Reviews
Safe and secure driving at night
[How is it used?
→ City Riding ~Touring (More running at night).
Was the one you received as per Image?
→Image or more (in contrast to HalogenH4)
How was your experience with it?
I had low expectations for the LEDs because they are inexpensive, but I removed Halogen and popped them in and they are a blast!
[Points to note]
I→pon it, but I think Blinker's response has been a little weird since then! (This is a BIG-1 made in 1999)
How did it compare to other products?
I changed from→Halogen, and of course it is brighter, which makes nighttime driving more enjoyable.
Safety is also improved as it is considered to be more visible from the car.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I finally see the road!
I'm useing for Honda Giorcub, but the headlight bulb was too long, and I cut the end. Not heating, not flashing. It1s very good for my bike. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
After cutting, I put it in.
I removed 3−4mm from the last conical section to avoid putting it in Original's Light. Glass is still touching, I think 5mm is better.
Socket fits, brighter than OEM, light flickers while idling.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Good cost performance for an introduction to LED Light
Installed on SUPER CUBJA10 model, selected because it is easier to install than OEM ProductHalogen bulb. The low beam is quite bright. The high beam is not so different from the low beam because the low beam is quite bright. Overall, the price is not much higher than Halogen, and it is easy for beginners to install, so I recommend it for beginners. Incidentally, when installing, the bolt just below the light should be loosened by turning it as if peeking from below. I turned it the other way and had to replace the entire light housing. (???????) View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easily.
Easily replaced with a pon.
The color is now White, but the light intensity is not good.
View detail
It's not just the processing of some of the...
To be honest, it was difficult to install; OEM Valve Cover (1 Set of 2pcs.) The "H" was not able to fit in the bag, so I removed it and used it. The description said that it is waterproof, so I just use it as long as I am careful with water from the front cowl rather than water from the rain.
So far it is working fine.
I think the difficulty in adjusting the optical axis and the fact that the lens is not as bright as the Package can be discounted in terms of price.
I also have a spare Halogen, so at worst I can put it back together....
If you are looking for perfection, please make sure to ask a PRO person for help, and if you are thinking of installing it yourself, you should be prepared for a certain amount of forgiveness. The product cosmetically is good.
View detail
Installed on SEROW250
Replaced from SEROW OEMValve.
It is 4500k, but the color has changed from Yellow to White and it is bright enough.
The work was completed in less than 30 minutes.
I wish it were cheaper.
View detail
Fits: SUZUKI LETS5G, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETSBasket, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, HONDA PCX150, HONDA PCX, HONDA LEAD110EX, HONDA LEAD110
Cospa is the best!
Musashi Hid Kit installed 10 years ago is incompatible with hi-POWER FIB and replaced with LED Bulb to prevent Noise.
I thought it looked cheaply made and Large sturdy, but it was pretty bright, so Big surprise!
So far it seems to work well with FIB.
[Manufacturer Description
The aluminum body is at an angle to the black resin base, but this is a deliberate adjustment for optimum focus.
[Corresponding Model Type]
Honda:PCX, LEAD 100/EX (2008-2013)
SEA BASS:ADDRESS V50/G (2006~) LETS4Basket LETS5/G
View detail
![LEDHeadlight Bulb Precuous Ray Z [Precious Ray Z] H4](https://img.webike-cdn.net/catalogue/images/76782/97430_TS.jpg)
Replaced by DAYTONALED
The OEM bulbs were out and I replaced them with Halogen bulbs and now with LED bulbs. The voltmeter was below 12V when idling and the battery went up once in traffic, but after replacing the LEDs, there is more than 14V when idling.
Even though it was bright, I thought it would not be a nuisance as the light seemed to be cut off at the top on the oncoming traffic side with Low beam.
The bulb replacement was the same as the OEM Product in terms of installation Size, just replace the bulbs.
It took about 4 hours to remove the cowl for the VERSYS250Tourer, as I was not used to doing this.
Tail lamps and license lights have already been replaced with LEDs, and now Headlight and CityLight have been replaced with LEDs.
View detail
Excellent powerful LED lamp for scooter
Halogen upward compatible
It's like Halogen is converted to LED, so it's very easy to replace the Halogen with LED, but it's not AssistHigh beam or DualHigh beam like the high-end models of other companies, so it gets dark in the front when it's High beam. If you are looking for brightness, I think other products would be better, but I think it's a good cosmetic choice for dress-up in Maine in the city. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
It is easy to install.
