Reviews
Attacks from Pad.
Damage to the disc because I used Red Pad up to the seat Gold...
2.Since the ADDRESS 110 had been used for 60,000 km, the difference between the surface that hits and the surface that does not hit became a concern, so we replaced it.
The price was reasonable and the installation was done without any problems.
The pads were replaced at the same time as the brembo pads, so they were not in full effect during the normalizing phase.
About a month has passed and I am not sure if Pad is better or disc is better, but it feels like a good disc.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA LEAD110 EX, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI LETS4 Basket, SUZUKI LETS5, SUZUKI LETS5G, HONDA SUPER CUB110
50Meter
Running 50Meter and light bulb out. View detail
THE carb kit
An incredible value for money and really complete, everything is there. Even the O-rings for the tees between the carburettor bodies are provided. The membranes of the bushels are changed without problem which avoids having to buy them complete. -------------------------------------------------- -------- An incredible and really complete value for money, all is there. Even the toric seals of the tees between the carburetor bodies are provided. The membranes of the bushels change without problem which avoids having to buy them complete. Powered by Google Translator View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Increase mileage
My motorcycle is YAMAHA NMAX155. The fuel tank design of this motorcycle is only 6.6L. It is a bit small for me who lives in the suburbs. I often need to refuel, so I bought this ATop on webike Large-capacity fuel tank, its capacity has been increased to 9L, so that the cruising range can reach more than 300KM, and the original package is installed without damage. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. This motorcycle's fuel tank design is only 6.6L. For me living in the suburbs of the city, I often need to refuel in areas. In large -capacity fuel tanks, its capacity increases to 9L, so that the range can reach more than 300km, and the original is not damaged. Powered by Google Translator View detail
convenient stand
My motorcycle is YAMAHA XMAX300. There is no place to install the extended recorder and mobile phone holder on this car, and the bundled installation is not very stable, so I bought this ATOP extension holder on webike. This holder is installed on the windshield. It will not block the dashboard, nor will it take up the handlebars. There are many installation positions on it to easily install mobile phone holders and recorders, which is very convenient. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. This bike is not installed with the position of the expansion recorder and mobile phone bracket. The bundle installation is not stable, so I buy this ATOP expansion bracket on Webike. This stand is installed in the windshield position. It will not block the dashboard, nor does it take up the handbars. There are many installation locations that can be convenient to install the mobile phone bracket and recorder, which is very convenient. Powered by Google Translator View detail
MC19CarburetorOHKit
I bought my MC19 used, so I don't have the same feeling as when I bought it new, but I think it's probably back to normal because the Idling is stable and it blows up well. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF, HONDA X4, HONDA CRF1100L Africa Twin, HONDA CBR1100XX, HONDA X11, HONDA CB1000R, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA VTR1000F, HONDA VTR1000SP-I, HONDA VTR1000SP-II, HONDA CB1000SF, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR929RR
Processing required
Processing is required to make it fit.
Without Tandem, as a decoration, it may be good.
View detail
Fits: YAMAHA CELLOW 250, YAMAHA XT250, YAMAHA XT250S, YAMAHA Tricker 250, YAMAHA XG250, YAMAHA XG250S
For 2014 XG250 TRICKERS
Purchased for a 2014 XG250 TRICKER, chose this one due to the high OEM price. No modification was required and it was installed without modification. It works great. View detail
Excellent clear glass
"About quality and texture
Excellent quality of casting plastic glasses, corrugation as on the original, the diffuser also works as it should, three glasses are installed in standard latches and grooves, the glasses also fit together correctly, without gaps, which I was surprised, since this is not an original and the manufacturer is not Japan
About the feeling of use
Great experience and great looks, easy installation, comes with 3 taillight glass and license plate light glass, all in very good tolerances, workmanship is high even though made in China
On the attached photo you can see how this set looks live
Products to buy together
It is required to buy a red lamp as the glass is transparent and the white light inside is unacceptable in some states
Difficulty of installation
Easy installation to replace the original, only need a Phillips screwdriver to unscrew the two screws
Cost performance and comparison with other products
Very low price, good workmanship and fit can compete with more famous manufacturers
About shipping and packaging
Simple packaging in a bag, as well as additional packaging of Webike before shipping
Any concerns, cautions, or advice when purchasing
Before buying, find the red brake light in advance
-------------------------------------------------- -------- About Quality and Texture Excellent quality of casting plastic glasses, corrugation as on the original, the diffuser also works as it should, three glasses are installed in standard latches and grooves, also the glasses are joined correctly, without gaps, which I was surprised, since this is not the original and the manufacturer is not Japan About the Feeling of Use Excellent impressions and a great appearance, light installation, three glasses for the rear light and the glass backlight are delivered in the kit , all in very good tolerances, the accuracy of manufacture is high, although it is made in China In the attached photo you can see how this kit looks live Products to Buy Together It is required to buy a red lamp since the glass is transparent and white light inside is unacceptable in some states Difficulty of Installation Light installation in return original, you will need only a cross screwdriver for unscrewing two scr ews COST Performance and Comparison with Other Products Very low price, good quality manufacturing and fitting may well compete with more eminent manufacturers ABOUT SHIPPing and PACKAGING Simple packaging in the package, as well as webike dopakovka before sending Any Concerns, Countions, Or Advice When Purchacing Before buying in advance, find the red lamp of the stop signal Powered by Google Translator"
View detail
Considering the cost performance, I have no complaints.
