Reviews
Not slippery at all.
I would recommend this one, although the tank is slippery so I couldn't get a knee grip at all and was feeling a little stressed,
As soon as I put this product on, it stopped as if it was stuck and I was able to get a good knee grip! I was able to grip my knees with this product.
It is recommended because it stabilizes the driving.
View detail
Nice product
Hi every one,this is a very good product, it prevents me from sliding forward and it does its job on the track, a worthwhile purchase. View detail
Quite effective! No slipping.
[How is it used?
Purchased for late cbr600rr pc40. had a cheap Universal Type pad but it wasn't good enough.
Was the one you received as per Image?
It is as shown in the Image. It looks like it will Grip well just by its appearance.
Was the installation difficult?
It was easy. Just wipe it down with the included Seat and stick it there.
However, there is no such thing as a Handling Instruction Manual, and the direction to paste it probably turned out to be wrong. I will reapply it next time.
How was your experience with it?
Very good! Grips well and the knee grip makes it less tiring. I bought the EVOType in black because my car is black. I thought the bumps would be noticeable, but they were not. The rubber grips well, so it sometimes got stuck when I was going back to the car in a Large position.
[Included Parts:were they on?
It included a Seat to wipe the area to be applied and some kind of paper written in various languages. Translation (it was not written in Please type here.
[Was there anything that disappointed you?
I would have known what direction to stick it if there had been an image diagram of it after sticking it on the attached paper, but there wasn't, so I didn't know better and stuck it on the exact opposite side. I am able to use it normally, so there is no particular problem.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy to cut and use as desired
It is easy to use because it can be easily cut and pasted into any desired shape. View detail
I use it for GSX R1000
It's less painful than stomping because it's not ThornThorn, and it's more Quantitative.:1 Set of 2pcs. so it is very helpful! View detail
Fits: SUZUKI GSXR1000
Knee grips are perfect.
I used it on my GSX-R1000 K1 and it has a perfect knee grip. The foot does not slip off the tank during short braking, and it makes a series of movements much easier. However, I think the price is still expensive. View detail
Fits: YAMAHA MT-09
Quality as expected
Chose EVO because I like the texture. black is a nice gloss. Of course Grip is stable. View detail
favorite
Quantity:1 Set of 2pcs. You can use it in your favorite shape and large size according to your body shape and position.
I think the adhesive strength is sufficient because it does not shift even if it is used with a small cut.
There is no inferiority in comparison with the products of a certain famous manufacturer.
View detail
Fairly strong adhesion
Normally you would put it on the SIDE of the Tank.
I put it on the Center of the Jacket because the Fastener part of the Jacket hits unexpectedly.
Even so, the capacity is so large that it could be added to the SIDE.
View detail
On the SIDE of the CBR650R
[Purchased Kit Lack
If you're a CBR650R rider, you'll know that there are a lot of Tank Pads out there for the 650R, but when you do a knee grip, your inner thighs hit the Cowl underneath the Tank, not the Tank, so the commercial Tank Pads are not practical. I bought this to put on the part of my thigh that hits the knee when I actually grip it.
I really wish they'd release a dedicated one, but for some reason they haven't …
Impressions of use
I made a paper pattern of the area I wanted, then drew a rough sketch along the pattern, then scissors and cutters along the sketch.
It's a great product for when you don't have a dedicated pad, or when you need a little something here and there for your Plus.
I've run with them a few times now and they've made my knee grip much easier.
I've only had it for about two months, but I haven't seen any of the damage or breakage common to cheap products, like tape coming off or rubber tearing!
【Review】
There is a little bit of work involved in processing it yourself, but I thought it was the number one practicality because you can process the original shape and the necessary parts to suit your needs.
The price is a little cheaper than buying a commercial Pad, so I think the cost is the strongest!
If you're riding a CBR650R and want a Pad, I'd recommend it like crazy! It's really useful lol!
