Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Cost performance is good enough
For the price, I think this is good enough quality.
I didn't notice any of the rattles that others have noted for me.
Since I prefer a distant position, Dial is set to 5, or is it because of Switch interference? I don't think so.
The Clutch is also light, so the Short lever is long enough.
However, it was a little difficult to install.
The Switch is in the way and the Socket won't fit, so I have to remove the Wire, loosen the Clamp bolt and set the Holder to Up to Access the Lever fixed Bolt Nut.
I tried to remove the Switch, but it was too hard and the Screw was going to get stupid, so this method is no good.
I ended up turning it many times with Spanner to remove the Nut.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA XSR900, YAMAHA TRACER900GT, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA TMAX530, YAMAHA NIKEN, YAMAHA MT-09, KAWASAKI Z900RS, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-25R, HONDA REBEL500, HONDA REBEL250, HONDA PCX150, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SF
tw225
It doesn't come on tw225.
It has a projection. It doesn't fit to the end even if you turn it.
The circle is the Large threshold.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Easy-to-grip shape and high quality
The shape of the Lever's gripping surface has a moderate radius and fits comfortably in the fingers, making it very easy to grip.
I like that the price is not too high.
View detail
Fits: HONDA CBR600RR, KAWASAKI Ninja250SL, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI Z125 PRO, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI KSR110, KAWASAKI 250TR, YAMAHA XT250X, YAMAHA WR250X, YAMAHA WR250R, HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250BAJA, HONDA XR250, HONDA XR230
It works!
It is used with GymkhanaSpec.Z250SL.
Using the Hexagonal Wrench and the included Screw
It just fits over the OEM master cylinder cap.
Ready to install.
During my first fall at Gymkhana.
Thanks to this, Master Cylinder is safely protected and
I was able to resume my run.
The price is not too high.
I killed the Master Cylinder.
Based on the fact that you won't be able to stop.
I think it's a great cozy!
View detail
sniperRear Sets
It is a good point that there are many positions to choose from, I can adjust the position to suit me, so I can run comfortably, I am satisfied. The ankle grips are not as strong as the OEM ankle plates. View detail
Fits: YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA XSR900, YAMAHA TRACER900GT, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA TMAX530, YAMAHA NIKEN, YAMAHA MT-09, KAWASAKI Z900RS, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-25R, HONDA PCX150, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA 400X
Nice Design.
I like the aluminum texture and the hole for wiring compared to the Normal cap. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It makes me feel a little race ish.
Rear stand10,000 yen to 15,000 yen
Included Parts:About 5,000 yen
Racing Stand Hook12,000 yen?
But it's convenient.
Put a tree or something on the Side Stand to make it more centered, and then put the Rear Stand on it.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4R
Dress-up, in case you...
I bought it in case something happened to me and hoping for a dress-up effect.
As for the mounting method, the fixing screws Quantity:It was simple only to change 2pc, but the OEM screw was removed by +Driver, and the screw that SNIPER attached together was a hexagonal type.
As for the contents of the product, there were only the product and two Stickers, and there was no particular instruction manual.
I am satisfied with the accuracy and other features without any problems.
View detail
Fits: HONDA CBR250RR
Touch is good and it is not different from OEMLever!
[How is it used?
I have large hands, so I use the largest of the six levels, but I think women with small hands can adjust the Merit.
I also think that Lever can be knocked down, which will reduce Damage when you fall.
Was the one you received as per Image?
It was the same as the picture posted on webike.
Was the installation difficult?
It was easy to install because it was only one screw that fixed Lever.
However, please note that the screw of Lever is co-tightened at Reverse side, so if you drop the screw and it goes into the Cowl, it will be difficult to recover.
How was your experience with it?
Touch is good.
There is no unintentional change in the position of Lever when it is used, and it does not knock down, and there is no sense of discomfort with NORMALLever.
[Included Parts:were they on?
It came with a Sniper Sticker! (^_^;)
[Was there anything that disappointed you?
It met our expectations and we were not disappointed.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPER Master cylinder guard installation
It's the perfect quick and easy dress-up.
If you match the color with other parts, it is even better.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
For Dress-up and MASTER protection
The image in the product introduction looks like it hits the cowl, but it can be installed without hitting the cowl even if the Handlebar is cut on the Left Side.
There may be individual differences…
I bought Gold, but it's like Orange Gold, so the color doesn't match with other Gold products, but I told myself that it's SNIPERGold, so I'm satisfied!
When I install it, I am very satisfied with the Parenthesis well finished…
It came with 2 Stickers!
View detail
Discreet Engine slider
[How is it used?
It was installed today, January 3, 2021.
I won't know until it falls over, so I'm not sure what the usage is….
Was the one you received as per Image?
It was just like the picture posted on webike.
Was the installation difficult?
About 30 minutes.
