Reviews
For a little shock absorption
I purchased and installed this product to absorb the vibration of my Master tank.
I don't know if it has any effect, but I think it's better than nothing.
View detail
Made by POSH for peace of mind
I bought a used Slash guard for XJR400R, but it didn't have Nut and Washer included, so I substituted them with this one.
I chose Black to match the color of Nut and Frame, and I chose the one made by Posh which is a reliable manufacturer because the one sold in Home center etc. is questionable in quality.
The color of the product is also Black, so it does not stand out strangely, and I am very satisfied because it is made carefully and is inexpensive.
View detail
Ordinary CrashWasher
It's a regular CrashWasher.
It is also called Gasket.
This Washer is made of copper and seals the Bolt seating surface by collapsing under the tightening axial force.
Since it is basically non-reusable, it is inevitably needed when loosening the part where CrashWasher is used.
The inner diameter is 10mm, so the size is used for general brake line.
There are two types of CrashWasher, aluminum and copper, but I personally prefer the copper one because it is easier to identify the CrashWasher by its appearance.
I've been using these for years simply because of their availability, and I've never had any leaks.
Because the damage when it leaks is extremely large and repair is troublesome, I think that it is better for mental health to use the thing of a famous place though the thing which is less expensive is seen here and there as for CrashWasher, especially when it uses it for Brake line.
View detail
Used for H2OEMReserve tank
This was used when the H2OEMReserve tank was installed.
CinderellaFit. It is Bolt On with no processing.
It comes with two pieces so you can use the other one as a spare, if you buy the OEM one it will cost you about 1,000 yen for the Rubber and the color. The appearance is almost the same. You can get it here without hesitation. I didn't like the Silver Washer that came with it, so I changed the Washer.
View detail
Fits: YAMAHA Day Version 400, YAMAHA XZ400D, YAMAHA XJR400, YAMAHA XJR400 S, YAMAHA XJR400 R, YAMAHA XJR400 R II, YAMAHA XJ750D, YAMAHA XJ400, YAMAHA XJ400 ZS, YAMAHA XJ400 ZE, YAMAHA XJ400 E, YAMAHA XJ400 D, YAMAHA T-MAX, YAMAHA T-MAX (FI vehicle), YAMAHA SRX250, YAMAHA SRX250 F, YAMAHA FZ750, YAMAHA FZ400R, YAMAHA Day Version 400, YAMAHA XZ400D
RCEngineerRingExhaust Gasket
And the price! I think the quality is good too!
I would use it again.
View detail
FashionParts are completely for looks only.
I bought this as a Washer for my Master tank. It's a highly visible part, so it's highly self-contained. Is anyone going to notice it? It's Level, but it's okay! God is in the details! Titanium, Carbon, Forged and Cut-out are just some of the words that excite me when I hear them. Let's use them in your favorite places. View detail
Oil change essentials
Used on a cbf125. I use it all the time and it is reliable with no leaks at all.
Stock because it makes me sad when I forget to buy in Oil replacement.
View detail
Brake line copper crush washer
Months after originally installing my black HEL performace braided brake lines I decided I wanted a different colour so removed these and transfered the used braided brake lines to another bike. I wanted to make sure I had no issues with the second install so purchased new copper crush washers to ensure they sealed correctly on installation. Product supplied from HEL as expected at a good price and perform as required. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Due to discontinuation of OEM Parts
I bought this product because OEM Parts was discontinued.
This is a small part, but without it, you cannot fix the Light Bracket.
I am grateful that Ripro has released these Parts.
View detail
Inch is a
I've been looking for it in stores, but I can't find it, so Large is a big help. View detail
Inch is
It's not available in stores, so it's a big help. View detail
Spare
I keep it in my toolbox at Spare. View detail
Spare
I keep it in my toolbox at Spare. View detail
Single Item sales are helpful.
Drain Washer by Harley39?Fork.
This is a Single Item sale and is very helpful.
View detail
I want to replace it when I replace Oil.
Harley39?BottomBolt Copper or Brass or Washer for Fork.
This product is also an oil seal and should be replaced when removed.
It is very good that it is sold Single Item.
View detail
Crash washer is the only choice.
[How is it used?
Since I changed the Master Cylinder of YZF-R25 used in the race to bremboRCS
Changed the Banjo bolt on the Master Cylinder side from 1.25 to 1.00 Pitch.
I used it in that case. The number of sheets used is two.
How was your experience with it?
Hose and Banjo are produced by ACTIVE, and I chose ACTIVE because they are Goodrich products.
It may not be a problem with otherManufacturer, but I feel confident that I can use it without any problem in outer diameter, inner diameter and thickness.
Note that due to the thickness of the Banjo bolt and the thickness of the Banjo, the thickness of the Crash washer that can be used will vary.
How did it compare to other products?
I would recommend copper over Aluminum, although it is a different product or Material.
If the aluminum is too corroded, or if you want to adjust it a little, you can loosen and tighten the Banjo bolt repeatedly.
This is because they wear out more quickly than copper ones.
[Points to note]
Nothing special, just note the Banjo bolt and Banjo's Size!
View detail
Copper Washer for DAYTONA High spec line Brake hose
I use DAYTONA High spec line brake hoses for my motorcycle and my motorcycle buddies brake hoses, and I think Copper Washer is good because High spec line Banjo is Steel. I have been buying Copper Washer only for many years. View detail
of high quality
I used it as a substitute for the Windshield mounting Rubber Bush.
It is high quality and will last a long time.
Most importantly, we appreciate your help in providing these Replace parts.
View detail
No problem at all.
The GPZ900R has two oil drain bolts, so two bolts are used for one oil change.
The product comes in a 5-pack and a 50-pack, but I thought I wouldn't be able to use up the 50-pack, so I bought the 5-pack again.
If you think you will change Oil once in 6 months, it is for 1 year.
If I were selfish, I'd have a six-pack, which would be three times the amount.
No quality problems at all.
View detail
To stop loosening.
This can be used when the Mirror turns on its own, or in areas where the SpringWasher cannot be used + you want to tighten it more. View detail