Reviews
Purchase
I purchased this DAYTONADAYTONA Mirror Stopgap Cap Bolt as a fixing Bolt of Tank Bracket of Clutch master. Originally we used Cap bolt in the form of a Taper to avoid contact with Cowl but it was pretty Limit and the position of MASTER was Quantity : Pair (for Left and Right) I was not able to change to this DAYTONADAYTONA Mirror Stopgap Cap Bolt is a Button type and so Co
View detail
Ordinary goods
Mirror 's Screw hole does not allow water to accumulate.
It is a terrible Cap.
I wish Colored was better ^ _ ^;
But it is better than rusting.
View detail
Fitting and texture as well ○
Purchase because it is necessary to remove Mirror on Circuit run. You can respond with Tie Wrap, but I also want to make it look cool. Was it perfect if Bolt was Aluminum Bolt of the same color as Body?. View detail
Bought with BAREN Mira - Bolt's hole purchased together Hidden
Ideal for hiding Mira-Bolt holes.
I think it's pretty good so I do not think I can get it unexpectedly.
It's a bit of a thing, I think it looks pretty refreshing as it appears.
It is good for prevention of dirt of Cap bolt hole by dust and Garbage ingress,
Since Mira is Plating, it is obviously purchasing a thing of Plating.
I am really satisfied..
View detail
Very neat look with this nut cap. Brought a APE mirror to use togather with this nut cover. Overall look very neat. The nut cover provide anti rust protection for nut.
Very neat look with this nut cap. Brought a APE mirror to use togather with this nut cover. Overall look very neat. The nut cover provide anti rust protection for nut. View detail
To accompany Bar end mirror
Purchased for filling up the Mirror hole and securing the separate MASTER's Reserver tank as the title changed as Bar end mirror.
?Good point?
- Parts for niche, but it is nice to firmly lineup
- Dress-up Unlike the object of reservation Tank and smash mountetc. Can be fixed
?I like it?
- high
- Originally it was black, but as the days passed, moisture etc etc. It attacks white like white
If you buy DAYTONA's separate MASTER 1pc. Although it is attached, I was looking for the same thing because I wanted to use it for plugging in the Clutch side and fixing the smart mount.
Screw1pc. Although it is rather expensive to think, it is useful because it is rare Screw.
I will try Repeat again when it corrodes in earnest.
View detail
The outline is - - -
It is not suitable for CYGNUS X because the outline is Small, because the Length is insufficient. I want you to make Length a bit longer to make it more universal. If you sell as Universal Product at product development you should study each Manufacturer Motorcycle more. View detail
Used for blindfold of Mirror hole and fixing of Option item
We introduced Bar end mirror so we bought the original Back Mirror hole for blindfold and MASTER Tank and option item fixation.
?Good point?
- Even if there is no tool, make it easily detachable if there is a coin
- Anodized color is beautiful
?I like it?
- nothing special
In addition to blindfold and MASTER's Tank fixing, Smartphone Holderetc. It is useful because it can also be used to fix the Option item of.
Even if it gets faded or deteriorated, even if you get tired of the color you are wearing now, you can feel comfortable with a conscientious price setting that you can buy easily without hesitation.
In my case I gathered Small items in Gold according to GoldFork, but I felt better when I bought Red with purchase color.
I will repeat the same thing again if there is to buy again.
View detail
It is a completely self-satisfying world
Since we replaced Mirror of SEROW 250 with Other Company Product, we have purchased this product because OEMMirror mounting holes are no longer needed.
I made it to Gold according to Wheel's Gold, but I am satisfied with a shade that is quite close to the ideal.
It is not related to the performance of Motorcycle at all, but it is a place to attach to Medium Eyes driving.
The brake lever side of SEROW 250 is Opposite Thread Screw.
Because it is a difficult point that the price is high, it is a star deduction point.
View detail
this is good!
Exchange with the company's Custom square mirror
When attaching, remove Screw of the Mirror part and pass it through Bracket and it is wearing
After image Left is attached
Right before installation
If you do not attach this, it looks like it is not good ...
Something on rainy day is raining from the gap
It solved it all!
I think that there is liking in appearance, but it is good with an OEM look!
Afterward Universal's Wind Screen
When buying cheap things here, Mirror Adapter is also rough and making color is Silver color and ...
Well, it is cheap like the price
It is planned to transplant what was attached to APRIO as it is, but this is also good as just to hide that cheesy Mirror Adapter with this Stay boots!
Until before I removed the OEM and transplanted the OEM attached, but there are also OEMMirror that I can not do so it is awesome to say that these items are being lineuped
Mirror Please come along with us!
Recommendation!
View detail
Gem of attention
【Deciding factor of purchase】
- Because 10 mm ButtonHead's Bolt used was rusted
[Try to use it actually]
It is hard to understand with the same color as the Bracket kind, but since the Head part has a special shape, it is better to make it fancy.
[Is there anything I was disappointed about?]
- Since the Head part became Smaller than Bolt of ButtonHead which was attached before, the color bald Touch pan of the tightening Wound of the Bracket part became necessary.
【Hope for Manufacturer - Improvement points
- I did not need the thin stick of the attached stuff so I wrote the method of tightening and thought that it was better to make it cheaper as not included.
