Reviews
Fits: HONDA CB1300SB, HONDA CB1300SF
CB1300SF 2021MODEL Wyvern classic
The Exhaust System is always Earls Gear.
Welding, burn color, Sound, Fitting, everything is excellent.
Cospa is also good considering that.
When the engine is started and the car starts to run, it is pleasant to see the car blow up at once with a vigorous sound.
If you have a car model with Lineup, Wyvern is the only choice.
View detail
Update to optimal position.
The best fit like OEMParts, the position is comfortable and the maneuverability has been improved. View detail
Fits: SUZUKI KANATA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
The price is high, but I am satisfied with the product.
The screw is also included for installation, and it is easy to just put it over the OEM Master Cylinder.
Also, the Gold color is stronger and more luxurious!
View detail
Fits: HONDA Rebel1100DCT, HONDA Rebel 1100, HONDA Rebel1100DCT, HONDA Rebel 1100
Good fit, enough strength for my needs.
I installed it while supporting the car body with my body.
If you have the strength, you can install it without any problem.
After installation, the car body wakes up more than I expected, but so far I haven't had to worry about it falling over even though I live in a windy area.
As for stability on rough terrain, I have plans to go camping in February 2022, so I will test it there.
Four Hexagon bolts are used to secure the STAND installation.
It does not close completely and floats slightly. (See photo)
However, since the load is only applied from the top to the bottom, the direction in which the bolt breaks (front to back of the vehicle, quantity:Pair (for Left and Right) I think there is no need to worry about it as long as you don't apply force to it (in the direction of
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Very cool!
I bought this to go with my Earls Gear Exhaust System.
I'm very satisfied with Large because it looks very cool.
The texture is great!
However, the position of the exhaust band will be a little backward, so if you are considering installation, it is recommended to replace the exhaust band before it leaves a mark on the silencer.
One thing that needs to be improved is the need for a new bolt to hold the exhaust band in place.
The bolt that comes with the Exhaust System is too long to tighten the nut because the screw is not cut. Even if the nut is tightened, the bolt is too long and not cool...
The price is good, so I thought it would be a good idea to get a Bolt1 pc as a bonus.
View detail
Fits: HONDA Rebel1100DCT, HONDA Rebel 1100, HONDA Rebel1100DCT, HONDA Rebel 1100
Is this design large and sturdy?
I should have looked at the pictures better, but the Base and Cover are in the installed state. (tentative name) There will be a gap between the two, and the length of the Bolt engagement will be reduced.
The picture in the product description looks Exactly like the surface hit, but it is not the same as the installed condition. Scam Level.
The tension between the base and cover does not hit the surface, only the bolt tension, so it may loosen due to vibration while driving and fall off if you notice.
Why is it designed this way?
I no longer trust this company called Earls Gear.
View detail
Introduced to reduce weight.
The black paint on the NORMAL was peeling off in some places, so I installed it in hopes of improving the appearance, halving the weight of the exhaust pipe from the NORMAL, and making the sound more crisp than the NORMAL.
The appearance has changed from Black to Chrome-like. I think the weight is considerably lighter, but I'm not sure if it's enough to be noticeable when running. I don't think it has any effect on the torque or power output of the engine.
Also, the AfterFirea has gotten worse. It's panting when it embraces. I'm not sure what I'm doing wrong, but since it's Injector, I don't know how to adjust it.
Exhaust pipe will turn purple or blue with heat, but it is difficult to get a clean color. I try not to pay too much attention to it, but it can look uneven and dirty.
View detail
Fits: KAWASAKI W800
Heat Guard is changed to "without Heat Guard" to use OEM product.
Since the Heat Guard is a diversion of the OEM Product, this product has been cancelled and changed to without Heat Guard.
Since my W800 has a Matte black paint exhaust system, I had to arrange for a separate Heat Guard.
With the Heat Guard, the appearance is not so different from the NORMAL, so you may want to buy this one if you prefer.
View detail
Exhaust System Replacement
I installed it on my w800 (2016). The exhaust sound is Large satisfactory in my opinion, NORMAL was too quiet and not enough, but after replacing it, I am enjoying the sound while driving, I can't go back to NORMAL.
The weight reduction makes the motorcycle feel lighter to handle.
Installation and removal of NORMAL is heavier and more quantity.:Pair (for Left and Right) When installing, the center stand stopper rubber (brand new) was hard, and only putting it in the hole was Large strange.
