Reviews
I can't find a substitute.
Originally it would be something to fill in when you remove the Mirror, but I had a part of my kid's bike that I wanted to block off from the M10, so I bought it with the extra Point.
Because it cannot be said that it is indeed hand tightening, I thought to use Slotted screwdriver, but as far as the Screw head is concerned, Slotted screwdriver was expected to bite, so I took out 500 Yen coin from Wallet and fastened it with a comb.
It's almost a toy Material, but on the other hand, it's not sold in Screw stores, so I'm not sure if it's worth the price.
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Included Parts:Bolt is useless
The Bolt was a poorly made item that did not fit the dimensions.
Too long and too thin. The front cowl does not become stable at all when it is installed.
If you use it, SPE106NER/ROS of the same manufacturer is recommended.
View detail
good
I bought this to make it Mirror-less. The installation is very easy, anyone with tools can do it. The texture of the product was good, although there was no particular effect, etc. View detail
4.0
How it came about:to plug the screw holes in the Tanax Mirror that I purchased. It is rain and dirt prevention.
Installation and accuracy:Just insert it. Anyone can do it.
Quality and texture:Plastic is still cheap. However, I don't mind it because of its small surface area.
Shape:round.
Visibility:of course, but it doesn't increase visibility. It doesn't matter.
Cost performance:Waterproof and dustproof for 300.
Overall:I'm glad I bought it.
View detail
Installed on TOWN MATE 90
I put Opposite Thread Screw Adapter on my Yamaha motorcycle so that I can hide the joints and I changed the Mirror to a Napole On Trad mirror so that I can put Opposite Thread Screw Adapter on the Plating. I bought it because I thought it might rust as it had done so.
It hasn't rusted at all since it was installed and I highly recommend it.
NORMAL also had a cover like this one.
I wipe it down occasionally with RubberProtectant for care.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Well, in its own way.
Minus screws in general tend to deform after repeated mounting and dismounting.
Because of the Hexagonal Wrench holes, the risk of breakage is low if the proper tooling is used.
As far as visibility is concerned. "Parts to show. It's not so much a concern because it's not
View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
It's a little expensive. "Yes"
General Minus screw (Slots for Coins) Is
As long as the material is aluminum, it is easy to be deformed by repeated mounting and dismounting.
This is a Hexagonal Wrench hole, so no extra force is needed to put on and take off.
I think the Risk of damage is low.
View detail
For a little dress-up
I bought and installed it to fill the hole when I removed the Mirror of the SEROW225 in the race etc.
It's a little thing, but I think my car has become Fashionable! (Lol)
It's not a performance-enhancement thing, so it's all about self-gratification. (Lol)
View detail
well settled
I used this one because I changed the Mirror on my wr250x to a Trial mirror. At first I thought I would buy a suitable Bolt and paint it, but it was cheap and that was the deciding factor. The head is also thin and does not have a good sense of presence. View detail
Fits: BMW S1000 RR, BMW S1000 RR, BMW S1000 RR, BMW S1000 RR, BMW HP4 K42, BMW S1000 R K47, BMW S1000 R, BMW S1000 R, BMW S1000 RR K46, BMW S1000 RR HP4
Convenient for running meetings, etc.
You can use this to fill in the holes where Blinker, Mirror, Fender, etc. have been removed when making it a running or race expense. The holes are filled in to make it look more natural forme, which makes it look slightly better. The nice thing about this is that it also comes with a bag for storage. View detail
Required when running a circuit
When removing the Mirror in Circuit, I use it in place of the Bolt of OEM. In addition, because there is also the plan of Bar end mirror conversion, at that time I thought that a little fashionable one with Color, and chose this one. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Required for Bar end mirror changes
W800 Quantity:Pair (for Left and Right) Since I changed the Mirror of the Bar end mirror to the Bar end mirror, I bought it to plug the existing Mirror hole.
The color and size do not become unnatural and there is no problem, but I feel that tightening is necessary sometimes because I have not put in Washer and Spring washer. (It's been about 3 months and there's no looseness.)