Flicker occurs during Idling as with Halogen, but Once it starts running, it stabilizes.
Since there is no control box, installation is easy. Moreover, the price is as low as High WattageHalogen.
The other thing is durability. I hope it will last a long time.
View detail
Mounted on a 2022 BOLT Shoulder Bag
I was able to install the 2022 BOLT Shoulder Bag with no problems, no interference, etc.
I don't drive at night very often, but even during the day, I can see the light shining on the car in front of me at stoplights.
I would like to think that the light intensity has been increased to some extent over the Normal valve.
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
Great LED low beam
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
Great LED low beam
The problem is durability.
I installed it on my GSX-S1000
Since we do not run most of the time at night, we were OK with the brightness as long as it was at least as good as the OEM Halogen.
My biggest concern was the light distribution, which of course cannot be exactly the same as Halogen, but it seems to be acceptable.
From what I've seen of Cutline, I wonder if it will manage to pass inspection. I was expecting that the brightness would be the same as Halogen. I expected the brightness to be the same as Halogen, and I was right.
More importantly, we expect reliability and durability.
The image was just replaced and the optical axis was not readjusted.
View detail
It got brighter.
Headlight case & Lens (H4 Valve) from Other Brand Product was installed without any modification, only replacement.
Although slightly inferior in Specifications (light output/power consumption) compared to Sphere Light, it is bright enough with low power consumption compared to the high-efficiency H4 Valve.
There is no mention of product life and there seems to be no warranty, but it has been working fine.
It doesn't say anything about Japanese Vehicle Inspection Correspondence, but if it doesn't pass, you can replace it with H4 Valve and pass the inspection.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, SUZUKI GSX1300R Hayabusa, KAWASAKI ZX-6R Ninja, KAWASAKI ZX-10R Ninja, HONDA CBR600RR, HONDA CBR1000RR, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R3
Precious H7LED
I think this product is of interest to my brothers and sisters whose headlights are H7 models.
There are few products, especially those that are sealed-compatible.
Considering Waterproof and heat dissipation, we arrived at this product.
Space behind the Light was more necessary than imagined, and the Control Unit was heavy and of a reasonable size.
The V-strom650 had plenty of room in terms of Space, and there is a solid Bracket behind the Cowl, so there is no problem.
It was fine until I wrapped the double-sided tape around the edge of the light case and attached the WaterproofBoots.
When attaching the Heat Dissipating Ribbon to the Valve unit to hold the Valve in place, the
Since the valve unit is compact, the part that comes out of the boot is short, and it is necessary to screw it in while crushing the boot, which gives the impression of a forced installation.
I am not sure how it will affect the headlight unit side, but since the Image is pulling the Valve all the way outward, there is a possibility that the optical axis adjustment mechanism, etc. will be stressed.
Also, a heat transfer grease is required between the Valve unit and the Ribbon, but is included.
Since it is outside of the Waterproof part, there is a concern that the car models that get wet directly with rainwater etc. will flow.
I also saw a NetReview that said the lifespan is 2 years, so that may be part of the reason.
Ribbon generates quite a bit of heat, so it is a proof of heat dissipationLeft, and stable heat dissipation can be expected.
However, depending on the car model, there is a possibility of deterioration or deformation of resin parts in contact with the ribbon, so it may be necessary to adjust the shape of the ribbon so that it does not come in contact with the ribbon.
The brightness is brighter than Halogen, but not dramatically so.
Cutline looks no different than OEMHalogen, but I think optical axis adjustment is necessary.
I was so swamped with optical axis adjustment that I couldn't quite figure it out.
I don't know how many times I have removed Cowl….
There are products that can be installed inside the waterproof cap, such as H7 and more compact products.
Compared to such products, the advantage is the good heat dissipation by Ribbon.
Long-distance travelers can expect stable brightness in terms of heat dissipation.
I think it is a good idea for a product, but there are various problems and I think there are only a few car models that can be installed without Stress.
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
Excellent bright LED lamp for scooter
Power consumption is only low.
It is clearly darker than Halogen.
We contacted Manufacturer.
This product is darker than Halogen bulbs, but not brighter.
The Company does not guarantee the accuracy or completeness of the information provided.
The response was.
It cannot be used for Headlight.
View detail