Exhaust pipe and exhaust system installation is done by Quantity:Pair (for Left and Right) It was easy to install them separately.
The O2 Sensor Coupler is also located in an easy to find location and is easy to remove and install.
If you cut the secondary air, the AfterFireer will be reduced significantly.
I can definitely feel the power and torque up as well.
View detail
Just the right amount of tilt.
In Japan, we have Left Side traffic, so the leaning is more large when we stop. Especially, when I stopped on the shoulder of the road while touring with a full load of luggage, I felt uneasy because it became a considerable lean. At such a time, I found this product and bought it. It is easy to install with 4 bolts.
The product is of high quality, high texture and chunky weight, and the tilt is just right, this eliminates any concerns. This product is more effective in loosening up the incline of the Motorcycle rather than increasing the footprint of the STAND. I haven't tried it on soft or sandy soil, so I don't know how effective it would be, but it would be a good idea to put some hard wood chips or large stones underneath just in case.
The price was high, but when I got the actual product, I was satisfied with the quality, and I am glad I bought it.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Dress-up and a little weight reduction
Although I hooked Single Seat+LeftTandem, only Right Tandem Footpeg was still attached due to Exhaust Bracket.
I chose this one because I was looking for something rigid that I can install AKRAPOVICJMCA and has Slide adjustment.
It was a gamble to see if I could install it. (Lol) As a result, although the front and rear of the car body can be slid, the mounting position is offset to the outside of the car body, so it is not possible to attach the pons...
I made my own Bracket. It is installed. It became the form which pushes up a little.
The adjuster for the rear suspension was also fixed to the Tandem, but this bracket also needed to be modified to make the slide as large as possible.
The texture is high quality and satisfactory workmanship. If it is this finish, there seems to be a sense of existence with a sense of luxury even in Black. However, I think that Wound is easy to stick a little, and Wound a little by adjusting the installation position. It is a work with care...
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R
LargeSatisfactory, but may not be compatible with Normal step.
I liked the design and bought it
The sound is modest, but it sounds good. I especially like the explosion sound when you SHIFT UP on the Quick shifter, Race ish!
However, if you ride with your toes on the Normal step, you will step on the Silencer with your heels, and you need to be careful...
I thought that Rear Sets are also essential to ride without Stress...
View detail
Better bass than expected
I put K-FAQ Titanium on my Z900RS, but Wyvern is better in both price and texture. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION
Beautiful finish
The exhaust bracket I was using before was not strong enough, so I replaced it. This product is very strong and well made. The finish is very beautiful and I like it. The material is Stainless Steel and it is a little heavy. The finish is beautiful. The finish is beautiful. View detail
Riding Position has improved.
Height 165!
I put this on …ツ-Ring and the pass is good!
View detail
Fits: KAWASAKI NINJA400 (2014-)
Because I hate OEM Exhaust System very much.
I am satisfied with the sound like MachineGun. View detail
Fits: HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports, HONDA CRF1100L AfricaTwin, HONDA CRF1100L AfricaTwin AdventureSports
I feel so much better.
Before I put it on, it was very heavy to cause, but after I put it on, it became very easy.
I wish I had put it on sooner.
View detail
Fits: HONDA CBR400R, HONDA 400X, HONDA CBR500R, HONDA CB500X
I still want to replace the Exhaust System.
Exhaust System wanted to exchange and consulted with the pocket, it became Slip-on Silencer, because it was Slip-on Silencer, excessive performance up was not desired, and it looked at the appearance and the weight reduction and chose it.
After all, the appearance becomes another thing.
I wonder if the performance is better with better acceleration due to the better release? ????Honestly the difference is in the mind.
I don't think the sound is explosive, I think it varies from person to person, but it's a sound that makes me feel good.
View detail
Pricey but good stuff.
The F900XR is a Germany car and the lane is reversed, so the inclination of the road is also opposite to Japan. Therefore, the inclination is hard, and the fear comes out when parking. If I get used to it, it will be good, but I buy it for the sense of security in the case of emergency and usually. I used the one made in China which is not so thick in the first stage, but the effect is different by far. Because the inclination at the time of parking changes to the same Level as a domestic car, a sense of security is obtained. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Just right.
I think the color of Titanium is also good for Parenthesis. I think the color of Titanium is good. View detail