Reviews
When replacing the bar end mirror, please be sure to
Among the so-called reverse Screw type, I think this product has a good balance of texture and cost.
I have been using Spacer on the OEM Bolt since I replaced it with the bar end mirror, but I ordered it while I was ordering some things.
I am satisfied with the total because it looks neat and the color gives it Accent.
However, since the material is soft like aluminum, it is necessary to select the size of the driver carefully and dustcloth is essential.
View detail
![Mirror Block Off [Mirror Blanking Plates]](https://img.webike-cdn.net/catalogue/images/50737/22772302_1_TS.jpg)
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
R&G Mirror Blanks for Honda CBR1000RR 2016
Let's be honest, no one really likes the stock mirrors that come on most manufacturers these days, and for this reason a set of mirror blanking plates were purchased for the 2016 Honda CBR1000RR. This part was found using the reference on R&G website, this set does fit a few models of the CBR and Webike stocked them no problem. With some other parts shipped by EMS and arrived in 5 days. All arrived in perfect condition. The blanking plates are really cool, they have a nice R&G logo and are made from what looks like an aluminium metal. The finish on them is superb, the paint looks smooth and no sign of any flaws that I can see. The printed logo is crisp and clean. Comes with their own blots so no need to worry about losing the ones from the stock mirrors. Fitted really well and look pretty awesome. I already have some small bar end mirrors installed so can still see what is coming from behind. Overall, very pleased with the purchase. Keep it up Webike, thanks. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Not a Mirror hole, but...
The Z900RS has a base on the Frame for use with the Option Center Stand.
If the Center Stand is not attached, the Screw holes are visible and we would like to fill them for protection.
The hole size is M10×1.25, so you can use a hole-filling bolt for Mirror.
Lightweight Material:The trapezoidal bolt is made of aluminum and has a simple design, but is cool.
The Right Side simply attaches to the Screw hole.
The Left Side does not have Screw holes, but this time ButylTape was used.
Wrap the ButylTape around the bottom of the bolt and the neck in an O-ring shape and push it firmly into place.
In fact, the YOSHIMURA frame plug we are using now was originally installed with an O-ring, but it didn't feel quite right, so we removed the O-ring and pushed it in with a ButylTape. It is very firmly attached.
ButylTape is originally designed for waterproofing of lamps and mating surfaces, but it can be used for a variety of purposes if you have one pc.
View detail
water (esp. cool, fresh water, e.g. drinking water)
I bought this because I didn't want water or dust to get into the Mirror bolt when replacing OEM Mirror.
They blindfolded me nicely.
View detail
I changed it at One point.
I changed it at One point and became Accent and I like it. View detail
I tried to put it on, but...
[How is it used?
Use Mirror of another Manufacturer.
Because of the disappointing appearance of the cap bolt that came with it (Rust, scratches),
Purchased along with Cap bolt from Tanax Napoleon On.
Was the one you received as per Image?
Yes
How was your experience with it?
Tanax Bolt itself, with good plating quality,
Just by replacing Bolt without any caps.
I was satisfied with it, but I put it on since I purchased it at the time.
However, it is troublesome to remove the Mirror when adjusting the Mirror position,
I think the Demerit called "Large" might be more Large. Personally.
View detail
Due to the change in Mirror location
The Mirror hall was left open to allow water to accumulate, so it was plugged up.
Material is weak, so care should be taken when tightening it.
View detail
This is a must for off-road mirrors!
I bought this for the root dress-up when I replaced the Mirror on my CRF250RLY50 with a DRC161 off-road mirror.
This product is sure to increase the overall Off-road feel.
However, when using CRF250's 161 off-road mirror, it is necessary to pull the mirror up as far as possible while expanding the upper part because the mirror's foot part is too short to tighten the fixing bolt if it is installed as it is.
New Material:Since it is a Rubber product, it can be spread out quite well, but it is considered that sufficient care should be taken to avoid the possibility of it being cut if it is spread out too wide.
View detail
Detachable Cover Cap
I bought this to plug the mounting screw holes for the Back Mirror on my KLX125.
I often go to forest roads with KLX, not only open forest roads, but also many attack type forest roads, and sometimes I hit trees with Normal Back Mirror. Therefore, the Trial Mirror was installed under the handlebar. The mounting hole for the OEMB Back Mirror was left open. Well, it is OK to ignore it, but it is not so nice, so I covered the hole.
Functionally, a cheap and lightweight Plastic hole plug is sufficient. However, the Type, which is stuffed into a screw hole, is difficult to put on and take off. (It is easy to put it on by just pushing it in, but a little troublesome to take it off.) For on-road touring, the OEM Mirror is easier to use, so we will return to the OEM type. In such cases, the screw type is more convenient.
