Reviews
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GSX400
Since it was required because of muffler exchange, it purchased. Although structure of appearance was rude touch, it was satisfactory for the engine performance.
Since it was required because of muffler exchange, it purchased.
Although structure of appearance was rude touch, it was satisfactory for the engine performance.
View detail
Although a design is good, the stay by the side of a clutch cannot perform air-bleeding in a master side, after fixing. (A ZZR1100D normal handle, tank level fixation) If it carries out by force, a crack will go into a master and stay. Moreover, w
Although a design is good, the stay by the side of a clutch cannot perform air-bleeding in a master side, after fixing.
(A ZZR1100D normal handle, tank level fixation) If it carries out by force, a crack will go into a master and stay.
Moreover, while the surface mesh is touching the attached hose, it will become white.
He exchanged for the brembo pure rubber tube and the hose clamp.
Although it was interference at the time of operation, also when a full stare was carried out, by our ZZR1100D normal handle, it did not interfere in a cowl.
If step is kept also with a brake clutch although it is cheap, he is smart and there is a hand of stay its original work, and isn't there such any selection, either?
View detail
Used the rear brake in many cases in order to maintain a balance, since maximum braking force was hardly demonstrated, thought that it was not needed in a mesh hose, but. While being recommended to a friend, when it purchased and stuck, power was demo
Used the rear brake in many cases in order to maintain a balance, since maximum braking force was hardly demonstrated, thought that it was not needed in a mesh hose, but.
While being recommended to a friend, when it purchased and stuck, power was demonstrated also to braking just before Locke-making it easy to control at the feel made into the snap.
The strong point Appearance is also race ish demerit as it is a mesh to the feel and control nature, and a rear brake whatever it may call it. Price.
It cannot be denied that a priority falls from necessity and a price.
Comparison with the product of the other company Too, although a mesh hose is either an earls or a goodridge and it is just going to waver, I recommend you a goodridge positively.
In respect of a design, by the showy earls and stainless of anodized aluminum, since it is each person's liking, in the chic goodridge of touch, which cannot declare that it is good, but I think that it is a goodridge positively if it says by the reinforcement in respect of practical use.
View detail
As compared with normal, the operation feeling became very good. It became brave too much and a brake switch did not react (it can adjust by play of a lever). Not only a hose but the banjo circumference is painted by Black, and since metal fitting
As compared with normal, the operation feeling became very good.
It became brave too much and a brake switch did not react (it can adjust by play of a lever).
Not only a hose but the banjo circumference is painted by Black, and since metal fittings (?) are small, the presence of appearance is not worrisome few.
individually, from the goods (stainless) of the swage line, appearance, texture, and an operation feeling were likable (both -- use -- experienced).
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
When a handle was made into a separate handle, the pure top bridge was equipped. Although at least this Bar had feeling of a dress-up up of enough but, when it was itself, this Bar was equipped with the analog clock using the switch and handle clamp o
When a handle was made into a separate handle, the pure top bridge was equipped.
Although at least this Bar had feeling of a dress-up up of enough but, when it was itself, this Bar was equipped with the analog clock using the switch and handle clamp of a hazard lamp.
Since the space equipped with these will be lost if a separate handle is used, it was a case of killing two birds with one stone! Very much satisfied.
View detail
Fits: HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F, HONDA CBR400F, HONDA CBR150R, HONDA CBR125, HONDA CBF600, HONDA CB350, HONDA CB250RS, SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80
ZOOMER does not have a fault called this, although it is attachment. It is thick and easy to have, and since the tribal part is the sponge ?, it does not so much slide. Since neither discoloration nor degradation can see although it attaches and a
ZOOMER does not have a fault called this, although it is attachment.
It is thick and easy to have, and since the tribal part is the sponge ?, it does not so much slide.
Since neither discoloration nor degradation can see although it attaches and a number of years pass, are they good goods to a price?
View detail
Fits: その他 , HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel300
In the grip for 1 inches, they are budget prices. A classic atmosphere is also Good!