View detail
Fits: SUZUKI GSXR1000
EasyGripSupport EVO
It is good without complaint, but I think that it is expensive in terms of Gold. I installed it on my GSX-R1000 K1 and it took me a long time to position it. View detail
Fits: YAMAHA MT-09
Reduce body fatigue and maintain posture
I was holding on to the Handlebar because the Tank was slipping when accelerating, but since I put this on, my upper body feels much better.
As for the knee grip, you only need to put a little pressure on it and it's large and strong. Therefore, the lower body is also easy.
No acceleration, no deceleration. (Even in urgent situations) I also think that my posture is more stable when cornering. I'm glad I put it on.
I like it because it looks good because it is a special product for each car model.
View detail
Fits: DUCATI 848SF, DUCATI 848EVO, DUCATI 1198, DUCATI 1098
It's cheap and it works great!
Because the one of a certain famous manufacturer was too expensive, I bought it because I found it when I was looking for a similar product. I didn't know much about it, but it seems to have been used in TTRace and EWC on the Isle of Man, and it has a track record.
The cut is clean and the Size is fine.
It's the middle of summer now, but the double-sided tape that I was worried about is still in place because I degreased it properly. (I don't know about other cars, but the 848 makes the Tank hokey in the winter without a hitch.) It's still neat because the cheaper similar products I used before peeled right off.
It is different from Instruction Manual, but I put it on the lower side of Tank. In fact, the effect is improved because it hits more on the lower side.
It has plenty of grip and is not warty so it won't hurt. It is very useful for street riding, hard braking and hang off.
Oh, as I said in the description. "When you open the package, you can smell the unique sweet smell of the ingredients. was true. It smells so good.
Please experience it.
View detail
Personally, I recommend it!
When I changed my motorcycle, I installed it not only for the knee grip but also for the scratch prevention.
I used the same product on my previous GSX1300R Hayabusa and had already experienced the look and feel of the grips, so I bought it before I took delivery and put it on the same day I took delivery.
I used to be one of those people who wore nothing at all, but once you experience it, it's actually quite uncomfortable without it (laughs).
I've never used another manufacturer's product, so I can't compare, but I'm very happy with it.
I don't know how durable it is because I replaced it on my GSX1300R Hayabusa without riding it much, but I think I will buy this product again even if it goes bad.
View detail
I think it's good
Definitely cheaper than the famous Manufacturer.
I've never used the famous Manufacturer's products, so I can't make a comparison other than the price, but you can choose from three different types and two colors.
It doesn't come off, and I'm satisfied with Large for now, and
View detail
Fits: YAMAHA MT-09
Just the right amount of grip!
until now [Color] Although I was using Clear, I introduced Carbon Tank Cover. Because it was One-off of quite large-heartedness, Pad around the knee was newly developed in Black.
I recommend just the right amount of Grip power.
View detail
I'd recommend it over stomps!
I used it on my MT-09SP. I have also used the Stomp Grip, but the grip power is slightly higher than the Stomp, but the EasyGrip is sufficient for use with STREET.
The warts are also rounded so they don't hurt through your jeans.
Stomps are not good for STREET because they hurt my knees and my clothes hurt and tear.
So I recommend the EasyGrip here.
View detail
Fits: KAWASAKI ZX6R
I used it on Grom!
It is installed on the Grom of Honda, which is active in commuting and touring in Large. The one that I was wearing before was damaged, so I replaced it with this product! View detail
The place where you can make your own shape is good!
It's a Large model, so it's a Large model to find a Small model.
So this product, which allows you to create your own shape, is a great choice for those people.
You can use it to increase the area of the car, even if it is exclusive to a car model, or you can use it to increase the size of the car, depending on Ideas. Nice items that you can use.
View detail
It's just the right grip feeling.
I bought it to make it for the Tank Cover of MT-09SP by myself.
Material and shape, Evo, PRO and Silicon, all of which I've touched, and all of which I've used before But Evo has the most grip, so it's Recommendation. So, Silicon is....
As this is for home-made, you just need to make a mold with a piece of paper, cut it out and stick it to the mold.
In the picture, the part of Carbon is the part that I made by myself.
This is a brand that is also available for each car model and can be recommended.
View detail