It's not the usual Bolt, it's a hexagon, so it's not so obvious.
View detail
I'm not sure how to tighten it up
I bought it as a blindfold in Mirror hall
You can choose from a variety of colors, but I chose Silver to match the colors around it
The product itself isn't bad, but the way it was tightened up wasn't great for me personally
Hex wrenches are included, but they are not used as they should be, but rather to hook and tighten It will be a thing (Second photo.)
When you apply Torque, the hole will be a little bit wound and you will get BALI It is recommended to protect and tighten the tool tip with Masking tape
I like the look of it, so I'm happy with it for now
View detail
Casually, yet parenthesis-wise!
What made you decide to buy?
The KOSO:Mini3Digital air-fuel ratio meter is installed in the Bore up GROM, and it's a good idea to use it casually and securely Parenthesis to install well!
How was your experience with it?
Posh:Attached to Universal mirror holder M8 and Pitch 1.25 The actual application is the Mirror Hole Cover Cap The actual application is the Mirror Hole Cover Cap, but this time I used the Meter Bracket I don't know how long it can withstand vibration, etc Looks Parenthesis well done
Was the installation difficult?
It is installed by hooking the attached wrench for tightening Because the hook part of the Hole Cover Cap is shallow, no Browning is possible I thought it was the one to make the wrench for tightening penetrating before I purchased it But unlike Image, I couldn't tighten it firmly, because GROM has a lot of vibration I just hope it doesn't get loose and drop somewhere
【Please tell me the installation point and hang】
As mentioned earlier, the attached wrench for tightening is hooked and installed, but it is not Work carefully because working on Brown can damage the product you just purchased You should! I'm wondering if I should use a screw locker because the tightening torque is too lenient......in the future I would like to take measures while watching the state of
[Others]
The price is about 700. 1 Mirror Hole Cover Cap is included Because it is made in Japan, the quality and finish are good This time, I used the KOSO:Mini3Digital air-fuel ratio meter in a casual manner, and yet still have a lot of fun with it Parenthesis well purchased to install, but if you include the meter, it's quite It took a long time, but our parts are also pleased in the world of self-satisfaction Compared to the machine, Parts is also more affordable, so I can't stop being complacent
View detail
worth having
When running off-road on a TRAIL vehicle, etc. with the Mirror removed, the Mirror Put this product in the hall to keep the mud out
It's a great buy if you're going to ride off-road because you can get muddy without worrying about it
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000
AGRAS indeed!
As expected of AGRAS The product is good, but the price is also very good
The Mirror and Blinker will be gone, so please drive on public roads with security parts I moved Mirror to Bar End and Blinker to Position I moved Mirror to Bar End and Blinker to Position
View detail
Quality is good, but Cost is high
Bar end mirror installed
Can be fitted with OEM Bolts
OEM Bolt cover is Material:Since it's plastic, I think it would be more consistent in color tone if it was made by other Anodized products
Fitting and texture are fine, but the price seems a bit high
View detail
![Mirror Block Off [Mirror Blanking Plates]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0146/22772303_1_TS.jpg)
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M
It is a good product, although it has some design difficulties
Installed on YZF-R1 18
Parts is Material:I bought it because it is plastic, lightweight and I like the design
The bolts are included in the package, but they are not long enough to fit all 4 screws You must do this
I think that there is no large change in the Frame shape with the MODEL of one year ago I gave it 4 stars to be installed at my own risk because it doesn't have an 18 year MODEL written on it
View detail
I want it to come with the OffsetHolder
I bought this for the purpose of plugging the bolt holes in the company's OffsetHolder
This is a product I wish came with the Holder
The texture is brittle and plastic
View detail
It looks good, but the mounting method is disappointing
Because the Exhaust System was replaced and there was one extra bolt hole, I bought it to close it up I did
I use the L-shaped wrench to install it as described in the product information The Wrench can be used to remove the anodized parts around the tightening holes
It's hard to tell if you look at it from the front, but if you look into it, you'll see that it's been scraped off
I hope the Manufacturer will improve it
View detail