Hurdle is too expensive to purchase OEM.
I bought it for its cost performance, but it's just over 200 kilometers old.
No problem at all!
View detail
Replaced because it was cracked.
I bought it because it was inexpensive, and although it has some gapping, it works normally, which is to be expected from an inexpensive Other Brand Product. It is just my personal opinion, but the engine runs normally and it doesn't bother me when I run. View detail
To Restore
It works fine, but there is a slight gap and no air suction. View detail
Installation itself was difficult; Shield gave up.
The installation itself is extremely difficult. The Image is a flat steel plate that is forcibly tightened to the originally curved front with screws. Even if I managed to install it, I gave up because the screw holes in the Shield do not fit and the load on the part is even greater, and it could be destroyed. I will return to OEM as soon as possible. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z650, KAWASAKI Z800, KAWASAKI Z1000
Side Stand・Extension
Installed on Z900RS.
Tighten Screw up or down, Quantity:Pair (for Left and Right) There is rattling in the
The top and bottom directions are resolved by applying 0.75mm thick Double-sided Tape.
Quantity:Pair (for Left and Right) For the direction, a 2mm-thick plastic plate was cut and inserted into the gap to stop it from rattling.
For those who can handle the above level or do not mind rattling.
View detail
I couldn't fit it on my Grom JC92.
Thank you for all your help.
Unfortunately, this time, the Size did not fit delicately and could not be installed.
It may be an individual difference in the product, but it is unfortunate.
Therefore, the rating must be the lowest.
View detail
Size-wise, it doesn't fit a bit.
I use a Bolt with Washer to fix it because it is a three-point bolt but I can't hit one of the bolts. View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker 125, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI 250TR
Foldable and at this price! Highly recommended!
[How is it used?
It is always used when holding Lever. It is a place that is quite visible when driving, so it is full of custom feeling. It is sure to stand out.
Was the one you received as per Image?
Green Light color is also very good. Good texture and just like the Image.
Was the installation difficult?
Installation is easy if you have the right tools.
How was your experience with it?
The length of the lever is adjustable, which is great because you can adjust it to your preference, and because it is foldable, there is less risk of the lever breaking in the event of a fall (increasing the chance of getting back home on your own).
[Included Parts:were they on?
Lever set only
[Was there anything that disappointed you?
None
Other items that would be helpful
Point and hang of installation
Just remove and replace the OEMLever; Grease would be nice to have.
[With or without Instruction Manual
No Instruction Manual, but it's just to replace it, so it's not really necessary.
View detail
nonconforming
Number of teeth on the OEM14-44, Initial Model of VTZ250 (87th model) However, the groove of the DriveSprocket seems to be slightly different and it does not fit and is unusable.
Probably VTZ250J (1988 and after) Note that the VTZ250Initial Model is also listed as compatible with the VTZ250.
View detail
not worth discussing at all
Although the total length of the wire itself is the same, the holder installation position (wire adjustment position) is completely different and cannot be installed.
The NC35 is included in the list of compatible vehicles, but it is completely useless.
View detail
Fits: SUZUKI DR200 Jebel 200, SUZUKI VAnVan200 VAnVan200, SUZUKI DR200 Jebel 200, SUZUKI VAnVan200 VAnVan200
Perfection!!!
I received it recently, and about to disassemble the bike pretty soon. But the quality is pretty nice. Hope i can start repairing soon View detail