【Have you compared items?】
- The company's MinusHead's cover cover and a commercially available 10 mm Black Button head bolt (Material : Aluminum or Stainless)
[Others]
- This time I exchanged both Bolt of Clutch and Brake. I thought that Bolt of ButtonHead on the market is inexpensive and proceeded, I thought about finishing the part of rust with Touch pan etc., but this Bolt's shape was good, so I tried stuck.
View detail
GOOD if it is a little cheaper
I used a suitable Screw so far, but it gets rusted and gets pulled out
I used this hole CoverCap.
It was a price I hesitated a little, so I could not buy it. I hope it will be a little cheaper..
Good-looking is also good, rusted and it will not come out, so it's a good shopping
I think that it was.
View detail
Recommended as Billet parts
【What made you decide the purchase?】
Simply filling the Screw hole & Bracket is fixed, but because the design was good.
【How was it actually used?】
It also has a good texture, and I do not betray the expectation of Manufacturer made by POSH.
【Was it difficult to install? (Hard parts case)】
It is simple because it screws.
Just the attached Wrench will be supplementary only for installation.
The necessity to be Wrench is thin.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since it is AnodizedParts, Overtorque at the time of tightening tends to lead to peeling etc, so will it be installed with moderate force.
[Is there anything I was disappointed about?]
Nothing in particular.
With a little expensive ...
I feel that AnodizedParts is high in general, but is it feeling that it can somehow offset the design property.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The price is a little worrisome, but I feel a little disappointed that the locking method is Universal's L letter Wrench.
Well, I do not even think I'm dedicated to this size, but rather (Because it will manage somehow on that level) It might be good even without tools.
So if the price goes down a bit, that person ...
【Have you compared items?】
It is also Bolt which was cut into a classic one character which also has no change of the company.
Previously I was using that, but I chose the one with Designality as it was hard to tighten up and it was a big deal.
[Others]
This time, both Brake & Clutch Quantity : 2pc. I bought a set..
1 pc in one pack. There is only so, Quantity : Pair (for Left and Right) When using Quantity : 2pc. Set Please note that it will be necessary.
Although it feels somewhat expensive, when you install it, you will not mind convinced by the height of the texture.
View detail
I feel satisfied with the feeling of retrofitting
To CYGNUS X "Napoleu On Custom square mirror" When attached,
- I'm curious that roots are tight.
- I can see the other side from the gap of Cowl Parenthesis is bad
I thought that it was later installed.
Size is almost exactly, it fits naturally without a feeling of retrofitting.
The point where the far side can be seen from the gap of Cowl was almost 100%, but it was almost canceled.
It is a point that somewhat fixed is sweet and it feels that the price is expensive compared with the one.
However, we were generally satisfied as we were able to crush the initial discontent.
View detail
To Blind at the time of Mirror relocation
Expansion of Mirror Holder of the company in order to reduce the trouble of detaching Mirror when running Circuit.
I bought this Blind screw to fix Tank Bracket which became Free at that time.
GALE SPEED Master cylinder (Mirror Clamp) 'S Screw hole is M10 Opposite Thread Screw, so you can not make it Blind in a general Cap bolt, and you came to this Blind as a looking script.
- Material : I am glad that there are several color developments in Aluminum.
Choosing Silver is also a matter of making it too colorful.
It is directing a calm color..
- However, it seems that there is not much strength, and when it is concluded with -Driver, I licked a little bit.
Where the fastening strength is concerned.
- Regrettable that prices are expensive and fragile.
View detail
Tanax Napoleon On Mirror Cap
When I installed Tanax Napore OnBARENTT, I did not mind at first, but I started worrying about the part of Bolt being exposed, it was also a place to see it, it was a place that I could see, Rust prevention and appearance improvement I bought it with. I am self-satisfied, but I think that it would be better to purchase them together when purchasing Mirror.
View detail
Become an Off-road car
I installed this product because MirrorBoots which I had attached was broken.
I think that it is a design that fits well with the movable Mirror of an Off-road car.
View detail
It's nice but it's a little expensive
I bought it to Bolt for fixing Bracket of Brake fluidTank. M10xP1. It is saved because there is not much special Bolt of 25.
It is well made in color and well in shape, but Bolt 1 pc is ☆ 3 because this price feels a bit expensive at Bolt 1 pc.
View detail
It is a bit expensive
【What made you decide the purchase?】 It was just a good Large Kisano Screw to close Mirror's Screw hole.
【How was it actually used?】 Anodized It looks good with Aluminum processed.
【Was it difficult to install? (Hard parts case)】 Just a one-yen coin.
【Please tell me the point of installation and hang (in the case of Hard parts)】 I attached a Screw lock agent so as not to loosen by vibration.
[Is there anything I was disappointed about?] nothing special.
【Hope for Manufacturer - Please tell me if you have any improvement points] Screw 1pc. It is slightly higher than 500 yen.
【Have you compared items?】 I looked for 10 mm Screw at Home center, but since I only had a huge Bolt, I did it here.
[Others] There are various colors, you can choose as you like.
View detail
Mounting on APE
I used the NSR 50 OEM Master cylinder when making the APE disc, so I used it to close the Screw hole for mounting Mirror.
Although it is a product that is completely only looking, I think that it is good because the price is affordable and color is also abundant.
View detail