Reviews
ใช้งานดี ดูมีสไตล์ แล้วจาสั่งอีก View detail
Dress-up
There are many effects, but OEMCook...
For dress-up because of yabo
Installed. It looks very
Well-organized and satisfactory, but perish Brown bitter Brown
WhiteRust is easy to find.
View detail
May be easy to loosen.
I bought it because it is a Pressure Resistant, Oil Resistant Hose.
Leather mesh inevitably tends to unravel at the edges.
Well, that is acceptable.
The problem is that the inside Hose might be easy to loosen.
I used Oil Resistant Hose from KIJIMA or DAYTONA without Clamp and it never came loose.
I wonder if that is Minus.
View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
Essentials for old cars
Aluminum is a good material because it is resistant to heat and cracking, lightweight, compact, unobtrusive, and does not get in the way. The aluminum tanks are heat and crack resistant, lightweight, compact, unobtrusive, and unobtrusive, and they also free the carburetor from frequent clogging, which makes for a refreshing feeling of relief. View detail
Oil hose replacement
Oil hose cracked and replaced. View detail
Fuel Hose
CRM's Fuel Hose was cracked and was replaced. View detail
Required for PinGel
When changing to PinGelCook, be sure to
You will need it. Quality is quintessential, no complaints.
But PinGel is also moderately priced.
The price is a little hesitant to purchase this one at the same time.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
tl50 isn't in the fit, but it's perfect!
I thought, "tl50 is not compatible, but it's a Honda, so if the screw diameter is right, it will fit! I half gambled and bought it!
The diameter of the Fuel Cock section of the tl50 is 14mm.
This is the same APE Tank I used to tinker with, so I knew it would probably get there!
If you measure the screw diameter with Caliper, I bet you can use it for the most part.
Motorcycles over 40 years old are amazing! The packing of the Fuel Cock is so chica like plastic and not even half of it is left!
Good thing Packing was planning to change everything.
I'm afraid of Gasoline leakage if I run like this.
It can't be!
Comparison with OEM
OEM is easy to understand because On, Off, and Reserve are written in letters.
I know this item, Off, because only one notation (circled) is different!
But On, is Reserve a pictorial notation? Pictographs?
I don't know what to look for in such a Д゚ Mark…
You have to remember intuitively where the cook twists!
The plastic tube like a filter is attached to the top of the Fuel Cock. However, when I installed it on my tl50, it would not fit in the tank with this Filter attached, so I had to pull the Filter out and leave the tube inside!
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
Since it interferes with
I used to use a fuel cock from company T, but it didn't last six months and leaked even when the cook was turned off, so I decided to buy a KITACO fuel cock.
If it leaks in a short period of time, buy OEM like Large people.
The cook outlet can be selected to be forwarded, which is nice because it eliminates interference even if a big carburetor is installed.
View detail
สิ้นค้าดี มีคุณภาพ ส่งไว View detail
Very well.
Nothing to say about the fuel tap of the kawasaki 750 zephyr. Perfectly replaces the original gauge without any unpleasant surprises. -------------------------------------------------- -------- Nothing to complain about the gas tap of the Kawasaki 750 Zephyr. Perfectly replaces the original gauge without any unpleasant surprises. Powered by Google Translator View detail
To old Motorcycle because the inside of the Tank is also old.
It's good for Carburetor Vehicles because you can see the Gasoline movement. View detail
Satisfied
Good cost with 3 different sizes View detail
Looks like they're improving. (^^) Used for 4lInitial Model
I didn't like the Cook on the bottom out and ended up here.
First. RES-OFF-ON." is strange! I have heard that the display of "☆" is strange, but it seems to have been improved, and the one I purchased had the characters in the display. The image is also before the replacement.
I had no problem installing and using it. The switching operation is also well done, and I personally do not feel that it is cheap, etc.
Incidentally, I did a rose before installation, and the internal packing is also in line with the OEM, so I am not worried about the after installation.
I was curious.
There is a BALI at the Cock outlet and the inside diameter is narrow. The intake port at the time of ON is narrow and it seems to be hard for fuel to fall out. The mesh part of the Strainer is high, so fuel may remain.
Right. Well, as far as the others' are concerned, I guess there is no problem….
View detail
Filtration capacity is unknown but to prevent Rust contamination.
[How is it used?
TZr250R (3XV) It is used for
Although 10mmSize Filters are hard to find, we chose this product from Brand, which is one of the most inexpensive and reliable.
Was the one you received as per Image?
It is larger than expected and takes up rather a lot of space.
L-shaped would have been better,...
Was the installation difficult?
It is simple to interrupt the Fuel line.
There is a direction, so you need to make sure that you do not make that mistake.
How was your experience with it?
I am not sure if the Filter is working properly, but so far I have not had any problems.
The transparent body allows you to check the internal condition of the product.
How did it compare to other products?
I've also used Daytona's Filter, but I'm not sure of the filtration capabilities of either!
It is safe to put it on an old car for now.
[Points to note]
Only the mounting orientation must be taken care of.
Also, be careful of the size, as it is quite large.
【Review】
I don't know about filtration capacity, but I guess it's better than nothing. I think it is.
10mm filters are not so common, and not many manufacturers offer them, but we were glad to find them in the lineup.
View detail
Yoshi Yoshi
I don't know if it was ordered from overseas or if it was a Corona thing, but it took a few months to arrive.
The construction and texture are very good and I think it is a very good value.
It has only been installed for a short period of time, so we do not yet know how durable it will be.
The vehicle is D1, but with Cook in the OFF position, the positional relationship is such that the Limit does not hit the Side cover.
View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail