Reviews
Harder Brush
The Nylon brush is harder than I expected.
I wonder if a Paint brush would be safer considering the scratches.
It is
The waist is strong and can reach deep into tight places. is it good?
View detail
For Parts Cleaning
[How is it used?
Used to clean Engine Parts of vehicles under Restore.
When I watch Restore videos, they all use a similar Brush, so where do they sell it? I was wondering, but when I went searching I found a few that are normal.
We purchased this product, which was relatively inexpensive among them.
Was the one you received as per Image?
It is just the right Size as shown in the picture.
Also, although the bristles are firm, I personally felt that they could be a little firmer. I personally felt that it could be a little firmer.
How was your experience with it?
The PVCNylon bristles, however, are not as firm, so it is somewhat difficult to remove stubborn dirt.
I think it is sufficient to remove ordinary dirt.
The hairs did not fall out during use.
[Points to note]
If you do not choose the right place to use it, you may scratch your car.
How did it compare to other products?
I used to do my best with Tooth Brush, but it was small and sometimes took quite a long time.
I felt that this product would be more suitable for use in non-narrow areas, etc.
【Review】
It was easy to use and inexpensive and necessary and sufficient for cleaning Parts.
Personally, I thought the hair could have been a little firmer.
View detail
Fine car wash good
It seems to be suitable for fine car washing.
Will use for next car wash.
View detail
Works great for washing narrow crevices!
[How is it used?
This cylindrical Car Wash Brush is useful for washing narrow crevices when washing a car.
Was the one you received as per Image?
The total length was longer than I expected.
Considering my carrying and storage situation, another 5 cm shorter would have been perfect.
How was your experience with it?
I forget the Manufacturer, but the diameter of the Brush is thinner than the similar product I used to use, making it easier to insert the Brush into more detailed areas.
Brush's hair is quite firm.
I don't think anyone uses it, but it should not be used on Tanks, Screens, or other areas where fine scratches caused by car wash are a concern.
As the product name says "Engine brush", it is designed to be used on areas that do not get scratched or bothered by washing.
I use it in places that are difficult to wash with Sponge or regular Brush, such as the gap between engines, the gap between spokes, and the gap between exhaust pipes.
It was a pleasant realization that not only can hard-to-wash areas be cleaned, but it is also much more efficient than washing with Dustcloth, etc., so the time spent washing the car can be reduced.
As shown in the product image, the needle Gold of the core can also be bent gnarly.
The needle Gold in the core is quite hard, so it can be washed well even when bent.
[Points to note]
Rubber cap is attached to the tip of the Gold needle, which is the core of Brush.
In the unlikely event that this is not noticed coming off, it is likely to cause serious damage to the vehicle body.
Does it have a rubber cap?" and it is safer to look at it from time to time (a similar product I used in the past had a rubber cap that came off).
*Parts that cannot be used
It cannot be used for areas that must be bent internally, such as the inside of a Handlebar Pipe.
As mentioned above, the core needle Gold bends, but it is quite stiff. It does not bend flexibly to fit the other side while inserting it into a gap.
View detail
Easy to use
Brush can be used with hose connected, so dirt can be removed while flushing with water.
It is useful for removing dirt from Wheel and is effective for heavily soiled areas.
View detail
Easy to use
The hardness of the Brush is just right and is useful for cleaning aluminum wheels, etc.
It is scratch resistant and the Brush is just the right length to get into the crevices and scrape dirt out.
The wheel is easy to hold and polish, so wheel cleaning during car wash can be done efficiently.
View detail
Ideal for tight spaces
The small size of the Brush makes it convenient for cleaning hard-to-reach areas.
It is easy to use and removes stains cleanly.
The ends of the hair are not hard enough to cause damage, so they can be used without worry.
View detail
easy to wash
It is easy to work with when used to remove dirt from undercarriage and Tire.
Brush is soft, so it does not scratch and removes stains even when washed hard.
It is convenient to connect the hose to allow water to flow through.
View detail
Can be used in tight spaces
The long, narrow shape and long grips enable washing of a large area at once for greater efficiency.
It is also effective for washing hard-to-reach Roof, reaching into tight crevices.
The softness of the Songe makes it safe to use.
View detail
Easy to use
I use it to wash the engine fin. The minus shaped part of the handle is used to clean the gaps by applying Dustcloth.
The Brush section is prone to heaving, so care should be taken.
View detail
It's so much easier to wash the undercarriage when you have it.
It is very easy to scrub the undercarriage while standing up.
Also, off-road boots are much easier than using a scrubbing brush.
I used it to wash my motorcycle a couple of times, and the last time I polished my car's wheels, I pushed it through a narrow space, and the tip broke off. It's still usable, but...
It's cheap and not painful at all.
View detail
Convenient for cleaning hard-to-reach areas.
When you wash your car, the inside of the engine, etc., you can't use your brush.
I bought this to clean areas I can't reach.
Flexible, so you can use BrushBody in the right place.
It can be bent.
Brush is hard, so Engine fin, Suspension, etc.
It is useful for cleaning hard-to-reach areas, but Frame
If you rub a painted surface or a shiny resin part such as
Be aware that polishing scratches may occur.
View detail
To clean the Spoke wheel
[How is it used?