In the grip for 1 inches, they are budget prices.
A classic atmosphere is also Good!
View detail
This product has the necessity of buying it by the shaft and a set. Since it will end if a handle is changed and the die length of a shaft will be changed, in the direction changed frequently, it may be virtue. Although I think that the experience
This product has the necessity of buying it by the shaft and a set.
Since it will end if a handle is changed and the die length of a shaft will be changed, in the direction changed frequently, it may be virtue.
Although I think that the experienced direction is known, it can equip without damaging a handle, since it is the touch which is inserted with a clip unlike other manufacturers.
Since there is no fault in particular, they are goods which can carry out a recommend.
View detail
They are the optimal goods for the direction of the pure handle of MF08. Isn't the size suitable for a pure handle only this product? Since it is required to equip with a juice (I think that it is tolerance although it is delicately long) holder etc.
They are the optimal goods for the direction of the pure handle of MF08.
Isn't the size suitable for a pure handle only this product? Since it is required to equip with a juice (I think that it is tolerance although it is delicately long) holder etc. and color is also abundant, it is one article of a recommend.
View detail
Since having been attached to XLR from the first became worn-out, it is exchange. Although that [ what ] did not change other than the bar pad [ itself ] design, either, since the ZETA hand guard etc. were used with much trouble, ZETA was used. Es
Since having been attached to XLR from the first became worn-out, it is exchange.
Although that [ what ] did not change other than the bar pad [ itself ] design, either, since the ZETA hand guard etc. were used with much trouble, ZETA was used.
Especially where thinks that it is not necessarily good.
Probably, you may choose by a design.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
It is always putting in under the sheet for the emergencies at the time of touring. Although he does not want to encounter the opportunity for this to play an active part ...
It is always putting in under the sheet for the emergencies at the time of touring.
Although he does not want to encounter the opportunity for this to play an active part ...
View detail
Most separates with a sticker, and since this is only a character although it will be severe, the point of impact (hand guard) is good. Moreover, a guard portion is also large and easy-to-use. If it is about the same price, this one is recommended
Most separates with a sticker, and since this is only a character although it will be severe, the point of impact (hand guard) is good.
Moreover, a guard portion is also large and easy-to-use.
If it is about the same price, this one is recommended positively.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200, YAMAHA TW200
Since the notch of the pure step seemed to be bad in shoes, it changed. An operation feeling in particular does not change. It seems to be good for shoes. Since appearance is touch that only a step floats very well, it may say those who want t
Since the notch of the pure step seemed to be bad in shoes, it changed.
An operation feeling in particular does not change.
It seems to be good for shoes.
Since appearance is touch that only a step floats very well, it may say those who want to take out the admiration carried out custom.
View detail
Although it is required goods which there may be this or may not be, if it is, they will be very convenient goods. If attachment is also easy and ? fault is somewhat expensive in about 15 minutes, is it only the failure at the time of start to cancel?
Although it is required goods which there may be this or may not be, if it is, they will be very convenient goods.
If attachment is also easy and ? fault is somewhat expensive in about 15 minutes, is it only the failure at the time of start to cancel?
I think that it does not become obstructive by a pure vehicle, either, although a long wheel base and the direction which carried out the lowdown are necessaries.
View detail
It is better to consider this by the seat frame for lowdowns, and a set. If there is this [ no ], a load etc. cannot be placed under a sheet. If it merely rains, it is meaningless, and since there is a possibility that it may be caught since the f
It is better to consider this by the seat frame for lowdowns, and a set.
If there is this [ no ], a load etc. cannot be placed under a sheet.
If it merely rains, it is meaningless, and since there is a possibility that it may be caught since the fixed method is moreover a binding band, or a crack may be attached, I consider that it is better to change into another thing.
Except it, since there is nothing that it is visible comparatively shapely and a load is likely to fall, it is a recommend.