Quantity before and after the Instruction Manual:Pair (for Left and Right) It was hard to tell because it didn't clearly state the
It is impossible to tell without checking the actual car and the actual product together at the time of installation.
How was your experience with it?
It's hard to tell without falling over, so it's hard to say….
[Included Parts:were they on?
Locktite to fix the Screw needs to be purchased separately.
[Was there anything that disappointed you?
I thought it would be longer.
I would like it to be longer.
Point and hang of the installation are the same as in your own diary. "The first tinkering with motorcycle in 2021 (^_^;) Part 1 、 "The first tinkering with motorcycle in 2021 (^_^;) Part 2 for more information.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
For Dress-up
I put it on my Dress-up!
Good for falls and preventing Lever from breaking!
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
I can always see it.
It is a product to remove the existing Screw from the Driver, put it on the top of Master Cylinder and tighten it with attached hexagon Screw×2.
Works with Phillips Screwdriver and Hexagonal Wrench only.
Rough-hewn aluminum looks and quality are both good!
The red color is a little darker and more purplish? A little dark? I wonder what that means? It's not a fluorescent color system.
When the handlebar is cut to Left, it hits the connection between the Front cowl and the Wind Screen.
I think you will need to take just a few measures. I put a transparent protection Seat on the Cowl side.
If you don't mind, it's not a problem for those of us who don't care, because the contact is almost invisible from the outside.
If you're a nervous person like yourself, you'll need to be careful.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Glove size is S or M for those who are nervous.
Small hands, beware! I don't know about other motorcycles, but there is a sensor on the Clutch Side, and size can be adjusted in several steps on the Lever side, but if you don't set it to 4 or more, you won't be able to fully enjoy 1st gear idling. If you don't set it above 4, you won't be able to fully enjoy Idling in 1st gear. As you may know, ZX25R's RPM goes up when you hold the Clutch in 1st gear from N. If you set it to 1st gear, the RPM goes up to prevent stalling and smooth start.
However, when this product is adjusted for Lever's distance, the contact position of Sensor remains the same, and the rotation rate remains up when the adjustment position is below 3.
If you have small hands, want to avoid wasting Engine speed at traffic lights, etc., and want to use up all the functions of the 25R, I recommend you to keep the Clutch Side OEM or go with another product.
SNIPER's Brake Side is in good shape and looks good, I'm using OEM for Left and SNIPER for Right (Quantity:Pair (for Left and Right) It's uneven and worrisome, but until we get the ideal Foldable, …)
View detail
Fits: SUZUKI GSX-S125 ABS, SUZUKI GSX-R125 ABS
method of cutting
At first, I couldn't install it using only the instruction manual that came with it, so I contacted webike and asked if I could return it. The quality, texture and design are good for the price. The quality, texture, and design are good for the price, but it would be even better if the Instruction Manual was included. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Cool!:Polishing's Aluminum parts are the best.
Material:It is composed of aluminum parts of Polishing and is cool. 800g weight reduction by Fender Eliminator because OEM Fender is thoughtful.
Garbage comes in from there because a hole in the back of this model is left open for wiring. I made a part with resin and sealed it.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It's so well made that I'd give it a rating of 4 stars.
SNIPER's Fender Eliminator has a very nice texture and allows you to change the angle of the License Plate and the width of the Blinker's overhang. There is no waterproofing of the mouth, so you need to waterproof your mouth by yourself. You can see how to install it and how to make it waterproof in this video on You Tube. (Thrillman) Than View detail
Fits: HONDA PCX150, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA 400X, YAMAHA MAJESTYS, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA XSR900, YAMAHA TRACER900GT, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA TMAX530, YAMAHA NIKEN, YAMAHA MT-09, KAWASAKI Z900RS, KAWASAKI NINJA1000
Perfect for dress-up!
Just replace the O-ring attached to the OEM.
The hole for wiring is also open, so if it is wired, will it give a little race ish feeling?
I wanted to unify them with the Green Light made by SNIPER, so the colors are the same.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
ZX-25RSNIPERFender less kid
Texture
The cleanliness of this cut-out is very nice.
It's beautiful.
It can be installed nicely without any modification.
I would especially recommend it.
The number angle can be adjusted widely.
The width of the Blinker is wide enough to adjust.
Of course, Reflector and License Plate Light are kid-ized from the beginning, not Option.
(I've seen other companies' products with this option, so I've made a point of mentioning it.
Mounting
If you have installed a Fender less in the past, you should have no problem.
If you're new to the installation, I think it's better to leave it to the shop to put the Wiring together nicely.
Notes on this product
It has more Bolt points than other companies' Fender less. The reason for this is because we are able to make the adjustments that I wrote in the recommendation.
For that reason, I think it's best to periodically tighten the Bolts.
so-called "Backwards peta. You can't adjust to the angle of the It's illegal to begin with, the back petal is illegal.
The Number angle can be adjusted to quite an excruciating angle, but don't use it in a bad way.
View detail