even though it was available for purchase on the product screen.
What should we do if they sell so much without MASTERBody?
View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
I want to cancel an order, but I don't know how.
I want to cancel an order, but I don't know how.
I don't know where to inquire, so I am writing here, even though it is out of place.
I want to Cancel the order before it is shipped, but I am having trouble doing so.
View detail
![[Optional Parts] PG-660 Pulse Generator Rotation Signal Converter](https://img.webike-cdn.net/catalogue/images/41170/11295_01_TS.jpg)
Fits: YAMAHA SEROW, KAWASAKI KLX, KAWASAKI D Tracker, YAMAHA SR
Not available
I used it for the UniversalTachometer, but it was completely useless and the Tachometer is still unresponsive. View detail
Small
Smallish
not pass the inspection
Cannot be returned or exchanged.
View detail
Coupler reassembly
I bought this for reassembling Caphler, but it is too useless!
Anyway, it bends.
Bends even when neatly inserted.
In the end, the tools I made myself were the most useful.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
It cannot be used for Monkeys released in Korea.
Monkeys released in Korea cannot be used like the description picture.
I bought it thinking it was Jack by Jack and was disappointed.
Could it be that you use it somehow? But if that was the case, I wouldn't have bought it now.
Note please. It cannot be used on Korean monkeys.
It is available only for Japanese domestic type. ------------------------------------------------------------ -------- Korean release Monkey cannot be used as described photos.
I thought it was a jack by jack and bought it. But if so, I wouldn't buy this product.
Please note. I can't use Korean Monkey.
It can only be used for Japanese domestic. Powered by Google Translator
View detail
poor quality
I buy this product for my bike Zx-25R, but the quality is very unsatisfactory, not working, if you want but this product, i suggest you think frist that buy View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
Doesn't fit a 22 year old super curve
First of all, I paid for the delivery in 2-3 days, but it arrived in 13 days. The delivery is slow and the blinker in question says that all the super curves of the previous year can be installed in the manual.
I have to process it to install it on a 22-year-old Super Cub.
The lens inside doesn't fit either --------------------------------------------- ------------- Once the shipping was paid for two or three days, the arrival arrived in 13 days. To do it, I have to process it.
The lens inside is not right. Powered by Google Translator
View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
It doesn't work
It is xv250, but you will need a further extension cord to use this.
VIRAGO250 requires a length of about 95mm, which, if you look closely, is listed as 700mm 。 More than 200mm short. 。 I am sure the Shop is not at fault because I made a mistake in checking the length, but if you believe it and cut the seal, returns will not be accepted, so I suggest that you always check the length before ordering.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50
I can't get the acc out!
Used with Cub Pro JA42. After installation, the acc power supply could not be removed. After checking, it turned out that the white wire of the acc. was not making contact, the white wire was crimped inside the connector and the copper wire was not making contact. I fixed it myself and am now using it. I bought this product to take the acc out with ease, but spent a lot of time trying to figure out the cause of the defect. It was disappointing. If it wasn't defective it would be a good product. View detail
Improvement desired
I bought the same Switch Wiring I had been using because it had come off the base.
Easy to install, yet does not fit well...
Looking closely, one of the two screw holes was gapped by 3mm.
I had no choice but to widen the hole with a File and finally install it.
However, this time, the wiring came off from the soldered part, and I had to re-solder it.
I had to use it for half a day just to replace the Brake switch.
The Master Cylinder is good enough, but I think the Switch that comes with it is very poor.
Since I went through the trouble of buying it, I installed it, but I'm not sure how long it will last.
View detail
Parts missing
I went to the local post office yesterday to pick it up after work, brought it home and opened it.
The fins on the Fog Lamp were missing.
View detail
Fits: KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI GPZ1100, KAWASAKI GPZ750turbo, KAWASAKI Z1000P (Police), KAWASAKI Z1000 CSR, KAWASAKI GPz1100, KAWASAKI Z1100 (KZ), KAWASAKI Z2 SPECTOR, KAWASAKI Z1000LTD/Z1Classic, KAWASAKI Z1000LTD/Z1Classic, KAWASAKI Z1100 (KZ), KAWASAKI Z1100GP, KAWASAKI Z1100R
Manufacturer's quality control during shipment
The original pitch is too short, and beginners may crush the base of the body.
Is the pitch of this product too short to screw in and crush at an angle, or cannot be installed?
The battery case and this product cannot be cut down, and it is difficult for beginners.
Another defect in the purchased lot?
Questionable quality control as a sales product.
View detail
It seems to be incompatible with Blinker made by KIJIMA
I used them on my NMAX125 and liked them so much that I decided to use them on my NMAX125. I installed it on my SV650X when replacing the blinker.
Installation is not difficult if you have Electric Works Pliers and can crimp Bullet Type Terminals.
However, with the KIJIMA blinker installed this time, there is no problem with the blinker function, but it did not turn on the Position light.
It seems to be compatible with the Blinker used.
View detail
It stopped working right away.
Because we did not check DC or AC.
The ball went out in a flash.
Of course, it is not covered by warranty….
View detail