View detail
Since it did not care for the reflector of normal attached to SR400, it exchanged for this. The design which is not asserted so much unlike a reflector authentic positive in SR400 is O. Moreover, since it will reflect firmly if night comes even if
Since it did not care for the reflector of normal attached to SR400, it exchanged for this.
The design which is not asserted so much unlike a reflector authentic positive in SR400 is O.
Moreover, since it will reflect firmly if night comes even if small, it is safe.
Since it is in the state where the reflector part has stopped with one screw about the dissatisfaction point, it separates in vibration or they are (it loosens) and the point of inclining.
This must make a screw two or must use double-stick tape and an adhesive bond.
I think that I also want Mr. Manufacturer to improve.
View detail
Since A755 of GIVI which was being put in until now had broken in the fall, the VARIO touring naked of MRA was attached this time. Since variable flaps are attached on the screen as a feature, the windscreen effect can be adjusted. Former GIVI tho
Since A755 of GIVI which was being put in until now had broken in the fall, the VARIO touring naked of MRA was attached this time.
Since variable flaps are attached on the screen as a feature, the windscreen effect can be adjusted.
Former GIVI thought that variable flaps adjusted the hit condition of a wind since a wind did not hit conversely but it felt hot summer, although the windscreen effect was good.
When it was in the state which stood the flap when it actually equipped and ran, there was the windscreen effect of the same about as GIVI, since a wind came to have hit upwards from a breast when the flap was put to sleep, it aimed, and there was an effect of a passage.
Moreover, since the stuck motorcycle is seldom seen, in the direction where the thing different from people is considered to be good, I think that it is recommended.
View detail
Although it is adoption of only perfect appearance, by a cable tie, although attached simply, the circumference of a front becomes tight, and it is visible to it. Although it seems that 750 had setting out for a fixed period even when it was pure, it
Although it is adoption of only perfect appearance, by a cable tie, although attached simply, the circumference of a front becomes tight, and it is visible to it.
Although it seems that 750 had setting out for a fixed period even when it was pure, it is adopted only as 400 and 1100 now.
Although Mr. Manufacturer's idea may not be suited ... I think that they are the items which were considerably upgraded by easy wearing and about which it is made to care.
View detail
although he thought that he would make it immersed in carbon and being purchased -- structure of other A-TECH products -- it was different in why and processing etc. were quite required. Although a pure tail lamp attachment screw is 5 mm, four places
although he thought that he would make it immersed in carbon and being purchased -- structure of other A-TECH products -- it was different in why and processing etc. were quite required.
Although a pure tail lamp attachment screw is 5 mm, four places 1) 5 mm of upper parts,
Why or the back does not enter about 5 cm at the time of main part wearing considered to be 2 usual bolt-on [ which was spent for small 1 hour by the time it is 6 mm of lower parts and he noticed it ]... Examining-point which is different as compared with normal 1 hour ... The metal fittings of the tail lamp installation base had interfered with the main part frame.
Metal-fittings processing is carried out with sander, and a bolt does not suit easily at the time of clear 3 tail bar attachment (although it seemed that the bolt hole location was narrow as it has swollen at the time of molding).
Although after wearing which is attached almost forcibly has a feeling of unification of a carbon design and it is very much satisfied, it is quite ??? at product precision.
Since it is clearly amusing compared with other products of A-TECH, they are goods to examine again.
View detail
Fits: HONDA CB400 FOUR, HONDA CB400 VerS, KAWASAKI ZR-7, HONDA CB500F, Others , KAWASAKI BALIUS II, KAWASAKI BALIUS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA HORNET250, HONDA VTR250, HONDA CB400 SF
Compared with normal, it changes to modern touch and is large satisfaction. Since the lens cover is PURA, compared with the glass of normal, some weight saving is also expectable. It was thought that the color of a lens was thin rather than having
Compared with normal, it changes to modern touch and is large satisfaction.
Since the lens cover is PURA, compared with the glass of normal, some weight saving is also expectable.
It was thought that the color of a lens was thin rather than having seen with a photograph.
View detail