Reviews
![Four Line Driver Regular Type [-6 X 150]](https://global.webike-cdn.net/photo/impression/90/909680ca5cf922c7c41fbfe2c738d7a8L.jpg)
"Normal The sense of security of
It's a very ordinary Driver.
However, unlike very cheap products, there is a sense of security that can be taken for granted without any modification.
Shank and Grip are solid, Plating is clean, and durable. I've been using it quite roughly, but there are no cracks or chips in the grip or the tool tip. The tip is worn out.
If you are not a fan of the thicker grip end for fast turning, this one may be easier to turn.
It's not like a hundred-yen tool or a BALI, but the tool tip has a little edge, so if you use it roughly, it might scratch the object.
View detail
One and only
The world's standard slotted screwdriver.
Ordinary slotted screwdrivers have a tapered tip for ease of insertion, but PB's patented parallel surface finish on the tip of the tool allows it to fit perfectly with Minus screws for machines, many of which have parallel grooves.
Grip is like a rough rubber. I think it is not slippery, but there is not a sense of luxury at all.
It was just unpopular with the old Plug lip. "Ewoks." You don't have to worry about your toolbox getting smelly.
View detail
You don't have to, but it's definitely useful to have.
Such a delicate tool Coin driver.
Well, it's a lot better than twisting a dime and bending it.
It's not priced so low that you'll hesitate to buy it, but it's not so cheap that it won't add to your shipping costs either.
View detail
![Ball Point Hexagon Wrench Driver [Opposite Side 3 X 120]](https://img.webike-cdn.net/catalogue/13962/4962485020743_1_TS.jpg)
In OHLINSFork's Setting
[How is it used?
I bought this for the OEM Front fork damping adjustment from RSV4 FACTORY.
How was your experience with it?
I used to use the Wrench from Hexagonal Wrench Set, but it was difficult to use.
At that time, I saw other people's impressions and thought it looked easy to use, so I bought it.
Since it is a Driver type, it can be turned lightly.
[Points to note]
Since it is a ball type, you can approach from many angles, but if you apply too much torque, the ball will come off.
Also, I wanted this size for suspension setting, but I bought other size by mistake before, so please look at the size carefully when you buy!
View detail
Heavy-duty Slotted screwdriver
Purchased to loosen a hard Minus head Bolt.
Tip Tough
Grip section Tough
Grip is rugged and slippery.
The Bolt head is firmly in place because of the
The hard Bolt loosened immediately.
View detail
For Maintenance
When I was using PlasticType, it was broken, so is there anything good? I was looking for something better, and I found this one and bought it.
You can switch between Straight and T-Shaped, which is nice and easy to use.
In my imagination, I was imagining a little more Small and thin, but it was a little Large. I was thinking of using it with the on-board tools, but it seems to be a bit in the way.
I thought that the grip was not good when tightening unless it was this size.
View detail
It also loosens the hard screw.
It is the best for loosening the screw which is rusted and hardened, and since it is a Penetrating Driver, it can be tapped with Hammer and bite firmly even if it is licked and the tip does not slip, so you can apply Torque firmly. View detail
![Pencil Type LED Auto Tester (with Cord)[6~36V].](https://img.webike-cdn.net/catalogue/13962/4962485211059_1_TS.jpg)
You can find the power source safely.
This Inspection Tester is indispensable for the installation of electrical components. It is useful to find the permanent power supply or attachment power supply from the harness of the vehicle. If there is a power supply, the LED on the body will light up, so you can find it easily. View detail
![Super-short Mini Star B Double Head Replacement Driver [-6 X +2 Double Head Bit ]](https://img.webike-cdn.net/catalogue/13962/4962485023065_1_TS.jpg)
Effective in tight spaces
Effective for use under the body of a motorcycle or in tight spaces where there is no clearance. It is easy to turn with just your fingertips, and if you have a firm grip, you can turn it with a strong torque. View detail
![Ball Point Hexagon Wrench Driver [Opposite Side 4 X 130]](https://img.webike-cdn.net/catalogue/13962/4962485020750_1_TS.jpg)
Convenient when you want to tighten and remove lightly
[How is it used?
I bought it mainly to dampen the Suspension, along with the other Size, and wow!
I didn't check the Size carefully, so the Size didn't match.
How was your experience with it?
I didn't get to use it in the area I originally planned, but I am using it for simple exterior Bolt loosening and tightening.
If it is a screw of this size, I thought that Torque of the range that can be used with this is enough.
[Points to note]
It's a ball shape, so if you apply force with a high Torque, the head will probably come off. Yes. It will come off.
How did it compare to other products?
This time SizeI bought the wrong one and found a use for it in another place as a result, so I don't think it's particularly necessary if you have a regular hexagon.
View detail
Saves you the trouble of disassembly
It is useful for loosening and tightening the Plus screw in remote places. If it is a normal driver, it can reach directly to the place which cannot be reached without disassembling the surroundings, and Grip is easy to grip and can hang Torque firmly. View detail
It's huge.
I bought it because I thought it would be useful.
Although we don't actually have many scenes to use
It can be used as a hole drilling tool by attaching a hundred-yen drill blade.
Because the body is large and the grip is thick, it can be opened straight with force.
It's not the original use, but it's useful depending on how you use it.
View detail
Easy to grip, though.
It is not suitable for twirling.
The accuracy etc. is preeminent, and it is as if it is KTC.
You can turn the part with force without worry.
However, it is a little large pattern to use for motorcycle maintenance.
I'd like to see a small one in the line up too.
View detail
Purchased to match the Plus
Purchased to match my Plus Driver.
Square Type is easy to grip and easy to apply force.
It's a good shape for the Minus, which is prone to nicks.
But! Because the pattern is large, it is not suitable for tightening the exhaust band etc.
It might be a little disturbing.
View detail
SK11Coin driver
I bought the SK11 Coin driver. Until now, I had been turning it in the appropriate way with Gold. I bought this driver and was able to turn it very comfortably. I'm glad I bought it just because I don't have to look for the right one. View detail
![Super-short Mini Star B Double Head Replacement Driver [-6 X +2 Double Head Bit ]](https://global.webike-cdn.net/photo/impression/06/06b79cd0c8c0d6d0d47dfbce0b8bb8d9L.jpg)
CowlScrew Removal
I wanted something compact for removing Cowl's screws and I found this one, it is very useful for removing and installing screws in places where there is no space or where tightening force is not necessary. View detail
Standard Driver
The VesselBrand is the best choice for the amateur and veteran. I always use VesselBrand because it is a product that I am sure to choose, and I can use it safely for a long time because it is excellent in durability. View detail
KTC Screwdriver
An excellent tool for the money. The handle feels good to use. The tip is nicely machined and fits into screws perfectly. I would not hesitate to spend the little bit extra over the competition to use a well-made Japanese tool. View detail
KTC is the best
It is easy to grip, the rigidity is high, and it is hard to lick the screw, and it is a first-class product indeed. View detail
Special tools for carburetorJet
If you think that the carburetor jet is just a small Minus, you will be hurt. A small scratch can cause the air funnel to break, and a small scratch can cause the flow velocity to change, destroying the normal mixing ratio. View detail