Reviews
Best sound quality
The color and sound quality of the Exhaust pipe is great, I have never seen anyone with one on an MT09 and it really differentiates it. The sound is so good that it makes driving more enjoyable. The installation is difficult to access the bolt of the exhaust pipe, the wrench and the pipe interfere with each other, and the 3-2-1 connection is not aligned, so it is necessary to adjust it many times from the state of temporary tightening, and it is hard if the motorcycle cannot lift up and down. Also, the Silencer's mounting spacer is divided by taper processing, and it is very difficult for amateur maintenance because of the large nut to be tightened through the bolt, which is very strange and makes me lose my mind. View detail
The polished stainless steel finish looks awesome on the bike
About quality and texture, I can confirm that the quality is great and that the material used is stainless steel for the muffler and stainless steel for the pipe. About the feeling of use, The polished stainless steel finish looks awesome on the bike and the noise level of the exhaust is perfect for me at high RPM, generating an enjoyable noise level. Products to buy together, Some more SP Takegawa parts to complement the stainless steel exhaust system would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the rear muffler mount to the front flange studs lined up perfectly. Cost performance and comparison with other products, The pricing of the product is great. You receive an exhaust system that is made using high quality materials and has a high quality surface finish. There are plenty of stainless steel mufflers to choose from but SP Takegawa does it right all the time. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Coolest pipe for my CB750
This was my first purchase from e Webike and I'm very very happy. After searching and searching for a new exhaust for my CB750 restoration project, I came across this amazing company. One problem was that the exhaust system I chose wasn't in stock ☹️. Anyway I kept checking back and then...Tadaaa... In stock, so I ordered right there and then. Admittedly I was a little concerned about shipping cost and import duties to UK, although I need not have as there was an offer at the time, which saved me a serious amount of cash. Anyway, order done and paid for, you can only imagine my surprise/shock/joy as when about a week later, the item is at my door!! On opening the box, I was found the exhaust in perfect condition, with all pieces needed to fit it. An hour or so later, the lovely exhaust fitted with no issues and the sound...Absolutely perfect, much much nicer and deeper than expected, even my wife was amazed... So there it is, my review of my first purchase from Webike, absolutely amazing service and an amazing exhaust system. View detail
Solid change on a small budget
The volume is a little louder and the weight is lighter.
The volume is not so loud that it is deafening, just a little bit louder, but it is pleasantly resonant.
The exit is almost the same, but there seems to be an increase in power throughout the entire area due to the overall thicker Pipe.
The power of the motorcycle is only enough to run at full throttle on the Motocross course, so the horsepower will not change much, but everyone will feel the change.
It is very good from the start, or it seems to accelerate as much as I open the door, even though it is slow.
The installation is also very precise, so anyone can easily work with it.
I think it is a good product because it is inexpensive and I could feel the change.
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
Exhaust note is larger than expected.
I purchased this product based on the information on YouTube, etc., with design first, and selected the Stainless Steel Type because it has no band on the silencer part and is refreshing. However, the exhaust sound is a bit louder than expected, and it bothers me a little during warm-up operation. The acceleration is very fast and it goes into 6th gear in no time. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY S, HONDA CRF250L, HONDA CRF250L S
Convincing YOSHIMURA
I installed YOSHIMURA for the first time. The sound quality at low rpm is great, and when the engine is turned up, the sound becomes gentler, so I can warm up the engine without worrying about my neighbors. The exhaust gasket and silencer side gasket are not included. Don't forget to buy them. View detail
Sticker on Silencer
The Silencer Sticker had been removed and lost when I saw it after the first break-in period of about 30 km. It may have been something to be removed from the beginning. View detail
Fits: YAMAHA XJR1300
xjr1300YOSHIMURAFull Exhaust System
Japanese Vehicle Inspection Correspondence, but the Idling is quite loud. It will be a little bit better once the warm-up process is over, but the bass sound can be heard all the way inside the house. The previous exhaust system was Beams Slip-on Silencer, but the volume at idling is obviously higher. By the way, Beams has 92dB at Idling and YOSHIMURA has 91dB, but I and my friend thought that YOSHIMURA is definitely louder than Beams. Also, I'm a little disappointed with the sound of the gurgling sound when idling....
When I started to drive, I could hear the good sound of Mr. YOSHIMURA. The exhaust pipe has been burned up nicely and I'm satisfied with the sound!