I bought this to clean the Spoke wheels on my KLX250 and D Tracker 125.
How was your experience with it?
The width of the Brush was just the right Size for the gap between the Spoke.
Cleaning the Spoke wheel is the most annoying part of the car wash process, but this Brush makes it a little easier.
The products we used together.
No. 92." The Brand named "High qualityWasher Type S" was used as a detergent.
I was able to "easily" remove mud stains after driving Off-road, and chain lube splattered from the chain.
https://www.webike.net/sd/23551582/
View detail
So-so comfort
[How is it used?
MainMotorcycle's XJR1300C is mainly used to wash the engine area. The engine is air cooled so it is for small parts.
As for the fin part of the side side, I use the cleaning brush of Minimoto, but the front part of the lower part of the engine and the exhaust pipe side is easy to enter in the opposite direction.
I chose this Brush because I wanted the longest Brush out there.
Was the one you received as per Image?
I thought the brush size was a little smaller than the Image, but I wanted to work on the details, so it was better than the Large size.
I would not recommend this to anyone who wants to wash their car in a crunchy Large bile.
How was your experience with it?
The Yellow Brush has softer bristles and can be washed gently on the engine, while the Blue has very hard bristles and can only be used in a few places.
The purpose was to wash my Engine so it was the right Brush for me, Blue might be good for super stubborn dirt removal.
[Points to note]
The tips of the Yellow Brush are soft, so if you use too much force, the tips will quickly open up and become ruined, so be careful not to use too much force.
On the other hand, the tip of Blue color Brush is very hard, so it may damage the side being polished, not the Brush side. Let's use it gently because this one is worse.
I don't recommend it for the wheel, and I don't recommend it for the chain either. It is so hard that I don't know where to use it, but I use it around Oil pan.
How did it compare to other products?
The fin part of the side side is Minimoto's "Cleaning/Bead cream and Brush" is perfect, just the right length and firmness.
It is highly recommended for washing air-cooled Engine, so please buy it with us.
Part Number:7213
https://www.webike.net/sd/24653086/
View detail
For cleaning the fins of air-cooled engines!
[How is it used?
I use it for the engine wash for Vehicle of XJR1300C of MainMotorcycle which is an air-cooled engine.
Surprisingly, I've been looking for a longer, stiffer Brush like this and it's been very helpful for Engine washes.
Was the one you received as per Image?
I thought the hair was a little shorter than the Image. There was no Scale, so you can use the Keyboard as a guide.
The tips of the bristles are quite stiff and scrape out the dirt well.
How was your experience with it?
It's got a wooden handle, very easy to use! I would recommend this to anyone with another air cooled engine!
If you use it too roughly, the brush can get rough, bent, and loose, so I think it's more than worth the price, but I'd be happy if it was more durable!
[Points to note]
The bristles are hard, so if you wash too hard, you may damage the paint on the Engine, so it's better to be gentle when using it.
It is also not recommended for scratches on the body, etc. It is recommended for stubborn stains on the wheels and undercarriage, off cars, etc.
How did it compare to other products?
The bristles are longer than the other brushes, so you can scrape out the dirt and grime. This brush is recommended for those who want to scrape out fine dirt from deep inside.
I also bought a Brush from Motorun, but it was still not long enough for my Engine fin.... It is just the right length and is very useful.
Also, the fact that the bristles are made of durable PVCNylon and are not affected by solvents is a GoodPoint!
View detail
A little disappointing.
Bought this to make washing my own car (2LClassSedan) easier.
As a result, I felt that for the Cost....
I bought it to make it a little easier to wash the roof because it's a Large one, but the shape doesn't allow for a lot of force. the Reach is long so you can stroke it more widely, but it doesn't allow for a lot of force...
Also, the lather of the car wash shampoo was not very good, because it is Sponge type. I wish there was a Mouton version.
However, it might be useful if you are a MINIVan type such as High ace which is not reachable at all.
If you can reach it, but want to make it a little easier, I wouldn't recommend it.
View detail
For cleaning of small areas
[How is it used?
I usually compete in Enduro races.
When I was washing my car, I used the so-called Car Wash Brush to scrub the car, but the Large Threshold Brush can't reach the small areas.
I was looking for a good Brush, and I found this one.
Was the one you received as per Image?
As per Image
How was your experience with it?
I like the softness of the tips. But it also has a firmness and can be washed well.
In addition, as it is claimed that it is made of material that does not lose to kerosene, it does not scare with Alkali detergent.
[Points to note]
After washing, rinse it under running water and shape it to prolong its life, I think.
How did it compare to other products?
I think the cost performance is high. That's Dr. Minimoto.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I use this detergent in diluted form.
Cleaner for tough grease stains (https://www.webike.net/sd/24635926/)
View detail
You can wash a lot at once.
The long grip and long sponge make it possible to wash a lot of areas at once, which improves the efficiency of car washing. It is especially useful for washing the roof of a high roof car, because the Sponge is soft and easy to use. View detail
Large was also good.
I bought this for the gap.
The pre-cracked Wave process? does a good job!
Well, it's just a regular Brush.
I think this size is easy to use.
View detail
It can be scrubbed.
This is the best for removing dirt from undercarriage and tire. View detail