Reviews
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
DAYTONA's License Plate Holder
[How is it used?
When I was walking around the body of the car during the delivery description, I hit my knee on the Number and promptly bent it. It was very Shocking and I wanted to get a Holder.
Was the one you received as per Image?
The board is 3mm thick and quite sturdy. The color is also good as it is Black, a tightening hue.
Was the installation difficult?
No special skills are required. The mounting hole is also a LOOSE hole.
How was your experience with it?
There is no need to worry about hitting someone and injuring yourself. The plate hole on the side is especially useful as a place to hook a touring net.
[Included Parts:were they on?
None
Point and hang of installation
In my case, the existing bolt length was not enough due to the thickness of the license plate and the plate for installing the DriveRecorder. (Photo ?) So, I used M6×20 GoldQuantity:The Nut is an existing one. To be safe, a screw stopper (weak) was used in combination.
View detail
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
One for One point
I purchased the color that matched the body color for one point around the rear. View detail
Fits: Others Universal
Refreshing
I bought it because the Number was bent without me noticing.
Black on MONKEY125.
I think it is good that it is slightly larger than a number, not too conspicuous and reflecting.
It is too short for the included Screw when I put on the Sponge to prevent resonance.
View detail
Fits: Others Universal
Attached Screw is too short.
MT-25, but the Screw is too short when I put Sponge to prevent resonance.
I have put a Screw lock on it to stop it, but we'll see how it goes.
Others are satisfied.
I think it is light, meatless, and well designed.
View detail
License Plate tampering prevention
Installed to prevent tampering with the License Plate.
I am satisfied with the natural finish without the aftertaste that I was aiming for.
View detail
Security, looks, expandability
I wanted to include a Cali Sticker Plate, so I attached it to the local Number with the company's Torque screw 25mm and 6M× diameter 18mm× thickness 3mm Spacer, which is sold separately.
Note that the Wrench for the Torx screw (sold separately) has only one tinkering hole.
View detail
Hara1 Local Number only
We purchased this for our Hara1 local Number.
Fit the local Number with no problem.
We recommend that you measure the dimensions of your local number in advance.
Width is as in previous Impression.
View detail
Fits: Others Universal
It may not be attached depending on the individual Number.
[How is it used?
I purchased this product as a vibration countermeasure for a single cylinder.
Was the one you received as per Image?
Yes
Was the installation difficult?
Fixed with Bolt, so it's easy
How was your experience with it?
I was disappointed that it didn't fit tightly in the Frame, perhaps due to individual differences in the Number.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Not sure if the 250cc Number will stick securely (L Size)
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It is indeed AELLA!
2023 Installed on a BMW S1000RR.
After all, AELLA products are well-made and feel firm even after installation.
It was very refreshing to be able to install the RCameraetc. on the stay for the Blinker.
View detail
Requires slight modification for vehicles with more than a standard motorcycle
Purchased for the Bracket effect + mud repellent effect.
The mounting holes of the product are positioned to match the license plate of Small Type motorcycles.
For vehicles with two standard wheels or more, Quantity:Pair (for Left and Right) The mounting holes of the "A" can be shaved outward by about 5mm to allow for mounting.
The size of the product is the same size as a license plate for a standard motorcycle or larger, so there was no discomfort in its appearance.
View detail
Cannot be installed on Crossfire125xs
There is nothing wrong with the product itself.
I had installed Plate Hook 3 on my SEROW250 and liked it so much that I purchased this product for my Crossfire125xs, but the License Plate Light interfered with it and I could not install it.
View detail
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Red is good for PinkNumber
Purchased Red for my moped2 PinkNumber because I thought it was a good choice for my moped2 PinkNumber.
I am satisfied with it just as I imagined.
View detail
Gorgeous because of its color!
We replaced it incidentally when adding a Hook around the License Plate area.
The Torque bolt has a flat plate screw head, low volume, and a thin aluminum tray for a clean look. The aluminum tray is also thinner and looks more stylish, whereas a normal bolt looks rugged.
You will need a T30 Torque to install it, but it is not included with the product. It would be a waste to buy it just to install this, so we recommend checking to see if T30 is available beforehand.
View detail
Paint is weak
The paint feels weak. The color is beautiful, but the paint is weak and even the slightest thing seems to scratch it. View detail
Material:Lighter than Aluminum and installed.
[How is it used?
Material:This is a replacement for an Aluminum Holder.
Was the one you received as per Image?
The design is good like ZETA and fits ADV160.
Was the installation difficult?
License Plate BoltQuantity:It is only a 2pc detachment.
How was your experience with it?
Material:Since it is plastic, it is lightweight, which will reduce the burden on the mounting area.
[Included Parts:were they on?
Bolt set is included.
[Was there anything that disappointed you?
Not particularly
As with all ZETA products, Sticker's Quantity:I think it would be nice if you could add at least 1 pc.
View detail
Fits: Others Universal
Not only does it protect the License Plate, but it also looks GOOD!
[How is it used?
It is installed under the 250ccMotorcycle License Plate.
Was the one you received as per Image?
It was very nice!
Was the installation difficult?
A Hexagonal Wrench and Spanner are all that is needed for installation.
How was your experience with it?
I like it very much.
[Included Parts:were they on?
Four Seals for vibration isolation and Attachment for Bolt and Bolt were included.
[Was there anything that disappointed you?
Not particularly
View detail
It's normal
Can be installed normally.
However, I think it would be troublesome to clean it if it gets dirty.
View detail
Anti-theft and dress-up
I use it on all three of my motorcycles. It is a good anti-theft measure and also has a dress-up effect. Highly recommended. View detail
For vehicles registered as Class 2.
I installed this on my class 2 registered VINODELUXE and I think it is a must have for a class 2 registered moped. I am glad that the Triangle Mark Sticker is included so I didn't have to buy a new one.
The finish on the corners of the Holder is not good. I was also concerned about the weight of the Holder itself, but it might be good for durability.
View detail
Fits: Others Universal
in a fashionable way
[How is it used?
Installed on Yamaha's WR155R.
Fender Eliminator is installed, and since GIVI Bracket is installed, the Blinker is relocated to the Number.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is co-tightened with Number, so it can be installed immediately.
The Frame is attached to the Sponge like a vibration, but the Number is placed on top of the Sponge, so the Number is not completely covered by the Frame, but is attached to the Image as if it is floating.
It does not seem to offer that much protection in the event of a fall.
How was your experience with it?
Stylish and good.
Reflector is also included, so no need to retrofit. Good shape.
[Included Parts:were they on?
Sponge
[Was there anything that disappointed you?
I want to feel more protected!
View detail