Reviews
I trusted you because you are DAYTONA...
One SideLED went out (3 out of 9 bulbs) in a little over a year. I trusted DAYTONA because they are EMark certified, but the LED sequential LEDs are not durable enough. View detail
Fits: SUZUKI Hayabusa
During degreasing
I wiped it with the included cloth to degrease it and it had minor scratches.
I shouldn't have put it on.
If you touch the top surface of the adhesive village, fingerprints will appear.
View detail
I put it on cb400ss.
Is it a problem with Engine Displacement Volume? The actual speed and Meter are messed up. This will not pass inspection. I can't use it. View detail
Everything doesn't fit.
Used in Touring and Circuit
First of all, the RPM is too Gap.
Rev limit is applied at 10500 rpm in NORMAL.
It could be displayed at 8000 rpm or 9500 rpm.
And speedometer
Repeated acceleration and deceleration leads to incompetence.
HomeStraight is displayed at 30 km/h even though it is over 100 km/h.
A light flush will display well.
Displays solidly but Pulse response is too slow.
View detail
The product was initially defective. Please inspect the product carefully.
It is very disappointing because it looked cool.
I thought it might be a bad contact, so I reattached it several times, but to no avail.
I think it may be a problem with the infrastructure.
I will return it because I don't expect it to be durable.
View detail
Fits: HONDA ZOOMER-X [Zoomer-X]., HONDA ZOOMER-X [Zoomer-X].
BlinkerLED conversion
I installed it on my ZOOMERX. I thought it would be a simple mounting, but it is true that no modification is necessary, but at the expense of not being able to turn on the lights of the meters (Indicator, back light, etc. all).
It looks like Wiring needs to be modified if it originally had one Indicator (direction indicator). With a little research, it could be done inexpensively. It was a good learning experience.
View detail
It's not a product evaluation, it's a construction issue.
I received it today. The only complaint I have about the product is that I can't open the lid. I've been nudging the screw a bit, but it doesn't seem to be loosening. I know you didn't even check it by squeezing it with the power tool like an idiot, but what are you really going to do about it? View detail
Fits: KAWASAKI ZRX1100, KAWASAKI Zr-7S, KAWASAKI Zr-7., KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI FX400R, KAWASAKI GPZ1100 ABS, KAWASAKI GPZ400R, KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI ZRX1200S For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX, KAWASAKI ZRX1200S For Malaysia Market
The image is confusing.
I thought it was BlinkerAss’y, but it was Shock with LensSingle Body. View detail
Fits: KAWASAKI Z900, KAWASAKI Z400, KAWASAKI Z650
Does not fit. Do not buy!
I bought this to replace the Blinker on my z650, but…
When I brought it to the Motorcycle shop, it took 5 seconds. We can't handle it because it would be an illegal modification." I was pushed back.
I explained the situation to Webike and the return process was Smooth, which helped, but … it's hard to buy Parts other than OEM Product.
View detail
Concerns about rainy weather
I was concerned at the time of purchase that rainwater might not get into the USBConnector, but as I thought, the cover was too loose and it was right on target. Worst! View detail
inoperative
Power Supply Cable and Pulse wire do not work even though they are connected properly.
（I told him that I wanted to know where the Pulse wire was taken out (only the LED light was on), and I told him again, but he has not responded again.
Be careful not to buy cheap!
View detail
Whether that's an error or an early defect...
I should be running at a constant speed, but when I look at the meter, it comes and goes at +/- 5km.
Too bad it took so long to remove and install the Covers.
ABS errors are gone.
View detail
The cheap buy.
I bought two and both ran out after about a month.
The tail light is 6W and the wire is thinner than the domestic 5W one, so I wondered if it was Large sturdy. I thought so, but it was not Large sturdy.
I still prefer to use lights made by a proper manufacturer.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA CYGNUS Gryphus, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA NIKEN, YAMAHA XSR700, YAMAHA XSR900, YAMAHA NIKEN GT, YAMAHA MT-10, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA YZF-R125, YAMAHA XMAX, YAMAHA YZF-R15
Not available
There is no wire to connect. Maybe it's the wrong car model ...
I was going to install a Grip heater but bought one to no avail.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Disappointed with low life expectancy
ADDRESSV125 CF46A has been converted to LED Bulb for low power consumption.
He passed away after about three months.
Inferior to Chinese products in spite of high price
View detail
Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY
Mounting Bracket must be included.
I know you wrote that, but looking at the image, I mistakenly thought that the base was also included. View detail
Is it too hard to put it on?
Two-piece set. For trying again if you fail. (Lol)
I am supposed to be good at this kind of pasting due to my profession, but I managed to succeed with the second one. (-_-;)
The first peeled off paper is not easy to peel off. It was PET, which seems to be a hard type, but the film of the body was not firm and was fluffy, so I had a hard time peeling off the second peeling paper and the first peeling paper. Then, I practiced peeling off the first sheet of the Body. (Lol) I was able to peel it off by hooking it onto the Cutter blade. However, without a tool, I managed to peel it off by hooking it to the Cutter's blade, as it is no good if you have to crunch it with your fingernail.
Then, the second body and the meter were sprayed with plenty of diluted soapy water and attached. Since the soapy water moves Switzerland, positioning is not necessary. In fact, the first piece of peeling paper cannot be peeled off, so positioning is meaningless.
And you managed to paste it in frustration?
I was still frustrated with peeling it off, and it looks like Dust was in it a bit. Well, it's not very noticeable, so I'll take it as a good thing for now.
But I don't like it, so I may remove it soon.
I wonder if there is something like Film that is very easy to paste on a phone or something.
View detail
Power consumption is only low.
It is clearly darker than Halogen.
We contacted Manufacturer.
This product is darker than Halogen bulbs, but not brighter.
The Company does not guarantee the accuracy or completeness of the information provided.
The response was.
It cannot be used for Headlight.
View detail
There wasn't enough light.
I replaced the HI with the 01 BANDIT 1200 HI, but the Halogen is brighter and disappointing… It's a Projector Headlight, so it doesn't seem to be an optical axis adjustment issue. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI Z1000 (water-cooled), HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09, YAMAHA MT-07, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Z750 (water-cooled), HONDA RC51 All, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA FZ6R, YAMAHA MT-09, YAMAHA MT-07
CBR1000RR '13 did not fit the reverse car
CBR1000RR '13 It didn 't fit the reverse car. shouldn 't the webike side write down the proper indications?
I think many of the Cases were not adapted for other Impressions.
View detail