The disadvantage is that it is an aluminum cut-out, so it is naturally costly and expensive. You will pay about 1pc.500 yen just to plug the hole. (Plastic hole plugs are lightweight and much cheaper.)
I would recommend it to those who are concerned about the screw holes that removed OEMMirror and who are concerned about looking good or who repeatedly install and remove the OEMMirror.
Inexpensive, lightweight Material if you just want to plug the holes:Plastic is good.
View detail
Fits: DUCATI PANIGALE 1199 R, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299
Mirror-less
Installed in conjunction with Mirror-less.
The appearance has been Refreshing.
View detail
I like it.
It's a bit expensive, but it makes it look Refreshing. View detail
Installation accuracy is excellent, but…
To install, simply remove the Mirror and tighten the two screws.
Installation accuracy is quintessential Rai TEC.
But the price is also a quintessential Lai TEC lol.
I think the cost is a little low.
View detail
Genuine Lightech Mirror Blanks for R1M
These were a needed part for an R1M 2020 model after removing the OEM mirrors and replacing with aftermarket ones. This was a preference for a customer of mine who did not like the stock ones on their bike when they purchased it. The correct part number was found simply by visiting Lightech's website and searching for the manufacturer, model and year. Super easy. For how much the difference is between Webike and my UK stockist, it was a no brainer. I think Webike are stocking a lot of the brands that people actually want, especially Lightech. I always have other items in my basket and adding these to the order made the cost of shipping that little bit more bareable. I used EMS fast service which virtually guarantees delivery within a week every time I have used it. This was no exception and everything arrived in 5 days. Webike are one of only a couple of my go to companies for motorcycle parts that take a good amount of care in packaging the orders you place. Even though there were some strange and light parts in my order along with some heavier ones, they packed out the box with additional packing to stop much movement in transit, a simple thing but as I said, not many do this. They also seal the outer box so nothing can get in or out during transit. All arrived in perfect condition and even some of the gaskets which you kind of expect to take a hit, was 100% perfect. These mirror blanks are a really nice addition to a bike of this year, on a 2020 bike you do not want something that looks tacky and cheap. The CNC machining is spotless and the anodising is perfect with no light or dark spots. All extremely well done, the curves are gorgeous, the lines are super clean and along witht he stainless fittings they look absolutely stunning. Generally, I do not care much for OEM mirrors myself, not really sure why a lot of manufacturers don't design better ones but hey. Fitted really easily but take your time. The end result is fantastic. Thank you Webike for the great services you provide. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Bar end mirror accompaniment
Bar end mirrors were installed to cover the screw holes.
It is just a Screw, so there is nothing special about it, but I chose this one because it has a different shape from the other ones, while most of them have a Minus shape.
View detail
Mirror Cap
I bought it for some reason, but the texture was there and the price was Reasonable. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R125
If you can afford it, buy it.
I bought it because I missed the part where I removed Mirror from the Circuit run.
It should take less than 10 minutes to remove the Mirror and install it.
Anyone with tools can do it.
Bolt is included, but Nut uses the original.
It is a little expensive. If you are dexterous, you may be able to make it yourself.
View detail
Soft.
If bar end mirror is used
It is better to install the Handlebar around the
Normal Thread Screw, Opposite Thread Screw
Note that there are
The material is soft, so if you tighten it too tightly
There is a high probability that Mt. Screw will crumple when it is removed.
Torque is quite light and sufficient.
View detail
nice little accessory
My YAMAHA XMAX300 has refitted the front rearview mirror. The original screw hole needs a cap. I searched for a long time and finally let me see it. There is no difficulty in the installation process. Just unscrew the original mirror screw. Direct installation, I prefer the black appearance, low-key and chic, it matches the car very well, and its material will not rust, which makes me very satisfied ------------ -------------------------------------------- My Yamaha XMAX300 modified the front -view mirror. The original screw hole needs to install a hat. I found it for a long time and finally let me see it. There is no difficulty during the installation process. Installed directly, I prefer the black appearance, low -key and uniquely matched the car, and its material will not rust, which makes me very satisfied Powered by Google Translator View detail
![Mirror Blanking Plates, Mirror Blocking Off [Mirror Blanking Plates]](https://img.webike-cdn.net/catalogue/images/41365/RD_ZZ_pict_1415874678528824_web_TS.jpg)
Fits: YAMAHA R1, YAMAHA R6
Not fit for yzfr6 08
It says "r6 06-13" but it didn't fit at all. Why is that? View detail
Buy the Malossi guy.
I made sure I got it right before I bought it.
The number of entries is the Quantity:2pc. Set" Is this after having the supplier confirm it?
When I opened the box, I found one, and only one side of the box.
View detail