Reviews
Fits: YAMAHA XJR 1300
To Knee grip
I chose EasyGrip, but it didn't have enough grip. I am a good flyer, so I think it would be better to choose a product with a higher Grip for such a person. View detail
As expected, but I think it's too expensive.
Knee grips are excellent and easy to do, and there is no gapping after installation, but they are too expensive, no matter how reliable the product is. View detail
It's cuttable, so you can make it the way you want it.
I like the fact that I can cut it myself, so I can make it the way I like it.
However, it is difficult to cut it beautifully! You have to use a sharp knife to cut it.
View detail
Difficult to process, but the grip is perfect.
This is Type, which you cut and paste by yourself.
As for processing.
It's difficult, so you might want to practice a few times with the parts you don't need. (I should have). 。
I used the Cutter and Scissors together, but the circle is thicker than the other two.
It is difficult to cut straight because of the repetition of areas where the blade can easily enter and areas where it cannot.
I would like to have some kind of cutting machine to position and cut them all at once.
Also, keep replacing Cutter blades with new ones.
As for pasting.
Of course, it's a matter of friction and unevenness.
It's hard to rub it with your fingers after applying it to make it stick. (Eliminate air bubbles) It's hard to do.
If you make a small mistake while applying it, you can reapply it, so apply it loosely.
It is a good idea to keep them close together in a certain place.
It may be similar to Decal paste.
In conclusion, Black is good.
There is no problem at all with peeling. It will be quite large and strange when you peel it off.
As for the texture.
I think it's just like the image. It's not particularly good or bad. It's good enough.
However, I made the mistake of buying the transparent Seat. It should have been Black, which would have made the bubbles invisible.
(I thought that Black would look like White as it deteriorated.)
Transparent Seat is suitable for White and Color:I think it is a light color like Gray.
Knee grip is necessary for correct riding form, and
Since you need to make sure to Form and drive safely even in Touring and city driving.
I would like to see Manufacturer sell a special product for all models that can be called a Sports car with Option.
Lastly, the seat size is listed on the Page of the product description.
In fact, it comes with two Seats of that size.
I bought it because I knew about it in advance from my personal Net information.
If I hadn't known about it, I wouldn't have bought it.
I think it would be better to put this information on the website.
Evaluation items "Use Situation." is between Touring and Circuit for convenience. It is valid for everyone.
View detail
Fits: KAWASAKI ZX10R, KAWASAKI ZX10RR
The box is bumpy, but the performance is good.
The product I received was battered and cracked in places in the box.
The EAZI-GRIP Round Type Seal inside has a paper bag with a cleaner attached to it.
The peeling paper stuck to it when I took it off and it was dirty.
The Tank Pad is not particularly problematic, but I still don't feel good about it.
Even if it is made in a foreign country, I would like to see at least a minimum check before shipping.
I've used a similar Tank Pad in another car and the Grip feel is excellent.
It's easy to get a knee grip on the slippery tank, so you don't have to use any extra force.
I think there will be a big difference in the way you get tired after long hours of riding if you have it or not.
I am sad to say that the packaging was in a disappointing state for a good product.
View detail
Inexpensive and strong adhesion … scary to peel off
I have been using the Tank Pad of TECSpecifications for GSX1300R HAYABUSA before and felt the necessity of the Tank Pad, so I tried this Tank Pad for my current car.
I'm in the All Pen. [Color] Select Clear, Body is [Color] It's a clear color, but it's a little yellowish for my color because of the pearl condition;
The texture is pricey, the adhesive is super strong and TECSpecifications can be reapplied, but if you peel it off, wrinkles may occur and the paint may be damaged.
It does the job as a Tank Pad with quality at a reasonable price.
Please don't refer to the picture because I don't have one for my model and I use other vehicles.
View detail
Fits: HONDA CBR600RR
It's a very ordinary Tank Pad.
I used it on a 2013 Repsol color.
It's a very ordinary Tank Pad, not too much, not too little, not too much.
It's built for the type of car you're driving so you don't need to do anything to it.
View detail
Besides that I am satisfied!
To be honest, I thought that Knee grip is ok without it, but I introduced it in the sense of prevention of scratches.
In fact, I found Knee grip easier than ever with scratches! But it was better not to be this wartime booth in design, but abandoning that there is no stock.
View detail
Round Position?
Height 172 cm. Inseam Ordinary? Winter Over Pants It is useful because it does not slip when using Pants. Also, I think Riki should be able to do Knee grip first! It will be useful at full acceleration or full Breaking! View detail
Fits: TRIUMPH DAYTONA 675 , TRIUMPH STREET TRIPLE
I need hang to work
Since the protection color Seat is stretched on the adhesive surface, it is easy to misunderstand because it does not look like Clear in the reaching state.
Clear type requires careful work for pasting. Since the adhesive surface is visible, careful removal of air bubbles or the like from the edge will result in poor appearance. Bubbles are easy to pull out when working to press it with your fingers little by little from the edge.
As I saw in the previous impression, it is certain that there is a cut-off feeling at the end, but it was not enough to care. There is something that you purchased on this premise that you cut this side by using other types of cars and using it. It would be better to avoid people who care about details.
Performance (Grip feeling) I just sat on Seat but I felt that it was right..
I thought about whether EPO solution was something because Tsubutubu was Large, but when I tried to paste it did not make me feel so strange.
However, it depends on the shape and color of Tank, so it is better to consider Large size and shape of Tsubu firmly.
View detail
Fits: KAWASAKI ZX10R
Attention to the curved surface
Purchased because it was somewhat cheaper than other Tank Pads
There is a commentary movie for installation, but it is very easy to install. It is safe also for beginners as it can do without imposing excessive repositioning
Feeling is Soft and I feel like rubbing even Denim fabrics for now. But I'm satisfied there because I can firmly hold it.
However, when attaching to the curved surface so as to be dented as a caveat, we recommend that you adhere Pad slightly to the curved surface as the curved part will float after a few days even if it is in close contact.
View detail
Fits: SUZUKI GSXR1300R HAYABUSA
Recommended for strengthening Knee grip
Although the model is different, I attached it to the ZX - 6R which I usually use for GSX 1300 R HAYABUSA. The shape did not meet Exactly, but it is very effective in actual Riding. Motorcycle and the body became one body, less BodyAction was effectively transferred to Motorcycle, and the controllability has been significantly upgraded.
Breaking at the time of Breaking is also the most favorite Items. At this price this performance is recommended.
View detail