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
The sound quality allows you to enjoy a single-cylinder feel!
The replacement gave the exhaust a crisp, single-cylinder-like sound. View detail
Fits: HONDA REBEL1100, HONDA REBEL1100, HONDA REBEL1100T, HONDA REBEL1100T
Long-established businesses do not disappoint.
The appeal of this product lies in the balance between design and performance/sound quality.
The exhaust sound changed to something else immediately after installation and at the end of the 50 km break-in period.
The powerful pulse of the TWIN was pleasantly resonant, and above 4000 rpm it was truly a roar, a numbing experience.
The low-mid range is definitely torqued up, but there is also a slight increase in vibration.
Installation is not too difficult if you have the right tools and the right knowledge, but the most difficult point is to remove the O2 Sensor Connector.
Two copies of the Exhaust Gas Certificate for vehicle inspection are included, nice attention to detail.
The price was a bit steep, but the value and enjoyment was as expected.
View detail
Fits: YAMAHA VIRAGO125, YAMAHA VIRAGO250(XV250)
best qualified and quality exhaust ever made
best qualified and quality exhaust ever made ... easy to instal ... the sound is wonderful ... shipping is fast and the prodect mutch the description View detail
Full Titaniumium Down Exhaust System
We chose this Down Type Exhaust System for the Main for street driving.
I had a hard time removing the side cover when removing the exhaust system. Other than that, there were no problems.
I am satisfied with the Large size because it is a full titanium muffler of Down type, while the Up type is the mainstream exhaust system. The sound was dry and low and quieter than I expected (personal opinion).
I have no problem with it because it is street driving spec. but Under Guard will not be able to install it.
View detail
Yoshimura cyclone
I wanted SP Tadao's Exhaust System, but there was no 23-year MODEL, so I decided to go with Yoshimura cyclone. View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
V-ST SX Good to match the color of the car
I purchased R-77SCYCLONE SMC? out of the 6 types released for VST SX.
I started the car right after changing it, and my friend laughed at me because the volume was so different from the OEM! (^^;) Urasaito than expected (Japanese Government Approved Exhaust System, in case you are wondering)
The sense of power seemed to have increased in almost all areas. When I was driving in 5th or 6th gear on a motorway and following the flow of traffic, when I accelerated at the start of the overtaking lane that suddenly appeared, I felt the power of the car was increased in almost all areas of the road.
Normally I would have dropped to 4th gear and pulled like a 250cc driver, but it was so powerful that I was able to accelerate the same way in 5th gear. ・ If you drop 4th gear, it extends more. (^-^)
I drive on public roads at a leisurely pace, so if the 250cc runs this well, it is perfect.
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
DL1000 V-STROM 250SX became 300SX lol
I immediately installed the newly released YOSHIMURA tubes. The acceleration is sharp and different. Torque UP in all range of low RPM and high RPM. The sound quality is very powerful for a serious YOSHIMURA. Personally, I am satisfied. The sound quality is quite powerful for a serious YOSHIMURA brand. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
Disappointed with the roughness of the finish.
[How is it used?
I switched my car to a Z900RS and the NORMAL sound was not bad, but
Purchased because the sound quality was a little different from my taste and I wanted to change the appearance and reduce the weight.
The following impressions are in comparison with the SC-PROJECT full titanium exhaust that was installed on the previous Z900 (unmarked).
So it is very dry.
Was the one you received as per Image?
The finish was worse than expected.
All of the pipes have scratches from the manufacturing process, and all of the exhaust pipes have weld marks.
It looks as if it is not a Pipe, but a plate material that has been rounded and welded.
The surface of the bending part is decorated with wrinkles.
Roughened surface like sharkskin can be seen throughout the entire surface (especially on Tail Pipe). (Tail Pipe is especially bad.)
Material:I also felt it was surprisingly heavy for Titanium.
The SC-PROJECT product was surprisingly light, with excellent finish and precision.
I assume the lightness is due to the use of thinner-walled Pipe than this product.
Naturally, the thinner the material, the higher the technology required for bending and welding.
Was the installation difficult?
The joint with the Tail Pipe also went in without any problem when combined with the same K-fac Bullet Silencer.
Aluminum's split flange seems easy to install, but in reality, it is not easy to install on the Stud.
It is difficult to do because of the "Rose" effect.
The installation of the assembly was easy, with no particular misalignment.
Clearance with the lower part of the Engine is quite low, making it difficult to set an extreme Pushing Up Style.
The Bracket that fixes the Wiring of the OEM's Lambda sensor was removed because it hit the assembly area.
The Lambda sensor mounting part is for the Z900RS, but for some reason, the position is on the opposite (back) side of the OEM.
It looks hard to do when removing it because it is about 10 cm away.
Since there are only two fixation points, one at the exhaust flange and the other at the silencer, it can be used for a long period of time.
Durability is a little uncertain.
How was your experience with it?
The thick exhaust pipe that looks like a hand bent, and the silencer angle of the pusher is also good for Parenthesis.
Material also gets a burnt color if it runs.:The good thing about TitaniumExhaust pipe.
The sound may depend on the Silencer combined, but since the catalyst and SaPig equalizer are eliminated, the sound is basically bombastic.
The sound quality is muddy from the Idling, with a rough, dusky sound rather than a clear, pleasant sound.
Exhaust pipes are just bundled together and not etc. length, which may cause turbidity due to exhaust interference, etc.
Frankly, I do not prefer it compared to the pleasant sound of SC-PROJECT.
Combined with Bullet Silencer but with Inner baffle
It seems that the exhaust resistance is quite low and I don't feel that the low speed Torque is extremely low, nor is the AfterFire at all.
It feels like the performance is down because it feels like it is stuck on top of the bomb.
I would like to eventually try it withwithout Baffle and other Silencer to see how the volume, sound quality, and performance changes.
If you think that you can get a Titanium Full Exhaust System at a relatively low price if you choose a cheap Silencer, you can get a Titanium Full Exhaust System at a relatively low price.
I would recommend it if you think it's cosmetic but don't care about the rest as long as it looks good.
[Included Parts:were they on?
Instruction Manual、Material:Includes AluminumFlange and Spring. (Also available for SilencerSpring)
[Was there anything that disappointed you?
As already mentioned, the roughness of the finish, weight, and sound quality are all disappointing.
Perhaps it was made by an apprentice? The finish makes you think
I must say that it is a bit disappointing to ship this Level in a product that costs more than 100,000.
According to the Instruction Manual, it is not returnable once the Vinyl containing the respective Parts is broken.
It is better to Check well before opening the package.
What does it mean that the initial four-month wait was suddenly delivered the following month?
Would it be too much to suspect that a B-grade shipment was made...
Other items that would be helpful
Items to buy together:.
This product is a PipeSingle Body, so a silencer, silencer fixing bracket, etc. are required separately.
View detail
Fits: KAWASAKI W800, KAWASAKI W650
There is a difference from the product image!
Exhaust System installation plate is different from the picture lol
Install with a generous heart.
Ant distortion
The sound quality is very good.
View detail
Full Exhaust System with Japanese Vehicle Inspection Correspondence
[How is it used?
I use it in Touring Main
Was the one you received as per Image?
It is exactly as it looks in the picture, but it was cooler than what I had imaged!
Was the installation difficult?
Exhaust pipe and silencer were difficult to join and leaked without modification.
I contacted Manufacturer and they said that Joint gasket was not necessary, but the exhaust leakage did not stop, so I used liquid gasket!
I think it is a matter of the angle of installation etc., but it did not work as I expected.
How was your experience with it?
The sound is larger than NORMAL, but it is not explosive by any means.
I feel as if the airflow has been lightened.
Exhaust System weighs much less than NORMAL!
[Included Parts:were they on?
There
[Was there anything that disappointed you?
None at all
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The styling of the muffler was what sold me on the product
About quality and texture, I can confirm that the quality is great and that the material used is stainless steel for the pipe and stainless steel for the muffler, all surfaces come with a polished finish. About the feeling of use, The styling of the muffler was what sold me on the product and I am not disappointed with the exhaust sound either. A positive experience from making the purchase thru to using it on the bike. Products to buy together, This exhaust has also improved the appearance of the bike so a fender eliminator to allow the removal of the next ugly part would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the muffler mount to the exhaust port mount lined up perfectly. Cost performance and comparison with other products, The pricing of the product was great. You receive a full exhaust system that is made using high quality materials and has high quality surface finishes. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110
I chose the store and products based on their reliability.
Cool
It's like this.
Sound is good, but the sound is a little too large.
I am satisfied with the overall feeling of power up.
View detail